journal article·2010-03

A Study of Plasma-Cleaned Ag-Plated Cu Leadframe Surfaces

Wuhu Li

Journal of Electronic Materials· Volume 39· Issue 3
Publisher page

Abstract

In this study, an Ar plasma was employed to remove the antitarnish layer on Ag-plated Cu leadframe surfaces using various process powers and times. Measurements of the contact angle, field-emission scanning electron microscopy, x-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry were employed to characterize both the Ag and Cu surfaces before and after plasma cleaning. The antitarnish layer on the leadframe surfaces was determined to be benzotriazole and/or its derivatives. Low-power and short-duration plasma treatments did not significantly change the Ag and Cu surfaces in terms of their surface morphologies, and such treatments were not able to totally remove the antitarnish layer. In contrast, a high-power and long-duration plasma treatment made the surfaces slightly smoother and was able to remove the antitarnish layer on both Ag and Cu surfaces. However, cross-contaminations were also detected between the Ag and Cu surfaces during the plasma cleaning process. This cross-contamination is due to redeposition of Ag and Cu atoms during the plasma treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. D.P. Tracy and E.J. Vardaman, Global Semiconductor Packaging Materials Outlook (Austin, TX: SEMI and TechSearch International, 2007)
2. T.Y. Lin, W.S. Leong, K.H. Chua, R. Oh, Y. Miao, J.S. Pan, and J.W. Chai, Microelectron. Reliab. 42, 375 (2002).10.1016/S0026-2714(02)00003-3 ↗
3. S.J. Cho, K.W. Paik, and Y.G. Kim, IEEE Trans. Compon. Packag. Manuf. Technol. B 20, 167 (1997).
4. H.Y. Lee and G.S. Park, J. Mater. Sci. 37, 4247 (2002).10.1023/A:1020012625149 ↗
5. J.T. Huneke and M. Cowens, Electronic Packaging Technology Conference, 1997. Proceedings of the 1st 1997, (1997), p. 208
6. M. Ohring, Materials Science of Thin Films: Deposition and Structure (New York: Academic, 2002), p. 145.10.1016/B978-012524975-1/50007-0 ↗
7. D.B. Graves, IEEE Trans. Plasma Sci. 22, 31 (1994).10.1109/27.281547 ↗
8. J. Park, H.J. Cha, B.S. Kim, Y.B. Jo, J.K. Park, S.Y. Kim, S.C. Shin, M.Y. Shin, K.I. Ouh, and H. Jeon, IEEE Trans. Compon. Packag. Technol. 30, 731 (2007).10.1109/TCAPT.2007.906318 ↗
9. Y.F. Chong, R. Gopalakrishnan, C.F. Tsang, G. Sarkar, S. Lim, and S. Tatti, Microelectron. Reliab. 40, 1199 (2000).10.1016/S0026-2714(00)00047-0 ↗
10. W.H. Li, K. Reingruber, N. Mais, A. Acuesta, and C.A. Yape, 11th Electronic Packaging Technology Conference (EPTC—2009), in press
11. J.H. Hsieh, L.H. Fong, S. Yi, and G. Metha, Surf. Coat. Technol. 112, 245 (1999).10.1016/S0257-8972(98)00779-8 ↗
12. S. Yi, C.Y. Yue, J.H. Hsieh, L. Fong, and S.K. Lahiri, J. Adhes. Sci. Technol. 13, 789 (1999).10.1163/156856199X01018 ↗
13. S. Yi, J.K. Kim, C.Y. Yue, and J.H. Hsieh, Microelectron. Reliab. 40, 1207 (2000).10.1016/S0026-2714(00)00048-2 ↗
14. R.J. Good, J. Adhes. Sci. Technol. 6, 1269 (1992).10.1163/156856192X00629 ↗
15. T. Watanabe, Nano-Plating: Microstructure Control Theory of Plated Film and Data Base of Plated Film Microstructure (Amsterdam: Elsevier, 2004), p. 260.
16. R.R. Thomas, V.A. Brusic, and B.M. Rush, J. Electrochem. Soc. 139, 678 (1992).10.1149/1.2069284 ↗
17. G. Xue and J. Ding, Appl. Surf. Sci. 40, 327 (1990).10.1016/0169-4332(90)90032-U ↗