journal article·2011-09

Correlation Between Sn Grain Orientation and Corrosion in Sn-Ag-Cu Solder Interconnects

Tae-Kyu Lee, Bo Liu, Bite Zhou, Thomas Bieler, Kuo-Chuan Liu

Journal of Electronic Materials· Volume 40· Issue 9
Publisher page

Abstract

The impact of a marine environment on Sn-Ag-Cu interconnect reliability is examined using salt spray exposure followed by thermal cycling. Sn-Ag-Cu solder alloy wafer-level packages, with and without pretreatment with 5% NaCl salt spray, were thermally cycled to failure. The prior salt spray reduced the characteristic lifetime of the Sn-Ag-Cu solder joints by over 43%. Although Sn-based materials show strong resistance to corrosion, the nature of localized corroded areas at critical locations in the solder joint caused significant degradation in the Sn-Ag-Cu solder joints. An important link between the corrosion path and Sn grain orientation was observed using orientation imaging microscopy (OIM). A strong correlation between the corrosion path and grain orientation was identified, indicating that the corrosion attack preferentially followed the basal plane of the Sn lattice.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. F. Song and R. Lee, Proceeding of the 56th Electronic Components and Technology Conference, San Diego, California, May (2006).
2. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
3. A.J. Hale and H.S. Fosteh, J. Soc. Chem. Ind. 9, 2371 (1915).
4. A. Jermstad and A. Gaule, J. Inst. Met. 13, 1370 (1919).
5. B. Liu, T.-K. Lee, and K.-C. Liu, 42nd International Symposium on Microelectronics (IMAPS 2009) Proceedings, San Jose, 3rd November (2009).
6. M. Mori, K. Miura, T. Sasaki, and T. Ohtsuka, Corros. Sci. 44, 887 (2002).10.1016/S0010-938X(01)00094-4 ↗
7. U.S. Mohanty and K. Lin, Corros. Sci. 50, 2437 (2008).10.1016/j.corsci.2008.06.042 ↗
8. R.P. Frankenthal and D.J. Siconolfi, Corros. Sci. 21, 479 (1981).10.1016/0010-938X(81)90077-9 ↗
9. T. Farrell, Met. Sci. 10, 87 (1976).10.1016/0036-9748(76)90334-3 ↗
10. B.Y. Wu, Y.C. Chan, and M.O. Alam, J. Mater. Res. 21, 62 (2006).10.1557/jmr.2006.0022 ↗
11. J.Y. Jung, S.B. Lee, H.Y. Lee, Y.C. Joo, and Y.B. Park, J. Electron. Mater. 37, 1111 (2008).
12. D. Frear, H. Morgan, and J.H. Lau, eds., The Mechanics of Solder Alloy Interconnects (New York: Van Nostrand Reinhold, 1994).
13. J.A. Rayne and B.S. Chandrasekhar, Phys. Rev. 120, 1658 (1960).10.1103/PhysRev.120.1658 ↗
14. D.G. House and E.V. Vernon, Br. J. Appl. Phys. 11, 254 (1960).10.1088/0508-3443/11/6/308 ↗
15. V.T. Deshpande and D.B. Sirdeshmukh, Acta Cryst. 15, 294 (1962).10.1107/S0365110X62000742 ↗
16. T.-K. Lee, B. Zhou, L. Blair, K.-C. Liu, and T.R. Bieler, J. Electron. Mater. 39, 2588 (2010).10.1007/s11664-010-1348-4 ↗
17. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, E.J. Cotts, and B. Nandagopal, IEEE Trans. Compon. Packag. Technol. 31, 370 (2008).10.1109/TCAPT.2008.916835 ↗
18. A.U. Telang, T.R. Bieler, J.P. Lucas, K.N. Subramanian, L.P. Lehman, Y. Xing, and E.J. Cotts, J. Electron. Mater. 33, 1412 (2004).10.1007/s11664-004-0081-2 ↗
19. B. Zhou, T.R. Bieler, T.-K. Lee, and K.-C. Liu, J. Electron. Mater. 38, 2702 (2009).10.1007/s11664-009-0929-6 ↗
20. T.-K. Lee, K.-C. Liu, and T.R. Bieler, J. Electron. Mater. 38, 2685 (2009).10.1007/s11664-009-0873-5 ↗
21. S. Park, R. Dhakal, L. Lehman, and E. Cotts, Acta Mater. 55, 3253 (2007).10.1016/j.actamat.2007.01.028 ↗
22. S. Terashima, T. Kobayashi, and M. Tanaka, Sci. Technol. Weld. Join. 13, 732 (2008).10.1179/136217108X336270 ↗
23. M.A. Matin, E.W.C. Coenen, W.P. Vellinga, and M.G.D. Geers, Scripta Mater. 53, 927 (2005).10.1016/j.scriptamat.2005.06.034 ↗
24. A.U. Telang and T.R. Bieler, Scripta Mater. 52, 1027 (2005).10.1016/j.scriptamat.2005.01.043 ↗
25. A.U. Telang, T.R. Bieler, A. Zamiri, and F. Pourboghrat, Acta Mater. 55, 2265 (2007).10.1016/j.actamat.2006.11.023 ↗
26. M.A. Matin, W.P. Vellinga, and M.G.D. Geers, Mater. Sci. Eng. A 445, 73 (2007).10.1016/j.msea.2006.09.037 ↗
27. A. LaLonde, D. Emelander, J. Jeannette, C. Larson, W. Rietz, D. Swenson, and D.W. Henderson, J. Electron. Mater. 33, 1545 (2004).10.1007/s11664-004-0096-8 ↗
28. T.R. Bieler, T.-K. Lee, and K.-C. Liu, J. Electron. Mater. 38, 2712 (2009).10.1007/s11664-009-0919-8 ↗
29. ASTM B117-09, Standard Practice for Operating Salt Spray (Fog) Apparatus (2009).
30. B. Zhou, T.R. Bieler, G. Wu, S. Zaefferer, T.-K. Lee, and K.-C. Liu, 42nd International Symposium on Microelectronics (IMAPS 2009) Proceedings, San Jose, 3rd November (2009).