journal article·2006-05

Reliability testing of WLCSP lead-free solder joints

Huann-Wu Chiang, Jun-Yuan Chen, Ming-Chuan Chen, Jeffrey C. B. Lee, Gary Shiau

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

The interfacial reactions of solder joints between Sn-4Ag-0.5Cu solder ball and a couple of presoldered pastes (Sn-7Zn-Al(30ppm) and Sn-3Ag-0.5Cu) were investigated in wafer-level chip-scale package (WLCSP). After appropriate surface mount technology reflow processes on printed circuit boards with a Cu/OSP (organic solderability preservative) surface finish, samples were subjected to 150°C high-temperature storage (HTS) for 1,000 h of aging or 1,000 cycles of a thermal cycling test (TCT). Sequentially, cross-section analysis is scrutinized by scanning electron microscopy/energy dispersive spectrometry and energy probe microanalysis to observe metallurgical evolution in the interface and solder buck itself. It was found that the degradation of the joint shear strength after TCT is more pronounced than that of the shear strength after HTS. Fracture surface analyses of the shear tests show that the degradation of the joint strength for HTS is solely due to the influence of the interfacial IMC grain growth, while the shear strength degradation for TCT is mainly due to the coefficient thermal expansion mismatch from the thermal cycling at the chip-solder interface and can lead to the occurrence of the crack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. P. Garrou,IEEE Trans. Adv. Packag. 23, 198 (2000).10.1109/6040.846634 ↗
2. P. Elenius, S. Barrett, and T. Goodman,IEEE Trans. Adv. Packag. 23, 220 (2000).10.1109/6040.846638 ↗
3. K.C. Chang and K.N. Chiang,J. Electron. Mater. 33, 1373 (2004).10.1007/s11664-004-0167-x ↗
4. H.W. Chiang, J.Y. Chen, J.C.B. Lee, and S.W. Li,J. Electron. Mater. 34, 1550 (2004).10.1007/s11664-004-0097-7 ↗
5. R.A. Fournelle,JOM 55 (6), 49 (2003).10.1007/s11837-003-0140-9 ↗
6. M. Abtew and G. Selvaduray,Mater. Sci. Eng. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
7. S.K. Kang,JOM 54 (6), 25 (2002).10.1007/BF02701844 ↗
8. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang,JOM 53 (6), 28 (2001).10.1007/s11837-001-0099-3 ↗
9. P. Vianco,Handbook of Lead (Pb)-Free Technology for Microelectronic Assembly (New York: Marcel-Dekker, 2004), pp. 167–210.
10. K.S. Kim, S.H. Huh and K. Suganuma,J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
11. K.L. Lin, L.H. Wen, and T.P. Lin,J. Electron. Mater. 27, 97 (1998).10.1007/s11664-998-0197-x ↗
12. K.L. Lin, K.J. Chen, H.M. Hsu, and L. Shi,2003 Electronic Components & Technology Conference (Piscataway, NJ: IEEE, 2003), p. 658.
13. A. Sebaoun, D. Vincent, and D. Treheux,Mater. Sci. Technol. 3, 241 (1987).10.1179/026708387790122800 ↗
14. K.L. Lin and T.P. Liu,Oxid. Met. 50, 255 (1998).10.1023/A:1018840405283 ↗
15. K.L. Lin and L.H. Wen,J. Mater. Sci. 9, 5 (1998).
16. K.L. Lin and Y.C. Wang,J. Electron. Mater. 27, 1205 (1998).10.1007/s11664-998-0070-y ↗