Effects of Fe and Bi Minor Alloying on Mechanical, Thermal, and Microstructural Properties of Sn-0.7Cu Solder Alloy
Source abstract
Abstract
The effects of adding 0.05 wt.% Fe and 1 wt.% or 2 wt.% Bi on the mechanical, thermal, and microstructural properties of Sn-0.7Cu solder alloy have been investigated. Addition of 0.05% Fe did not change the morphology of the microstructure, so the mechanical properties and melting behavior remained unchanged. Analyses showed that, besides inclusion of Fe in Cu6Sn5 intermetallic compound (IMC), a few FeSn2 IMCs formed in interdendritic regions. On the other hand, addition of 2% Bi to Sn-0.7Cu-0.05Fe alloy increased the yield strength by 97%, from 19.7 MPa to 38.84 MPa. This is because addition of Bi degraded interdendritic regions by reducing the amount of Cu6Sn5 IMC particles and refining primary β-Sn dendrites. Furthermore, differential scanning calorimetry indicated that Bi reduced the melting temperature by 4°C from 232.2°C to 228.1°C for the 2% Bi alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
2. X. Hu, K. Li, and Z. Min, J. Alloys Compd. 566, 239 (2013).10.1016/j.jallcom.2013.03.034 ↗
3. W.R. Osório, L.C. Peixoto, L.R. Garcia, N. Mangelinck-Noël, and A. Garcia, J. Alloys Compd. 572, 97 (2013).10.1016/j.jallcom.2013.03.234 ↗
4. X. Hu, Y. Li, Y. Liu, and Z. Min, J. Alloys Compd. 625, 241 (2015).10.1016/j.jallcom.2014.10.205 ↗
5. W.T. Chen, C.E. Ho, and C.R. Kao, J. Mater. Res. 17, 263 (2002).10.1557/JMR.2002.0036 ↗
6. C.M.L. Wu, D.Q. Yu, C.M.T. Law, and L. Wang, J. Electron. Mater. 31, 928 (2002).10.1007/s11664-002-0185-5 ↗
7. L. Yang, Y. Zhang, J. Dai, Y. Jing, J. Ge, and N. Zhang, Mater. Des. 67, 209 (2015).10.1016/j.matdes.2014.11.036 ↗
8. I. Anderson, Lead-Free Electronic Solders, ed. K.N. Subramanian (New York: Springer, 2007).
9. Q.V. Bui and S.B. Jung, J. Alloys Compd. 560, 54 (2013).10.1016/j.jallcom.2013.01.040 ↗
10. E. Hodúlová, M. Palcut, E. Lechovič, B. Šimeková, and K. Ulrich, J. Alloys Compd. 509, 7052 (2011).10.1016/j.jallcom.2011.03.164 ↗
11. T. Laurila, J. Hurtig, V. Vuorinen, and J.K. Kivilahti, Microelectron. Reliab. 49, 242 (2009).10.1016/j.microrel.2008.08.007 ↗
12. D.A.-A. Shnawah, S.B.M. Said, M.F.M. Sabri, I.A. Badruddin, and F.X. Che, Mater. Sci. Eng. A 551, 160 (2012).10.1016/j.msea.2012.04.115 ↗
13. H.Y. Song, Q.S. Zhu, Z.G. Wang, J.K. Shang, and M. Lu, Mater. Sci. Eng. A 527, 1343 (2010).10.1016/j.msea.2009.10.048 ↗
14. Y.W. Wang, Y.W. Lin, C.T. Tu, and C.R. Kao, J. Alloys Compd. 478, 121 (2009).10.1016/j.jallcom.2008.11.052 ↗
15. K.S. Kim, S.H. Huh, and K. Suganuma, Microelectron. Reliab. 43, 259 (2003).10.1016/S0026-2714(02)00239-1 ↗
16. D. Shnawah, M. Sabri, I. Badruddin, S. Said, T. Ariga, and F. Che, J. Electron. Mater. 42, 470 (2013).10.1007/s11664-012-2343-8 ↗
17. S.H. Kim and J. Yu, Scr. Mater. 69, 254 (2013).10.1016/j.scriptamat.2013.04.010 ↗
18. A.A. El-Daly, A.M. El-Taher, and S. Gouda, J. Alloys Compd. 627, 268 (2015).10.1016/j.jallcom.2014.12.034 ↗
19. J. Zhou, Y. Sun, and F. Xue, J. Alloys Compd. 397, 260 (2005).10.1016/j.jallcom.2004.12.052 ↗
20. R. Pandher and R. Healey, in 58th Electronic Components and Technology Conference (ECTC) (2008).
21. R.S. Pandher, B.G. Lewis, R. Vangaveti, and B. Singh, in 57th Electronic Components and Technology Conference (ECTC) (2007).
22. Y. Liu, F. Sun, H. Zhang, and Y. Wang, in IEEE 6th International Forum on Strategic Technology (IFOST) (2011).
23. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).10.1007/s11664-998-0074-7 ↗
24. M. He and V.L. Acoff, J. Electron. Mater. 35, 2098 (2006).10.1007/s11664-006-0319-2 ↗
25. D.A. Shnawah, M.F.M. Sabri, I.A. Badruddin, S.B.M. Said, M.B.A. Bashir, N.M. Sharif, and M.H. Elsheikh, J. Alloys Compd. 622, 184 (2015).10.1016/j.jallcom.2014.10.042 ↗
26. I.E. Anderson and J.L. Harringa, J. Electron. Mater. 35, 94 (2006).10.1007/s11664-006-0190-1 ↗
27. I.E. Anderson and J.L. Harringa, J. Electron. Mater. 33, 1485 (2004).10.1007/s11664-004-0090-1 ↗
28. U. Kattner and W. Boettinger, J. Electron. Mater. 23, 603 (1994).10.1007/BF02653345 ↗
29. T.B. Massalski, H. Okamoto, P. Subramanian, L. Kacprzak, and W.W. Scott, Binary Alloy Phase Diagrams, 2nd ed. (Materials Park: American Society for Metals, 1990).