journal article·2013-02

Retarding Electromigration in Lead-Free Solder Joints by Alloying and Composite Approaches

Ran Zhao, Limin Ma, Yong Zuo, Sihan Liu, Fu Guo

Journal of Electronic Materials· Volume 42· Issue 2
Publisher page

Abstract

The voids induced by electromigration (EM) can trigger serious failure across the entire cathode interface of solder joints. In this study, alloying and composite approaches showed great potential for inhibiting EM in lead-free solder joints. Microsized Ni, Co, and Sb particles were added to the solder matrix. Cu and Sn particles were added to the melting solder to form in situ Cu6Sn5, which formed a barrier layer in the underbump metallization of flip-chip solder joints. The polarity effect induced by EM was observed to be significantly inhibited in the alloyed and composite solder joints. This indicates that the Sn-Ni, Sn-Co, Sn-Sb, and Cu6Sn5 intermetallic compounds may act as barriers to obstruct the movement of the dominant diffusion species along phase boundaries, which in turn improves the resistance to EM. However, Sb particles could induce crack formation and propagation that might lead to joint fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. K.N. Tu, J. Appl. Phys. 94, 5451 (2003).10.1063/1.1611263 ↗
2. E.C.C. Yeh, W.J. Choi, K.N. Tu, P. Elenius, and H. Balkan, Appl. Phys. Lett. 80, 580 (2002).10.1063/1.1432443 ↗
3. C. Chen and S.W. Liang, J. Mater. Sci. Mater. Electron. 18, 259 (2007).10.1007/s10854-006-9020-8 ↗
4. F. Guo, G.C. Xu, J. Sun, Z.D. Xia, Y.P. Lei, Y.W. Shi, and X.Y. Li, J. Electron. Mater. 38, 2756 (2009).10.1007/s11664-009-0944-7 ↗
5. J.W. Nah, J.O. Suh, and K.N. Tu, J. Appl. Phys. 98, 13715-1 (2005).
6. A. Lee, W. Liu, C.E. Ho, and K.N. Subramanian, J. Appl. Phys. 102, 053507-1 (2007).
7. J.W. Nah, J.O. Suh, K.N. Tu, S.W. Yoon, V.S. Rao, K. Vaidyanathan, and F. Hua, J. Appl. Phys. 100, 123513-1 (2006).
8. I.E. Anderson, J. Mater. Sci. Mater. Electron. 18, 55 (2007).10.1007/s10854-006-9011-9 ↗
9. F. Ren, J.W. Nah, K.N. Tu, B.S. Xiong, L.H. Xu, and J.H.L. Pang, Appl. Phys. Lett. 89, 141914-1 (2006).
10. G.Y. Li, B.L. Chen, X.Q. Shi, S.C.K. Wong, and Z.F. Wang, Thin Solid Films 1, 504 (2006).
11. J.W. Nah, K.W. Paik, J.O. Suh, and K.N. Tu, J. Appl. Phys. 94, 7560 (2003).10.1063/1.1628388 ↗
12. L.M. Ma, G.C. Xu, J. Sun, F. Guo, and X.T. Wang, J. Mater. Sci. 46, 4896 (2011).10.1007/s10853-011-5401-3 ↗
13. L.M. Ma, G.C. Xu, F. Guo, and X.T. Wang, 2011 ICEPT-HDP, 5 (2011).
14. H.W. He, G.C. Xu, and F. Guo, J. Mater. Sci. 44, 2089 (2009).10.1007/s10853-009-3276-3 ↗
15. X.Y. Wang, M.T. Han, L.M. Ma, G.C. Xu, and F. Guo, 2011 ICEPT-HDP, 211 (2011)
16. R.H. Zhang, G.C. Xu, X.T. Wang, F. Guo, and A. Lee, J. Electron. Mater. 39, 2513 (2010).10.1007/s11664-010-1377-z ↗
17. C.C. Chen, S.W. Chen, and C.H. Chang, J. Appl. Phys. 103, 063518 (2008).10.1063/1.2899956 ↗
18. F. Ren, J.W. Nah, J.O. Suh, and K.N. Tu, 10th International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces (2005), p. 66.
19. F. Ren, J.W. Nah, H. Gan, J.O. Sun, K.N. Tu, B.S. Xiong, L.H. Xu, and H.L.J. Pang, Mater. Res. Soc. Proc. 863, 369 (2005).
20. H.T. Ma, Y.F. Zhang, Z.J. Cai, J.C. Suhling, P. Lall, and M.J. Bozack, EuroSimE 2008-Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (2008), p. 1.
21. Y.C. Hsu, C.K. Chou, P.C. Liu, C. Chen, D.J. Yao, T. Chou, and K.N. Tu, J. Appl. Phys. 98, 033523 (2005).10.1063/1.1999836 ↗
22. G.C. Xu, H.W. He, and F. Guo, J. Electron. Mater. 38, 273 (2009).10.1007/s11664-008-0562-9 ↗
23. H.W. He, G.C. Xu, and F. Guo, J. Mater. Sci. 45, 929 (2010).10.1007/s10853-009-4022-6 ↗
24. P.R. Subramanian, D.J. Chakrabarti, and D.E. Laughlin, Phase Diagrams of Binary Copper Alloys (Materials Park, OH: ASM International, 1994), p. 138.
25. V.S. Zemskov, A.D. Belaya, S.A. Roslov, L.V. Chani, and E.F. Pershina, Inorg. Mater. 12, 685 (1976).
26. F. Guo, G.C. Xu, and H.W. He, J. Mater. Sci. 44, 5595 (2009).10.1007/s10853-009-3787-y ↗
27. J. Shen, Y.C. Chan, and S.Y. Liu, Intermet 16, 1142 (2008).10.1016/j.intermet.2008.06.016 ↗
28. H. Gan and K.N. Tu, J. Appl. Phys. 97, 063514 (2005).10.1063/1.1861151 ↗
29. K.N. Tu, T.Y. Lee, J.W. Jang, L. Li, D.R. Frear, K. Zeng, and J.K. Kivilahti, J. Appl. Phys. 89, 4843 (2001).10.1063/1.1357469 ↗
30. E.A. Feest and R.D. Doherty, J. Inst. Met 99, 102 (1971).