journal article·2005-12

The effect of forming gas anneal on the oxygen content in bonded copper layer

C. S. Tan, K. N. Chen, A. Fan, R. Reif

Journal of Electronic Materials· Volume 34· Issue 12
Publisher page

Abstract

Using a combination of copper (Cu) thermocompression bonding and silicon wafer thinning, a face-to-face silicon bi-layer layer stack is fabricated. The oxygen content in the bonded Cu layer is analyzed using secondary ion mass spectrometry (SIMS). Copper-covered wafers that are exposed to the air for 12 h and 12 days prior to bonding exhibit 0.08 at.% and 2.96 at.% of oxygen, respectively. However, prebonding forming gas anneal at 150°C for 15 min on 12-day-old Cu wafers successfully reduces the oxygen content in the bonded Cu layer to 0.52 at.%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. A. Rahman and R. Reif, IEEE Trans. VLSI Systems 8, 671 (2000).10.1109/92.902261 ↗
2. C.S. Tan, A. Fan, K.N. Chen, and R. Reif, Proc. IEEE Int. SOI Conf. (Piscataway, NJ: IEEE, 2005), pp. 87–89.
3. C.S. Tan and R. Reif, Electrochem. Solid-State Lett. 8, G147 (2005).10.1149/1.1904506 ↗
4. A. Fan, A. Rahman, and R. Reif, Electrochem. Solid State Lett. 2, 534 (1999).10.1149/1.1390894 ↗
5. K.N. Chen, C.S. Tan, A. Fan, and R. Reif, Electrochem. Solid-State Lett. 7, G14 (2004).10.1149/1.1626994 ↗
6. R. Tadepalli and C.V. Thompson, Proc. IEEE Int. Interconnect Technology Conf. (Piscataway, NJ: IEEE, 2003), pp. 36–38.
7. K. Holloway and P.M. Fryer, Appl. Phys. Lett. 57, 736 (1990).10.1063/1.104051 ↗
8. C.G. Cruzan and H.A. Miley, J. Appl. Phys. 10, 631 (1940).10.1063/1.1712714 ↗
9. C. Ryu (Ph.D. Thesis, Stanford University, 1998), pp. 12–15.
10. P.J. Soininen, K.-E. Elers, V. Saanila, S. Kaipio, T. Sajavaara, and S. Haukka, J. Electrochem. Soc. 152, G122 (2005).10.1149/1.1839491 ↗
11. I. Yoshii, K. Hama, and K. Hashimoto, Proc. IEEE Int. Reliability Phys. Symp. (Piscataway, NJ: IEEE, 1992), pp. 136–140.10.1109/IRPS.1992.363288 ↗