journal article·2006-05

Mechanical properties of intermetallic compounds on lead-free solder by moiré techniques

Iting Tsai, Enboa Wu, S. F. Yen, T. H. Chuang

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

In this paper, methods for determining elastic moduli and coefficients of thermal expansion (CTE) of intermetallic compounds (IMC) formed at the interfaces between lead-free solder and metal substrates are presented. For the determination of elastic moduli, two kinds of lead-free solder—SnZn and Sn—were used; the metal substrates were copper and nickel. Nanoindentation techniques were adopted to determine the elastic moduli of Cu33.5Zn66.6, Cu3Sn, Cu6Sn5, and Ni3Sn4. Results for Cu33.5Zn66.6 are new to the literature, and others values are in good agreement with those presented in the literature. On the other hand, for CTE determination, two moire techniques, namely reflection moire and shadow moire, were developed to measure the deformation of IMC/metal composite structures subjected to thermal loading. Finite-element analyses using ANSYS were then performed as a convolutional process, and the genetic search algorithm was used to optimally obtain the CTE of IMC. The CTE of Cu33.5Zn66.6 was found to be approximate to that of copper, and the CTE of Cu3Sn was 10% larger. This method is also applicable to on-wafer films and IMC on micrometer order, such as the case of solder/IMC/under bump metallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. R.R. Chromik, R.P. Vinci, S.L. Allen, and M.R. Notis,J. Mater. Res. 18, 2251 (2003).10.1557/JMR.2003.0314 ↗
2. J.S. Kang, R.A. Gagliano, G. Ghosh, and M.E. Fine,J. Electron. Mater. 31, 1238 (2002).10.1007/s11664-002-0015-9 ↗
3. M. Lee, Y. Hwang, M. Percht, J. Park, Y. Kim, and W. Liu, 2004 Electronic Components and Technology Conf. Proc. (Piscataway, NJ: IEEE, 2004), pp. 901–905.
4. G.Y. Jang, J.W. Lee, and J.G. Duh,J. Electron. Mater. 33, 1103 (2004).10.1007/s11664-004-0111-0 ↗
5. C.A. Sciammarella,Exp. Mech. 22, 418 (1982).10.1007/BF02326823 ↗
6. A. Asundi,Exp. Mech. 34, 230 (1994).10.1007/BF02319760 ↗
7. I. Tsai, C.Z. Tsai, E. Wu, and C.A. Shao,Proceedings of IMAPS Taiwan Technique Symposium (Washington, D.C.: IMAPS, 2001), pp. 290–297.
8. F.P. Chiang,Exp. Mech., 377 (1972).10.1007/BF02321696 ↗
9. Image Processing Toolbox User’s Guide (Natick, MA: The MathWorks, Inc., 1997).
10. K. Creath,Prog. Opt. 26, 351 (1998).
11. R.J. Fields, S.R. Low III, and G.K. Lucey, Jr.,The Metal Science of Joining, ed. M.J. Cieslak, J.H. Perepezko, S. Kang, and M.E. Glicksman (Warrendale, PA: TMS, 1992), pp. 165–173.
12. N. Jiang, J.A. Chromik, and E.J. Cotts,Scr. Mater. 37, 1851 (1997).10.1016/S1359-6462(97)00355-2 ↗