Oxidation Behavior of Molten Tin Doped with Phosphorus
Source abstract
Abstract
The oxidation process of molten tin in air at 280 degrees C was studied. We found that a trace addition of phosphorus to the tin reduced the surface oxidation greatly by forming a protective film. The total thickness of the oxide film formed on the molten Sn-0.007wt.%P alloy was about 36 nm, which was composed of a layer of 6 nm SnO2, 10-15 nm (Sn, P)O, and a transition layer. This oxide film was approximately a quarter of the thickness that formed on pure tin. The oxidized surfaces of different tin alloys were studied by scanning electronic microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Much higher segregation of phosphorus was observed on the subsurface of the oxide film, and the concentration of phosphorus in the oxide film was about 500 times greater than that of the bulk concentration. Based on this result, the segregation of phosphorus on the molten surface could result in the formation of a new protective (Sn, P)O film on the subsurface of the molten tin. It is also suggested that the crystal structure of the oxide film should be studied in the future to confirm the mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. M. Arra, D. Shangguan, S. Yi, R. Thalhammer, H. Fockenberger, IEEE Trans. Elec. Pack. Manu. 25, 289 (2002)10.1109/TEPM.2002.807731 ↗
2. G. Wable, Q.Y. Chu, P. Damodaran, K. Srihari, IEEE Trans. Elec. Pack. Manu. 29, 202 (2006)10.1109/TEPM.2006.882500 ↗
3. T. Iida, R.I.L. Guthrie, The Physical Properties of Liquid Metals. (New York: Oxford University Press, 1993), p. 71
4. W.S. Huang, Tin. (Beijing: Metallurgical Industry Press, 2000), p. 10 (in Chinese)
5. J.F. Kuhmann, K. Maly, A. Preuss, J. Electrochem. Soc. 145, 2138 (1998)10.1149/1.1838608 ↗
6. A.J. Bevolo, J.D. Verhoeven, M. Noack, Surf. Sci. 134, 499 (1983)10.1016/0039-6028(83)90438-7 ↗
7. D. Briggs, M.P. Seah, Practical Surface Analysis, (New York: John Wiley & Sons, 1983), p. 146
8. Z. Wang and D.Q. Yang, Vac. Low. Temp. 9, 51 (1990) (in Chinese)
9. R.W.M. Kwok, XPS Peak Fitting Programme for WIN95/98 XPSPEAK Version 4.1, Department of Chinese, University of Hong Kong
10. http://www.srdata.nist.gov/XPS/
11. J.M. Xiao, C.N. Cao, Principle of Materials Corrosion, (Beijing: Chemical Industry Press, 2002), p. 91 (in Chinese)
12. M.J. Regan, H. Tostmann, P.S. Pershan, O.M. Magnussen, E. Dimasi, B.M. Ocko, M. Deutsch, Phys. Rev. B55, 10786, (1997)10.1103/PhysRevB.55.10786 ↗
13. J.F. Moulder, W.F. Stickle, P.E. Sobol, K.D. Bomben, Handbook of X-ray Photoelectron Spectroscopy, ed. J. Chastain (Eden Prairie: Perkin-Elmer Corp., 1992)