Metallurgical reactions in composite 90Pb10Sn/lead-free solder joints and their effect on reliability of LTCC/PWB assembly
Source abstract
Abstract
Use of 90Pb10Sn solder as a noncollapsible sphere material with 95.5Sn 4Ag0.5Cu and SnInAgCu lead-free solders is investigated. Practical reflow conditions led to strong Pb dissolution into liquid solder, resulting in >20 at.% Pb content in the original lead-free solders. The failure mechanism of the test joints is solder cracking due to thermal fatigue, but the characteristic lifetime of 90Pb10Sn/SnInAgCu joints is almost double that of 90Pb10Sn/95.5Sn4Ag0.5Cu in a thermal cycling test (TCT) over the temperature range from −40°C to 125°C. It is predicted that this is mainly a consequence of the better fatigue resistance of the SnPbInAgCu alloy compared with the SnPbAgCu alloy. Indium accelerates the growth of the intermetallic compound (IMC) layer at the low temperature co-fired ceramic (LTCC) metallization/solder interface and causes coarsening of IMC particles during the TCT, but these phenomena do not have a major effect on the creep/fatigue endurance of the test joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. N. Okinaga, H. Kuroda, and Y. Nagai, Proc. 51st Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 1345–1349.
2. O. Nousiainen, R. Rautioaho, K. Kautio, J. Jääskeläinen, and S. Leppävuori, Soldering Surf. Mount Technol. 17, 32 (2005).10.1108/09540910510613538 ↗
3. T. Kangasvieri, O. Nousiainen, J. Putaala, R. Rautioaho, and J. Vähäkangas, Microelectron. Reliab. 46, 1335 (2006).10.1016/j.microrel.2005.11.003 ↗
4. M. Pecht, Y. Fukuda, and S. Rajagopal, IEEE Trans. Compon. Electron. Packag. Manuf. 27, 221 (2004).10.1109/TEPM.2004.843150 ↗
5. Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Hyperlink: http://europa.eu.int/eur-lex/lex/LexUriServ/LexUriServ.do?uri=OJ:L:2003:037:0019:0023:EN:PDF
6. http://www.leadfreeservice.com/Viromet347.pdf
7. V. Pennanen, M. Tammenmaa, T. Reinikainen, J. Zhu, and W. Lin, Soldering Surf. Mount Technol. 12, 42 (2000).10.1108/09540910010331509 ↗
8. J.E. Semmens and L.W. Kessler, Proc. 35th Annual IEEE Int. Reliability Physics Symp. (Piscataway, NJ: IEEE, 1997), pp. 141–148.
9. O. Nousiainen, R. Rautioaho, S. Leppävuori, A. Uusimäki, and D. Tian, Proc. 13th European Microelectronics and Packaging Conf. (IMAPS, 2001), pp. 172–177.
10. A. Sharif and Y.C. Chan, J Alloys Compd. 390, 67 (2005).10.1016/j.jallcom.2004.08.023 ↗
11. J.C. Suhling et al., Soldering Surf. Mount Technol. 16, 77 (2004).10.1108/09540910410537354 ↗
12. M.L. Huang and L. Wang, Metall. Mater. Trans. A 36A, 1439 (2005).10.1007/s11661-005-0236-7 ↗
13. M.D. Cheng, S.Y. Chang, S.F. Yen, and T.H. Chuang, J. Electron. Mater. 33, 171 (2004).10.1007/s11664-004-0176-9 ↗
14. T.H. Chuang, K.W. Huang, and W.H. Lin, J. Electron. Mater. 33, 374 (2004).10.1007/s11664-004-0146-2 ↗
15. X. Zeng, J Alloys Compd. 348, 184 (2003).10.1016/S0925-8388(02)00855-1 ↗
16. R. Rautioaho, O. Nousiainen, S. Leppävuori, J. Lenkkeri, and T. Jaakola, Microelectron. Reliab. 41, 1643 (2001).10.1016/S0026-2714(01)00163-9 ↗
17. M.J. Chiang, S.Y. Chang, and T.H. Chuang, J. Electron. Mater. 33, 34 (2004).10.1007/s11664-004-0291-7 ↗
18. A. Zribi, A. Clark, L. Zavalij, P. Borgesen, and C.J. Cotts, J. Electron. Mater. 30, 1157 (2001).10.1007/s11664-001-0144-6 ↗
19. W.-C. Luo and C.R. Kao, Proc. 4th Int. Symp. on Electronic Materials and Packaging (Piscataway, NJ: IEEE, 2002), pp. 330–334.
20. C.E. Ho, L.C. Shiau, and C.R. Kao, J. Electron. Mater. 31, 1264 (2002).10.1007/s11664-002-0019-5 ↗
21. S.-W. Kim, J.-W. Yoon, and S.-B. Jung, J. Electron. Mater. 33, 1182 (2004).10.1007/s11664-004-0121-y ↗
22. W. Kinzy Jones, Y. Liu, M.A. Zampino, and G. Gonzalez, Int. J. Microcircuits Electron. Packag. 20, 150 (1997).
23. A. Syed and M. Doty, Proc. 49th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1999), pp. 111–117.