journal article·2002-11

High creep resistance tin-based alloys for soldering applications

Rodney J. Mccabe, Morris E. Fine

Journal of Electronic Materials· Volume 31· Issue 11
Publisher page

Abstract

Tin-antimony and tin-indium-antimony alloys made using relatively simple processing steps are discussed as potential creep-resistant, lead-free solders. The intermetallic SbSn forms a very advantageous distribution of high aspectratio whiskers, providing a significant composite strengthening effect that is relatively unaffected by aging at temperatures below 100°C. The intermetallic InSb is even more effective than SbSn per volume fraction. Evidently, strong interactions between dislocations and InSb particles are the origin of the creep-rate reduction. Compared to other potential creep-resistant solder alloys, the creep properties of the Sn-Sb and Sn-In-Sb alloys compare favorably, particularly the high volume-fraction Sn-Sb alloys. It is suggested that even better creep resistance could be achieved in alloys containing distributions of both InSb particles and SbSn whiskers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. H. Mavoori, JOM 52 (6), 29 (2000).10.1007/s11837-000-0144-7 ↗
2. H. Mavoori and S. Jin, JOM 52 (6), 30 (2000).10.1007/s11837-000-0145-6 ↗
3. J. Rösler, G. Bao, and A.G. Evans, Acta Metall. Mater. 39, 2733 (1991).10.1016/0956-7151(91)90090-N ↗
4. G. Bao, J.W. Hutchinson, and R.M. McMeeking, Acta Metall. Mater. 39, 1871 (1991).10.1016/0956-7151(91)90156-U ↗
5. J.L. Marshall, J. Calderon, J. Sees, G. Lucey, and J.S. Hwang, IEEE Trans. Comp., Hybrids, Manuf. Technol. 14, 698 (1991).10.1109/33.105119 ↗
6. M. McCormack, S. Jin, and G.W. Kammlott, IEEE Trans. Comp., Packag., Manuf. Technol. Part A, 17, 452 (1994).10.1109/95.311755 ↗
7. F. Guo, J.P. Lucas, and K.N. Subramanian, J. Mater. Sci.: Mater. Electron. 12, 27 (2001).
8. R.J. McCabe (Ph.D. thesis, Northwestern University, 2000).
9. R.J. McCabe and M.E. Fine, Metall. Mater. Trans. A 33A, 1531 (2002).10.1007/s11661-002-0075-8 ↗
10. Thermo-calc, ver. L. (Stockholm, Sweden: Foundation for Computational Thermodynamics, 1996).
11. G. Simmons and H. Wang, Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, 2nd ed. (Cambridge, MA: MIT Press, 1971).
12. R.K. Mahidhara, S.M.L. Sastry, I. Turlik, and K.L Murty, Scripta Metall. Mater. 31, 1145 (1994).10.1016/0956-716X(94)90566-5 ↗
13. M.D. Mathew, S. Movva, H. Yang, and K.L. Murty, Creep Behavior of Advanced Materials for the 21st Century, eds. R.S. Mishra, A.K. Mukherjee, and K. Linga Murty (Warrendale, PA: TMS, 1999), pp. 51–59.
14. R.J. McCabe and M.E. Fine, Metall. Mater. Trans. A 33A, 575 (2002).10.1007/s11661-002-0119-0 ↗
15. E. Marquis and D. Dunand, Scripta Mater. 47, 503 (2002).10.1016/S1359-6462(02)00165-3 ↗
16. R. Darveaux and K. Banerji, IEEE Trans. Comp., Hybrids, Manuf. Technol. 15, 1013 (1992).10.1109/33.206925 ↗
17. H. Mavoori, S. Vaynman, J. Chin, B. Moran, L. Keer, and M.E. Fine, Mater. Res. Soc. Symp. Proc. eds. R.C. Sundahl, K.-T. Tu, K.A. Jackson, P. Borgesen (Pittsburgh, PA: Mater. Res. Soc., 1995), pp. 161–175.
18. J.S. Hwang, Z. Guo, and G. Lucey, Surface Mount International, (Pittsburgh, PA: Mater. Res. Soc., 1993), pp. 662–676.
19. B. Chandran, W.F. Schmidt, M.H. Gordon, and R. Djkaria (Paper presented at 1996 ASME Int. Mechanical Engineering Congr. Expo., Atlanta, GA, 17–22 November 1996).