Inhibiting AuSn4 Formation by Controlling the Interfacial Reaction in Solder Joints
Source abstract
Abstract
Au was used in an electronic package to protect the conductor from oxidation. However, Au dissolved into solders and reacted with the Sn-rich phase to form AuSn4 during soldering. After aging, Au diffused from AuSn4 toward the solder/metallization interface. If Ni3Sn4 formed at the soldering interface, a layer of AuSn4 was redeposited on Ni3Sn4. In contrast, Au diffused into Cu6Sn5-based intermetallic compounds (IMCs) to produce either (Cu,Au)6Sn5 or (Cu,Ni,Au)6Sn5, while Cu6Sn5 or (Cu,Ni)6Sn5 was formed at the soldering interface. Gibbs free energy evaluation revealed that both (Ni,Au)3Sn4 and (Cu,Au)6Sn5 were more thermodynamically stable than AuSn4. The maximum amount of Au diffused in Ni3Sn4 was 4.6 at.%, while the maximum dissolution of Au in Cu6Sn5 was 24.3 at.% at 150°C. Thus, dissolution of Au in Ni3Sn4 was limited, and residual Au rereacted with Sn to produce the layer-type AuSn4. If Cu6Sn5 formed at the interface, most of the Au in AuSn4 diffused into Cu6Sn5. Consequently, AuSn4 formation could be inhibited by controlling formation of Cu6Sn5 in solder/under-bump metallization (UBM) assemblies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. P.A. Magill, P.A. Deane, J.D. Mis, G.A. Rinne, Multi-Chip Module Conference Proceedings (Los Alamitos: IEEE Computer Society Press, 1996), pp. 28–67
2. J.H. Lau, Flip Chip Technologies (New York: McGraw-Hill, 1996), pp. 26–30
3. D.R. Frear, J.W. Jang, J.K. Lin, C. Zhang, JOM 53, 28 (2001)10.1007/s11837-001-0099-3 ↗
4. D.R. Frear, S. Thomas, Mater. Res. Bull. 28, 68 (2003)10.1557/mrs2003.20 ↗
5. G.R. Blackwell, The Electronic Packaging Handbook, (Florida: CRC Press, 2000), pp. 4.4–4.25
6. A.A. Liu, H.K. Kim, K.N. Tu, P.A. Totta, J. Appl. Phys. 80, 2774 (1996)10.1063/1.363728 ↗
7. H.K. Kim, K.N. Tu, P.A. Totta, Appl. Phys. Lett. 68, 2204 (1996)10.1063/1.116013 ↗
8. M. Abtew, G. Selvaduray, Mat. Sci. Eng.: R: Rep. 27, 95 (2000)10.1016/S0927-796X(00)00010-3 ↗
9. S.K. Kang, R.S. Rai, S. Purushothaman, J. Electron. Mater. 25, 1113 (1996)10.1007/BF02659912 ↗
10. K.N. Tu, K. Zeng, Mater. Sci. Eng. R. 34, 1 (2001)10.1016/S0927-796X(01)00029-8 ↗
11. P.G. Kim, J.W. Jang, T.Y. Lee, K.N. Tu, J. Appl. Phys. 86, 6746 (1999)10.1063/1.371751 ↗
12. Y.C. Sohn, J. Yu, S.K. Kang, W.K. Choi, D.Y. Shih, J. Mater. Res. 18, 4 (2003)10.1557/JMR.2003.0002 ↗
13. C.E. Ho, Y.M. Chen, C.R. Kao, J. Electron. Mater. 28, 1231 (2000)10.1007/s11664-999-0162-3 ↗
14. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, C.R. Kao, J. Electron. Mater. 29, 1175 (2000)10.1007/s11664-000-0010-y ↗
15. C.E. Ho, W.T. Chen, C.R. Kao, J. Electron. Mater. 30, 379 (2001)10.1007/s11664-001-0047-6 ↗
16. A.M. Minor, J.J.W. Morris, J. Electron. Mater. 29, 1170 (2000)10.1007/s11664-000-0009-4 ↗
17. A.M. Minor, J.J.W. Morris, Metall. Mater. Trans. A. 31A, 798 (2000)10.1007/s11661-000-0022-5 ↗
18. K.Y. Lee, M. Li, D.R. Olsen, W.T. Chen, B.T.C. Tan and S. Mhaisalkar, Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL (Piscataway, USA: IEEE, 2001), pp. 478–485
19. T. Taguchi, R. Kato, S. Akita, A. Okuno, H. Suzuki and T.␣Okuno, Proceedings of the 51th Electronic Components & Technology Conference, Orlando, FL (Piscataway, USA: IEEE, 2001), pp. 675–680
20. K. Levis and A. Mawer, Proceedings of the 50th Electronic Components & technology Conference, Las Vegas, Nevada, (Piscataway, USA: IEEE, 2000), pp. 1198–1204
21. A. Syed, Proceedings of the International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces, Chateau Elan, Georgia, (Piscataway, USA: IEEE, 2000), pp. 143–147
22. C.E. Ho, L.C. Shiau, C.R. Kao, J. Electron. Mater. 31, 1264 (2002)10.1007/s11664-002-0019-5 ↗
23. G.Y. Jang, J.G. Duh, J. Electron. Mater. 35, 2061 (2006)10.1007/s11664-006-0314-7 ↗
24. L.Y. Hsiao, J.G. Duh, Solder. Surf. Mt. Technol. 18, 18 (2006)10.1108/09540910610665099 ↗
25. P.Y. Chevalier, Thermochim. Acta 130, 1 (1988)10.1016/0040-6031(88)87045-X ↗
26. T. Jantzen, P.J. Spencer, Calphad-Comput. Coupling Ph. Diagrams Thermochem. 22, 417 (1998)10.1016/S0364-5916(98)00040-6 ↗
27. A.T. Dinsdale, Calphad-Comput. Coupling Ph. Diagrams Thermochem. 15, 317 (1991)10.1016/0364-5916(91)90030-N ↗
28. G. Ghosh, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 30, 1481 (1999)10.1007/s11661-999-0085-x ↗
29. H.S. Liu, J. Wang, Z.P. Jin, Calphad-Comput. Coupling Ph. Diagrams Thermochem. 28, 363 (2004)10.1016/j.calphad.2004.12.002 ↗
30. C.S. Huang, G.Y. Jang, J.G. Duh, J. Electron. Mater. 32, 1273 (2003)10.1007/s11664-003-0022-5 ↗
31. C.S. Huang, G.Y. Jang, J.G. Duh, J. Electron. Mater. 33, 283 (2004)10.1007/s11664-004-0134-6 ↗
32. C.S. Huang, G.Y. Jang, L.Y. Hsiao, J.G. Duh, H. Takahashi, J. Electron. Mater. 33, 1118 (2004)10.1007/s11664-004-0113-y ↗
33. G.Y. Jang, J.G. Duh, J. Electron. Mater. 34, 68 (2005)10.1007/s11664-005-0182-6 ↗
34. G.Y. Jang, J.G. Duh, H. Takahashi, S.W. Lu, J.C. Chen, J. Electron. Mater. 35, 1745 (2006)10.1007/s11664-006-0229-3 ↗
35. R.E. Reed-Hill, R. Abbaschian, Physical Metallurgy Principles (Boston: PWS Publishing Company, 1994)
36. C.S. Huang, J.G. Duh, J. Mater. Res. 18, 935 (2003)10.1557/JMR.2003.0128 ↗
37. C.S. Huang, J.G. Duh, Y.M. Chen, J.H. Wang, J. Electron. Mater. 32, 89 (2003)10.1007/s11664-003-0241-9 ↗
38. L.Y. Hsiao, J.G. Duh, Thin Solid Films 469, 366 (2004)10.1016/j.tsf.2004.08.152 ↗
39. L.Y. Hsiao, S.T. Kao, J.G. Duh, J. Electron. Mater. 35, 81 (2006)10.1007/s11664-006-0188-8 ↗
40. C.Y. Li, G.Y. Chiou, J.G. Duh, J. Electron. Mater. 35, 343 (2006)10.1007/BF02692455 ↗
41. C.R. Lin, S.W. Chen, C.H. Wang, J. Electron. Mater. 31, 907 (2002)10.1007/s11664-002-0182-8 ↗
42. K. Zeng, K.N. Tu, Mater. Sci. Eng. R. 38, 55 (2002)10.1016/S0927-796X(02)00007-4 ↗