journal article·2008-04

Antioxidant-Based Phase-Change Thermal Interface Materials with High Thermal Stability

Yasuhiro Aoyagi, D.D.L. Chung

Journal of Electronic Materials· Volume 37· Issue 4
Publisher page

Abstract

This work provides phase-change thermal interface materials (TIMs) with high thermal stability and high heat of fusion. They are based on antioxidants mainly in the form of hydrocarbons with linear segments. The thermal stability is superior to paraffin wax and four commercial phase-change materials (PCMs). The use of 98.0 wt.% thiopropionate antioxidant (SUMILIZER TP-D) with 2.0 wt.% sterically half-hindered phenolic antioxidant (GA80) as the matrix and the use of 16 vol.% boron nitride particles as the solid component give a PCM with a 100°C lifetime indicator of 5.3 years, in contrast to 0.95 year or less for the commercial PCMs. The heat of fusion is much higher than those of commercial PCMs; the values for antioxidants with nonbranched molecular structures exceed that of wax; the value for one with a branched structure is slightly below that of wax. The phase-change properties are degraded by heating at 150°C much less than those of the commercial PCMs. The stability of the heat of fusion upon phase-change cycling is also superior. The viscosity is essentially unaffected by heating at 150°C. Commercial PCMs give slightly lower values of the thermal contact conductance for the case of rough (12 μm) mating surfaces, in spite of the lower values of the bond-line thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Advanced Thermoelectric Materials and Devices · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. M.H. Nurmawati, K.S. Siow, I.J. Rasiah, Int. J. Polym. Anal. Ch. 9, 213 (2004)10.1080/10236660490920219 ↗
2. F.L. Tan, C.P. Tso, Appl. Therm. Eng. 24, 159 (2004)10.1016/j.applthermaleng.2003.09.005 ↗
3. R. Clarksean and Y. Chen, EEP-Vol. 26-2, Advances in Electronic Packaging (New York, NY: The American Society of Mechanical Engineers, 1999), Vol. 2, pp. 1631–1640
4. B. Zalba, J.M. Marín, L.F. Cabeza, H. Mehling, Appl. Therm. Eng. 23, 251 (2003)10.1016/S1359-4311(02)00192-8 ↗
5. M.M. Farid, A.M. Khudhair, S.A.K. Razack, S. Al-Hallaj, Energ. Convers. Manage. 45, 1597 (2004)10.1016/j.enconman.2003.09.015 ↗
6. S.M. Hasnain, Energ. Convers. Manage. 39, 1127 (1998)10.1016/S0196-8904(98)00025-9 ↗
7. Z. Liu, D.D.L. Chung, Thermochim. Acta 366, 135 (2001)10.1016/S0040-6031(00)00716-4 ↗
8. S.M. Zhang, D. Swarthout, Q.J. Feng, L. Petroff, and T. Noll, ITherm 2002, 8th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Piscataway, NJ: IEEE, 2002), pp. 485–488
9. S.M. Zhang, D. Swarthout, T. Noll, S. Golderbloom, D. Houtman, K. Wall, Advances in Electronic Packaging, Vol. 2 (New York: ASME, 2003), pp. 167–170
10. Y. Aoyagi, C.-K. Leong, D.D.L. Chung, J. Electron. Mater. 35(3), 416 (2006)10.1007/BF02690528 ↗
11. A. Elgafy, K. Lafdi, Carbon 43, 3067 (2005)10.1016/j.carbon.2005.06.042 ↗
12. J.M. Marín, B. Zalba, L.F. Cabeza, H. Mehling, Int. J. Heat Mass Tran. 48, 2561 (2005)10.1016/j.ijheatmasstransfer.2004.11.027 ↗
13. X. Py, R. Olives, S. Mauran, Int. J. Heat Mass Tran. 44, 2727 (2001)10.1016/S0017-9310(00)00309-4 ↗
14. Y. Aoyagi, D.D.L. Chung, J. Mater. Sci. 42, 2358 (2007)10.1007/s10853-007-1600-3 ↗
15. S. Yachigo, M. Sasaki, F. Kojima, Polym. Degrad. Stab. 35, 105 (1992)10.1016/0141-3910(92)90100-J ↗
16. C.-K. Leong, Y. Aoyagi, D.D.L. Chung, J. Electron. Mater. 34, 1336 (2005)10.1007/s11664-005-0259-2 ↗
17. C.-K. Leong, D.D.L. Chung, Carbon 42, 2323 (2004)10.1016/j.carbon.2004.05.013 ↗
18. C.-K. Leong, D.D.L. Chung, Carbon 41, 2459 (2003)10.1016/S0008-6223(03)00247-1 ↗
19. C.-K. Leong, Y. Aoyagi, D.D.L. Chung, Carbon 44, 435 (2006)10.1016/j.carbon.2005.09.002 ↗
20. J.M. Pena, N.S. Allen, M. Edge, C.M. Liauw, B. Valange, Polym. Degrad. Stab. 72, 163 (2001)10.1016/S0141-3910(01)00016-7 ↗
21. T. Yamaguchi, K. Fukuda, and M. Sakai, Total Technology of Polymer Stabilization, ed. Y. Ohkatsu (Tokyo: CMC Publisher, 2005), Ch. 2, p. 78
22. Sumitomo Chemical Co. Product information, http://www.sumitomo-chem.co.jp/kaseihin/2product_data/2_11sumilizer.html , as on Aug. 2, 2007
23. M.T. Huang, H. Ishida, Surf. Interface Anal. 37, 621 (2005)10.1002/sia.2055 ↗
24. S. Sauerbrunn and P. Gill, High resolution TGA kinetics,␣TA␣Instruments, http://www.tainstruments.com/library_download.aspx?file=TA075.PDF , as on Aug. 2, 2007
25. T.A. Howe, C.-K. Leong, D.D.L. Chung, J. Electron. Mater. 35(8), 1628 (2006)10.1007/s11664-006-0209-7 ↗
26. C. Lin and D.D.L. Chung, Carbon 45(15), 2922 (2007)10.1016/j.carbon.2007.10.006 ↗
27. Y. Ohkatsu, Research and Development of Polymer Additives (Tokyo: CMC Publisher, 1998), p. 9