journal article·2003-11

Morphological transition of interfacial Ni3Sn4 grains at the Sn-3.5Ag/Ni joint

Jong Hoon Kim, Sang Won Jeong, Hyun Deuk Kim, Hyuck Mo Lee

Journal of Electronic Materials· Volume 32· Issue 11
Publisher page

Abstract

The transition in morphology of Ni3Sn4 grains that formed at the interface between liquid Sn-3.5Ag (numbers are in wt.% unless specified otherwise) solder and Ni substrate has been observed at 250–650°C. The morphological transition of Ni3Sn4 is due to the decrease of entropy of formation of the Ni3Sn4 phase and has been explained well by the change of Jackson’s parameter with temperature. According to the variation of solder joint strength with temperature, it decreased rapidly between 350°C and 450°C, where the thickness of the Ni3Sn4 intermetallic compound (IMC) layer was around 6.5 µm. However, the solder joint strength decreased slowly with an increase of soldering time without a significant drop, although the thickness of the IMC was larger than 6.5 µm. The notable drop of solder joint strength and the fracture mode transition with increase of soldering temperature appears to come from excessive lateral growth of IMC grains between 350°C and 450°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. D.R. Frear, W.B. Jones, and K.R. Kinsman, Solder Mechanics—A State of the Art Assessment (Warrendale, PA: TMS, 1991), p. 95.
2. D.R. Frear and P.T. Vianco, Metall. Mater. Trans. A 25A, 1509 (1994).10.1007/BF02665483 ↗
3. S.W. Yoon, J.-R. Soh, H.M. Lee, and B.-J. Lee, Acta Mater. 45, 951 (1997).10.1016/S1359-6454(96)00253-4 ↗
4. H.M. Lee, S.W. Yoon, and B.-J. Lee, J. Electron. Mater. 27, 1161 (1998).10.1007/s11664-998-0065-8 ↗
5. S.W. Yoon, W.K. Choi, and H.M. Lee, Scripta Mater. 40, 327 (1999).10.1016/S1359-6462(98)00414-X ↗
6. W.K. Choi and H.M. Lee, J. Electron. Mater. 28, 1251 (1999).10.1007/s11664-999-0164-1 ↗
7. W.K. Choi and H.M. Lee, J. Electron. Mater. 29, 1207 (2000).10.1007/s11664-000-0014-7 ↗
8. W.K. Choi, S.W. Yoon, and H.M. Lee, Mater. Trans. JIM 42, 783 (2001).10.2320/matertrans.42.783 ↗
9. S.K. Kang, R.S. Rai, and S. Purusothaman, J. Electron. Mater. 25, 1113 (1996).10.1007/BF02659912 ↗
10. Y.J. Park, N.M. Hwang, and D.Y. Yoon, Metall. Mater. Trans. 27A, 2809 (1996).10.1007/BF02652373 ↗
11. J.H. Kim, S.W. Jeong, and H.M. Lee, submitted to Intermetallics (2003).
12. D. Gur and M. Bamberger, Acta Mater. 46, 4917 (1998).10.1016/S1359-6454(98)00192-X ↗
13. C. Herring, Phys. Rev. 82, 87 (1951).10.1103/PhysRev.82.87 ↗
14. D.S. Fisher and J.D. Weeks, Phys. Rev. Lett. 50, 1077 (1983).10.1103/PhysRevLett.50.1077 ↗
15. M. Drechsler and J.F. Nicholas, J. Phys. Chem. Solids 28, 2609 (1967).10.1016/0022-3697(67)90048-0 ↗
16. E. Fradkin, Phys. Rev. B28, 5338 (1983).10.1103/PhysRevB.28.5338 ↗
17. C. Rottman, Phys. Rev. B29, 328 (1984).10.1103/PhysRevB.29.328 ↗
18. C. Rottman, Phys. Rep. 103, 59 (1984).10.1016/0370-1573(84)90066-8 ↗
19. S. Balibar, D.O. Edwards, and C. Laroche, Phys. Rev. Lett. 42, 782 (1979).10.1103/PhysRevLett.42.782 ↗
20. J. Landau, S.G. Lipson, L.M. Maattanen, L.S. Balfour, and D.O. Edwards, Phys. Rev. Lett. 45, 31 (1980).10.1103/PhysRevLett.45.31 ↗
21. J.E. Avron, L.S. Balfour, C.G. Kuper, J. Landau, S.G. Lipson, and L.S. Schulman, Phys. Rev. Lett. 45, 814 (1980).10.1103/PhysRevLett.45.814 ↗
22. W.K. Burton, N. Cabrera, and F.C. Frank, Phil. Trans. R. Soc. London A243, 299 (1951).10.1098/rsta.1951.0006 ↗
23. C. Jayaprakash, W.F. Saam, and S. Teitel, Phys. Rev. Lett. 50, 2017 (1983).10.1103/PhysRevLett.50.2017 ↗
24. R. Warren, J. Mater. Sci. 7, 1434 (1972).10.1007/BF00574935 ↗
25. R. Warren and M.B. Waldon, Power Metall. 15, 166 (1972).10.1179/pom.1972.15.30.005 ↗
26. T.K. Kang and D.Y. Yoon, Metall. Trans. A 9A, 433 (1978).10.1007/BF02646395 ↗
27. T.K. Kang and D.Y. Yoon, Metall. Trans. A 13A, 1405 (1982).10.1007/BF02642878 ↗
28. W.H. Lee, Y.J. Baik, and D.Y. Yoon, Acta Metall. 41, 1263 (1993).10.1016/0956-7151(93)90177-T ↗
29. E.H. Conrad, Prog. Surf. Sci. 39, 65 (1992).10.1016/0079-6816(92)90006-4 ↗
30. W.K. Choi, S.-Y. Jang, J.H. Kim, K.-W. Paik, and H.M. Lee, J. Mater. Res. 17, 597 (2002).10.1557/JMR.2002.0084 ↗
31. K.A. Jackson, Liquid Metals and Solidification (Cleveland, OH: ASM, 1958), p. 174.
32. B. Sundman, B. Jansson, and J.O. Andersson, CALPHAD 9, 153 (1985).10.1016/0364-5916(85)90021-5 ↗
33. C.-S. Oh, J.-H. Shim, B.-J. Lee, and D.N. Lee, J. Alloys Compounds 238, 155 (1996).10.1016/0925-8388(95)02191-4 ↗
34. G. Ghosh, Metall. Mater. Trans. A 30A, 1481 (1999).10.1007/s11661-999-0085-x ↗
35. G. Ghosh, Northwestern University, unpublished research.