Effects of Phenolic Resin Addition on the Electrical Conductivity and Mechanical Strength of Nano-Copper Paste Formed Cu-Cu Joints
Source abstract
Abstract
Cu-Cu joints bonded by nano-copper pastes with different amounts of phenolic resin were developed at a low temperature (240°C) and a low pressure (1 MPa). The shear strengths of the joints were measured and the bonding layers were observed by scanning electron microscopy. The electrical conductivity of the joints was tested by a parameter analyzer. The results indicated that 2% phenolic resin in the pastes doubled the shear strength of Cu-Cu joints compared to joints made with 0%, 5% and 8% phenolic, because it filled the voids and coated sintered Cu nanoparticles in the joints without affecting the electrical conductivity of the Cu-Cu joint. This was because 2% phenolic paste prevented Cu nanoparticles from oxidation. However, 8% phenolic resin led to an increase of electrical resistivity due to the insulating property of phenolic resin, and a decrease of shear strength due to the hindrance to sintering between the nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. H.R. Kotadia, P.D. Howes, and S.H. Mannan, Microelectron. Reliab. 54, 1253 (2014).10.1016/j.microrel.2014.02.025 ↗
2. A. He, T. Osborn, S.A.B. Allen, and P.A. Kohl, Electrochem. Solid-State Lett. 9, 192 (2006).10.1149/1.2353905 ↗
3. Y.-S. Tang, Y.-J. Chang, and K.-N. Chen, Microelectron. Reliab. 52, 312 (2012).10.1016/j.microrel.2011.04.016 ↗
4. VM Dubin, CD Thomas, N Baxter, C Block, V Chikarmane, P McGregor, D Jentz, K Hong, S Hearne and C Zhi, in Proceedings of the IEEE 2001 International (2001), pp. 271–273.
5. T.H. Kim, M.M.R. Howlader, T. Itoh, and T. Suga, J. Vac. Sci. Technol. A 21, 449 (2003).10.1116/1.1537716 ↗
6. J. Lannon, C. Gregory, M. Lueck, A. Huffman and D. Temple, in 59th Electronic Components and Technology Conference (2009), pp. 355–359.
7. P. Buffat and J.P. Borel, Phys. Rev. A 13, 2287 (1976).10.1103/PhysRevA.13.2287 ↗
8. Y. Morisada, T. Nagaoka, M. Fukusumi, Y. Kashiwagi, M. Yamamoto, and M. Nakamoto, J. Electron. Mater. 39, 1283 (2010).10.1007/s11664-010-1195-3 ↗
9. H. Nishikawa, T. Hirano, T. Takemoto, N. Terada, and O. Surf, Sci. J. 3, 60 (2011).
10. T. Yamakawa, T. Takemoto, M. Shimoda, H. Nishikawa, K. Shiokawa, and N. Terada, J. Electron. Mater. 42, 1260 (2013).10.1007/s11664-013-2583-2 ↗
11. Y.Y. Dai, M.Z. Ng, P. Anantha, C.L. Gan and C.S. Tan, in 3D Systems Integration Conference (3DIC), IEEE (2015), pp. TS8. 9.1–TS8. 9.5.
12. K. Schnabl, L. Wentlent, K. Mootoo, S. Khasawneh, A.A. Zinn, J. Beddow, E. Hauptfleisch, D. Blass, and P. Borgesen, J. Electron. Mater. 43, 4515 (2014).10.1007/s11664-014-3478-6 ↗
13. Research Author, in Replacing Solder with All-Copper Interconnects (IBM Research Blog, 2015). https://www.ibm. com/blogs/research/2015/05/replacing-solder-with-all-copper-interconnects . Accessed 29 May 2015.
14. J.R. Groza and R.J. Dowding, Nanostruct. Mater. 7, 749 (1996).10.1016/S0965-9773(96)00046-3 ↗
15. G. Skandan, H. Hahn, B.H. Kear, M. Roddy, and W.R. Cannon, Mater. Lett. 20, 305 (1994).10.1016/0167-577X(94)90035-3 ↗
16. E. Ide, S. Angata, A. Hirose, and K. Kobayashi, Acta Mater. 53, 2385 (2005).10.1016/j.actamat.2005.01.047 ↗
17. W.W. Kwan, V. Kripesh, M.K. Iyer, M. Gupta, A.A.O. Tay and R. Tummala, in Electronics Packaging Technology (2003), pp. 551–556.