Polyol-based phase-change thermal interface materials
Source abstract
Abstract
Polyol-based phase-change thermal interface materials that exhibit high thermal contact conductance and thermal stability have been developed for microelectronic cooling. By using a diol (polycaprolactone or polyester diol in the form of 2-oxepanone) of molecular weight 1,000–2,000 amu, along with 4 vol.%-hexagonal boron nitride particles, this work attained thermal contact conductance (at 70°C, across copper surfaces) that is higher than that attained by using paraffin wax, polyether glycol, polyethylene glycol, or tetradecanol (in place of the diol) and that attained by commercial phase-change thermal interface materials. The thermal stability of the diol is superior to the other phase change materials mentioned above, although the heat of fusion is lower. Boron nitride is more effective than carbon black (also 4 vol.%) for enhancing the conductance, but carbon black diminishes the heat of fusion less than does boron nitride.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Thermal properties of materials · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. D.D.L. Chung, J. Mater. Eng. Performance 10, 128 (2001).
2. P.K. Schelling, L. Shi, and K.E. Goodson, Mater. Today 8, 30 (2005).10.1016/S1369-7021(05)70935-4 ↗
3. C.-K. Leong, Y. Aoyagi, and D.D.L. Chung, J. Electron. Mater. 34, 1336 (2005).10.1007/s11664-005-0259-2 ↗
4. C.-K. Leong and D.D.L. Chung, Carbon 42, 2323 (2004).10.1016/j.carbon.2004.05.013 ↗
5. C.-K. Leong and D.D.L. Chung, Carbon 41, 2459 (2003).10.1016/S0008-6223(03)00247-1 ↗
6. E.E. Marotta and S.J. Mazzuca, IEEE T. Compon. Packaging T. 28, 102 (2005).10.1109/TCAPT.2004.843153 ↗
7. C.-K. Leong, Y. Aoyagi, and D.D.L. Chung, Carbon 44, 435 (2006).10.1016/j.carbon.2005.09.002 ↗
8. M.H. Nurmawati, K.S. Siow, and I.J. Rasiah, Int. J. Polymer Anal. Ch. 9, 213 (2004).10.1080/10236660490920219 ↗
9. F.L. Tan and C.P. Tso, Appl. Thermal Eng. 24, 159 (2004).10.1016/j.applthermaleng.2003.09.005 ↗
10. R. Clarksean and Y. Chen, EEP-Vol. 26–2, Advances in Electronic Packaging (New York: ASME, 1999), pp. 1631–1640.
11. B. Zalba, J.M. Marín, L.F. Cabeza, and H. Mehling, Appl. Thermal Eng. 23, 251 (2003).10.1016/S1359-4311(02)00192-8 ↗
12. M.M. Farid, A.M. Khudhair, S.A.K. Razack, and S. Al-Hallaj, Energy Convers. Manag. 45, 1597 (2004).10.1016/j.enconman.2003.09.015 ↗
13. S.M. Hasnain, Energ. Convers. Manag. 39, 1127 (1998).10.1016/S0196-8904(98)00025-9 ↗
14. H. Inaba, Int. J. Thermal Sci. 39, 991 (2000).10.1016/S1290-0729(00)01191-1 ↗
15. B. Sandnes and J. Rekstad, Solar Energy, in press.
16. S. Canbazoğlu, A. Şahinaslan, A. Ekmekyapar, Ý.G. Aksoy, and F. Akarsu, Energy Buildings 37, 235 (2005).10.1016/j.enbuild.2004.06.016 ↗
17. A. Sharma, L.D. Won, D. Buddhi, and J.U. Park, Renew. At. Energy 30, 2179 (2005).10.1016/j.renene.2005.01.014 ↗
18. J. Wei, Y. Kawaguchi, S. Hirano, and H. Takeuchi, Appl. Thermal Eng. 25, 2903 (2005).10.1016/j.applthermaleng.2005.02.014 ↗
19. V. Shatikian, G. Ziskind, and R. Letan, Int. J. Heat Mass Transfer 48, 3689 (2005).10.1016/j.ijheatmasstransfer.2004.10.042 ↗
20. Z. Liu and D.D.L. Chung, Thermochim. Acta 366, 135 (2001).10.1016/S0040-6031(00)00716-4 ↗
21. S.M. Zhang, D. Swarthout, Q.J. Feng, L. Petroff, and T. Noll, ITherm 2002, 8th Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems (Piscataway, NJ: IEEE, 2002), pp. 485–488.
22. S.M. Zhang, D. Swarthout, T. Noll, S. Golderbloom, D. Houtman, and K. Wall, Advances in Electronic Packaging (New York: ASME, 2003), vol. 2, pp. 167–170.
23. A. Elgafy and K. Lafdi, Carbon 43, 3067, (2005).10.1016/j.carbon.2005.06.042 ↗
24. J.M. Marín, B. Zalba, L.F. Cabeza, and H. Mehling, Int. J. Heat Mass Transfer 48, 2561 (2005).10.1016/j.ijheatmasstransfer.2004.11.027 ↗
25. X. Py, R. Olives, and S. Mauran, Int. J. Heat Mass Transfer 44, 2727 (2001).10.1016/S0017-9310(00)00309-4 ↗
26. M. Iwahashi, H. Minami, T. Suzuki, M. Koyanagi, H. Yao, K. EMa, and K. Ashizawa, J. Oleo Sci. 50, 693 (2001).10.5650/jos.50.693 ↗
27. U. Domanska and M. Marciniak, Fluid Phase Equilibrium 235, 30 (2005).10.1016/j.fluid.2005.07.009 ↗
28. S.Ó. Jónsdóttir, S.A. Cooke, and E.A. Macedo, Carbohydr. Res. 337, 1563 (2002).10.1016/S0008-6215(02)00213-6 ↗
29. G. Barone, G.D. Gatta, D. Ferro, and V. Placente, J. Chem. Soc., Faraday Trans. 86, 75 (1990).10.1039/ft9908600075 ↗
30. R.A. Talja and Y.H. Roos, Thermochim. Acta 380, 109 (2001).10.1016/S0040-6031(01)00664-5 ↗
31. Q. Zhu, C. Zhang, S. Feng, and J. Chen, J. Appl. Polymer Sci. 83, 1617 (2002).10.1002/app.10173 ↗
32. R.R. Bridgeman, D.R. Titterington, C.R. King, and J.H. Banning, U.S. patent 6,180,692 (2001).
33. J.H. Banning, C.R. King, and D.R. Titterington, U.S. patent 6,110,264 (2000).
34. C.-K. Leong and D.D.L. Chung, J. Electron. Mater. #34, 1336 (2005).10.1007/s11664-005-0259-2 ↗