journal article·2007-05-17

Magnetic Nanocomposite for Potential Ultrahigh Frequency Microelectronic Application

Hai Dong, Adam Meininger, Hongjin Jiang, Kyoung-Sik Moon, C. P. Wong

Journal of Electronic Materials· Volume 36· Issue 5
Publisher page

Abstract

Cobalt ferrite nanocomposites were investigated as example materials for microelectronic applications in the ultrahigh frequency range. Both static magnetic properties (magnetization versus applied field curve) and dynamic properties (complex permeability and permittivity at frequencies up to 1 GHz) were studied. When the ferritic density reached a certain level, the coercivity of the composite material decreased and the permeability increased noticeably. This phenomenon indicated the establishment of magnetic coupling between particles, which is necessary for magnetic nanocomposites to be used in electronic applications. Compared to magnetic composites made of micron-sized fillers, the magnetic loss of the nanocomposites was lower. However, the permeability of the nanocomposite was also lower. Cobalt zinc ferrite nanocomposites were prepared to explore the effect of composition, which revealed that the permeability of the magnetic nanocomposite could be improved by modifying the composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Magnetic Properties and Synthesis of Ferrites · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. F. Mazaleyrat, L.K. Varga, J. Magn. Magn. Mater. 215, 253 (2000)10.1016/S0304-8853(00)00128-1 ↗
2. J.Y. Park and M.G. Allen, APEC ′97 Conf. Proc., 12th Ann. (Piscatoway, NJ: IEEE, 1997), vol. 1, pp. 361–36710.1109/APEC.1997.581476 ↗
3. S.C. Tang, S.Y.R. Hui, H.S.-H. Chung, IEEE Trans. Power Electr. 16, 493 (2001)10.1109/63.931055 ↗
4. M. Dikeakos, L.D. Tung, T. Veres, A. Stancu, L. Spinu, and F. Normandin, Materials Research Society Symp. Proc. (2002), 734 (Polymer/Metal Interfaces and Defect Mediated Phenomena in Ordered Polymers), (Warrendale, PA: MRS, 2002) pp. 315–320
5. H. Dong, F. Liu, C.P. Wong, Q. Song, and Z.J. Zhang, Proc. 9th Int. Symp. on Advanced Packaging Materials: Processes, Properties and Interfaces, Atlanta, GA, Mar. 2004, (Piscataway, NJ: IEEE, 2004) pp. 171–174
6. P.M. Raj, P. Muthana, T.D. Xiao, L. Wan, D. Balaraman, I.R. Abothu, S. Bhattacharya, M. Swaminathan, and R.␣Tummala, Proc 10th Int. Symp. on Advanced Packaging Materials: Processes, Properties and Interfaces, Mar. 2005, (Piscataway, NJ: IEEE, 2005) pp. 272–275
7. F. Johnson, A. Hsaio, C. Ashe, D. Laughlin, D. Lambeth, M.E. McHenry, and L.K Varga, Proc. 1st IEEE Conf. on Nanotechnology, Oct. 2001, (Piscataway, NJ: IEEE, 2001) pp. 1–6
8. J.F. Loffler, H.B. Braun, W. Wagner, G. Kostorz, A. Wiedenmann, Mater. Sci. Eng. A 304–306, 1050 (2001)10.1016/S0921-5093(00)01753-6 ↗
9. P. Toneguzzo, O. Acher, G. Viau, F. Fievet-Vincent, F. Fievet, J. Appl. Phys. 81, 5546 (1997)10.1063/1.364657 ↗
10. P. Toneguzzo, G. Viau, O. Acher, F. Guillet, E. Bruneton, F. Fievet-Vincent, F. Fievet, J. Mater. Sci. 35, 3767 (2000)10.1023/A:1004864927169 ↗
11. C. de J. Fernandez, C. Sangregorio, G. Mattei, C. Maurizio, G. Battaglin, F. Gonella, A. Lascialfari, S.L. Russo, D. Gatteschi, P. Mazzoldi, J.M. Gonzalez, and F. D’Acapito, Nucl. Instrum. Methods Phys. Res. B 175–177, 479 (2001)10.1016/S0168-583X(00)00600-5 ↗
12. C. Brosseau, J. Ben-Youssef, P. Talbot, A.M. Konn, J. Appl. Phys. 93, 9243 (2003)10.1063/1.1570935 ↗
13. R. Ramprasad, P. Zurcher, M. Petras, M. Miller, P. Renaud, J. Appl. Phys. 96, 519 (2004)10.1063/1.1759073 ↗
14. J.V. Mantese, A.L. Micheli, D.F. Dungan, R.G. Geyer, J. Baker-Jarvis, J. Grosvenor, J. Appl. Phys. 79, 1655 (1996)10.1063/1.361010 ↗
15. Agilent Technologies Impedance Measurement Handbook, July 2006; Agilent E4991A RF Impedance/Material Analyzer Service Manual, 4th ed. (Santa Clara, CA: Agilent Technologies, Inc., 2006)