High-temperature variable melting point Sn-Sb lead-free solder pastes using transient liquid-phase powder processing
Source abstract
Abstract
During this investigation, a high-temperature, variable melting point (VMP) Sn-Sb solder paste was developed. The solder was created by mixing pure Sn and Sb powders together with a flux to form a paste. The proper choice of flux composition and Sn powder size resulted in a Sn-10wt.%Sb solder paste that had an initial melting point of 232°C and solder ball formation at peak temperatures as low as 241°C. This represents a significant reduction in the process temperature that would normally be required for a prealloyed solder with a melting point of 250°C. When this solder paste is reheated, significant remelting does not take place until a temperature above 241°C is reached. In this way, the solder exhibits a VMP. Experiments indicate that this VMP behavior is due to isothermal solidification (or freezing) at the solder temperature owing to the partial transient liquid-phase (TLP) behavior of the solder powder paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. R. Ventkatraman, J.R. Wilcox, and S.R. Cain, Metall. Trans. A 28A, 699 (1997).10.1007/s11661-997-0056-z ↗
2. P. Gandhi, C. Gallagher, and G. Matijasevic, J. Electron. Manufacturing 7, 253 (1997).10.1142/S0960313197000269 ↗
3. M.A. Palmer, C.N. Alexander, and B. Nguyen, J. Electron. Mater. 28, 912 (1999).10.1007/s11664-999-0219-3 ↗
4. T. Studnitzky and R. Schmid-Fetzer, J. Electron. Mater. 28, 912 (1999).10.1007/s11664-999-0219-3 ↗
5. X. Qiao and S.F. Corbin, Mater. Sci. Eng. A283, 38 (2000).10.1016/S0921-5093(00)00621-3 ↗
6. S.F. Corbin and P. Lucier, Metall. Trans. A 32A, 971 (2001).10.1007/s11661-001-0354-9 ↗
7. S.F. Corbin and D.J. McIsaac, Mater. Sci. Eng., A346, 132 (2003).10.1016/S0921-5093(02)00530-0 ↗
8. S.F. Corbin, X. Qiao, and J. McIsaac, U.S. patent 6,613,123 (2003).
9. M.E. Loomans and M.E. Fine, Metall. Mater. Trans. A 31A, 1155 (2000).10.1007/s11661-000-0111-5 ↗
10. R.M. German and J.W. Dunlap, Metall. Trans. A 17A, 205 (1986).10.1007/BF02643896 ↗
11. R.N. Lumley and G.B. Schaffer, Scripta Mater. 35, 589 (1996).10.1016/1359-6462(96)00195-9 ↗
12. R.M. German, Liquid Phase Sintering (New York: Plenum Press, 1985).10.1007/978-1-4899-3599-1 ↗
13. S.F. Corbin, Metall. Trans. A 33A, 117 (2002).10.1007/s11661-002-0010-z ↗
14. D. Turriff and S.F. Corbin, Proc. 11th Int. Symp on Processing and Fabrication of Advanced Materials, ed. T.S. Srivatsan and R.A. Varin (Materials Park, OH: ASM International, 2002).
15. A. Lal, R.G. Iacocca and R.M. German, J. Mater. Sci. 35, 4507 (2000).10.1023/A:1004893618493 ↗