Transient Thermal Behavior of Annular Thermoelectric Cooling System
Source abstract
Abstract
The transient thermal behavior of an exoreversible thermodynamic model of an annular thermoelectric cooler has been studied by one-dimensional unsteady-state heat transfer analysis. Unlike the flat plate geometry of thermoelectric coolers, which have equal heat transfer area at their hot and cold sides, an annular thermoelectric cooler has a higher heat transfer area at its hot side than its cold side. The temperature variations with time at the hot and cold sides of an annular thermoelectric cooler have been predicted for different cooling loads, current flow, variable thermocouple length and with different heat transfer coefficients at its hot side. Finally, the transient thermal behavior of an annular thermoelectric cooler has been compared with a flat plate thermoelectric cooler. It was found that, for typical operating conditions with zero cooling load, the annular thermoelectric cooler can maintain a 2.3-K lower temperature than the flat thermoelectric cooler. It was also found that when the cooling load is 0.055 W/cm2 with the hot side heat transfer coefficient of 0.010 W/cm2 K, the coefficient of performance of the annular thermoelectric cooler is 2.32% higher than the flat thermoelectric cooler.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. S.W. Angrist, Direct Energy Conversion (Boston: Allyn and Bacon, 1976), pp. 121–175.
2. H.J. Goldsmid, Electronic Refrigeration (London: Pion, 1986), pp. 1–14.
3. D.M. Rowe, CRC Handbook of Thermoelectrics (Boca Raton: CRC, 1995), pp. 617–620.10.1201/9781420049718 ↗
4. S.C. Kaushik, Solar Refrigeration and Space Conditioning (Jodhpur: Divyajyoti Prakashan, 1989), pp. 195–208.
5. B. Mathiprakasam, in SCT-93 Short Course on Thermoelectrics November 08, 1993, Yokohama (1993).
6. C.B. Vining, Nat. Mater. 8, 83 (2009).10.1038/nmat2361 ↗
7. S. Manikandan, S.C. Kaushik, and K. Anusuya, in ICEETS-16 International Conference on Energy Efficient Technologies for Sustainability April 08, 2016, Tamilnadu (2016).
8. S.B. Riffat and X. Ma, Int. J. Energy Res. 28, 753 (2004).10.1002/er.991 ↗
9. S. Manikandan and S. Kaushik, Cryogenics 67, 52 (2015).10.1016/j.cryogenics.2015.01.008 ↗
10. M.-J. Huang, R.-H. Yen, and A.-B. Wang, Int. J. Heat Mass Transf. 48, 413 (2005).10.1016/j.ijheatmasstransfer.2004.05.040 ↗
11. M.-J. Huang, P.-K. Chou, and M.-C. Lin, Sens. Actuators A Phys 126, 122 (2006).10.1016/j.sna.2005.10.006 ↗
12. W.-H. Chen, C.-Y. Liao, and C.-I. Hung, Appl. Energy 89, 464 (2012).10.1016/j.apenergy.2011.08.022 ↗
13. Z. Sahin and B.S. Yilbas, Energy Convers. Manag. 65, 26 (2013).10.1016/j.enconman.2012.07.020 ↗
14. H. Ali, A.Z. Sahin, and B.S. Yilbas, Energy Convers. Manag. 78, 634 (2014).10.1016/j.enconman.2013.11.029 ↗
15. Z.-G. Shen, S.-Y. Wu, and L. Xiao, Energy Convers. Manag. 89, 244 (2015).10.1016/j.enconman.2014.09.071 ↗
16. S. Kaushik and S. Manikandan, Energy Convers. Manag. 103, 200 (2015).10.1016/j.enconman.2015.06.037 ↗
17. S. Manikandan and S. Kaushik, Sol. Energy 135, 569 (2016).10.1016/j.solener.2016.06.031 ↗
18. S. Kaushik, S. Manikandan, and R. Hans, Int. J. Heat Mass Transf. 86, 843 (2015).10.1016/j.ijheatmasstransfer.2015.03.069 ↗
19. S.C. Kaushik, S. Manikandan, and R. Hans, J. Electron. Mater. 45, 3400 (2016).10.1007/s11664-016-4465-x ↗
20. S. Manikandan and S. Kaushik, Energy Convers. Manag. 106, 804 (2015).10.1016/j.enconman.2015.10.029 ↗
21. S.C. Kaushik, R. Hans, and S. Manikandan, IJESD Int. J. Environ. Sci. Dev. 7, 615 (2016).10.18178/ijesd.2016.7.8.850 ↗
22. A.K. Menon and S.K. Yee, J. Appl. Phys. 119, 055501 (2016).10.1063/1.4941101 ↗
23. A. Sakai, T. Kanno, K. Takahashi, H. Tamaki, and Y. Yamada, J. Electron. Mater. 44, 4510 (2015).10.1007/s11664-015-4017-9 ↗
24. P.E. Gray and R. Wolfe, J. Electrochem. Soc. 107, 242C (1960).10.1149/1.2427512 ↗
25. G. Hoyos, K. Rao, and D. Jerger, Energy Convers. 17, 45 (1977).10.1016/0013-7480(77)90057-2 ↗
26. G. Hoyos, K. Rao, and D. Jerger, Energy Convers. 17, 23 (1977).10.1016/0013-7480(77)90053-5 ↗
27. K. Landecker and A. Findlay, Solid State Electron. 3, 239 (1961).10.1016/0038-1101(61)90007-7 ↗
28. R.P. Bywaters and H.A. Blum, Energy Convers. 10, 193 (1970).10.1016/0013-7480(70)90033-1 ↗
29. M. Naji, M. Alata, and M.A. Al-Nimr, Proc. Inst. Mech. Eng. Part A J. Power Energy 217, 615 (2003).10.1177/095765090321700604 ↗
30. R. Yang, G. Chen, A.R. Kumar, G.J. Snyder, and J.-P. Fleurial, Energy Convers. Manag. 46, 1407 (2005).10.1016/j.enconman.2004.07.004 ↗
31. C.-H. Cheng, S.-Y. Huang, and T.-C. Cheng, Int. J. Heat Mass Transf. 53, 2001 (2010).10.1016/j.ijheatmasstransfer.2009.12.056 ↗
32. A. Montecucco, J. Buckle, and A. Knox, Appl. Therm. Eng. 35, 177 (2012).10.1016/j.applthermaleng.2011.10.026 ↗
33. B. Huang and C. Duang, Int. J. Refrig. 23, 197 (2000).10.1016/S0140-7007(99)00045-6 ↗
34. J.-H. Meng, X.-D. Wang, and X.-X. Zhang, Appl. Energy 108, 340 (2013).10.1016/j.apenergy.2013.03.051 ↗
35. M.N. Özışık, Finite Difference Methods in Heat Transfer (Boca Raton: CRC Press, 1994), pp. 99–141.