Interfacial reactions and mechanical properties of ball-grid-array solder joints using Cu-cored solder balls
Source abstract
Abstract
Interfacial reactions and mechanical properties of the ball-grid-array (BGA) solder joints using monolithic eutectic SnPB and Cu-cored solder balls after reflow and solid-state annealing were investigated. The Cu cores of three different sizes were used in the solder joints. The incorporation of a Cu core into the BGA solder joint effectively inhibits the (Au1−xNix)Sn4 regrouping and the (Cu1−x−yAuxNiy)6Sn5 phase is formed at the joint interface instead. Growth of the intermetallic compounds formed in the monolithic and Cu-cored solder joints approximately obeys the parabolic law. In the Cu-cored solder joints, the larger the Cu core is, the slower the intermetallic compounds grow. The size effect of the Cu core on the intermetallic compound growth results from the inconsistent amount of the outer solder layer. Shear and tensile strengths of the Cu-cored solder joints decrease with increasing solid-state annealing time, and do not have a noticeable relationship with the Cu-core size. Shear and tensile tests also show that the mechanical strength of the Cu-cored solder joint is better than that of the monolithic solder joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. D.H. Daebler, Surf. Mount Technol., p. 43 (1991).
2. Z. Mei, M. Kaufmann, A. Eslambolchi, and P. Johnson, Proc. 48th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1998), pp. 952–961.
3. C.E. Ho, Y.M. Chen, and C.R. Kao, J. Electron. Mater. 28, 1231 (1999).10.1007/s11664-999-0162-3 ↗
4. C.E. Ho, S.Y. Tsai and C.R. Kao, IEEE Trans. Adv. Packaging 24, 493 (2001).10.1109/6040.982835 ↗
5. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, and C.R. Kao, J. Electron. Mater. 29, 1175 (2000).10.1007/s11664-000-0010-y ↗
6. C.E. Ho, Y.L. Lin, J.Y. Tsai, and C.R. Kao, J. Chin. Inst. Chem. Eng. 34, 387 (2003).
7. C.E. Ho, W.T. Chen, and C.R. Kao, J. Electron. Mater. 30, 379 (2001).10.1007/s11664-001-0047-6 ↗
8. A.M. Minor and J.W. Morris, Jr., Metall. Mater. Trans. A 31A, 798 (2000).10.1007/s11661-000-0022-5 ↗
9. A.M. Minor and J.W. Morris, J. Electron. Mater. 29, 1170 (2000).10.1007/s11664-000-0009-4 ↗
10. J.H. Lee, J.H. Park, Y.H. Lee, and Y.S. Kim, J. Mater. Res. 16, 1249 (2001).10.1557/JMR.2001.0175 ↗
11. J.H. Lee, J.H. Park, D.H. Shin, Y.H. Lee, and Y.S. Kim, J. Electron. Mater. 30, 1138 (2001).10.1007/s11664-001-0141-9 ↗
12. J.H. Lee, J.W. Park, D.H. Shin, and Y.S. Kim, J. Electron. Mater. 33, 28 (2004).10.1007/s11664-004-0290-8 ↗
13. K.Y. Lee, M. Li, D.R. Olsen, and W.T. Chen, Proc. 51st Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 478–485.10.1109/ECTC.2001.927770 ↗
14. A. Zribi et al. IEEE Trans. Compon. Packaging Technol. 23, 383 (2000).10.1109/6144.846778 ↗
15. J. Glazer, P.A. Kramer, and J.W. Morris, Proc. Technical Program, Surface Mount Int. (1991), vol. 1, pp. 629–639.
16. P.G. Kim and K.N. Tu, J. Appl. Phys. 80, 3822 (1996).10.1063/1.363336 ↗
17. P.G. Kim and K.N. Tu, Mater. Chem. Phys. 53, 165 (1998).10.1016/S0254-0584(97)02076-2 ↗
18. H.D. Blair, T.Y. Pan. and J.M. Nicholson, Proc. 48th Electronic Components and Technology Conf. (1998), pp. 259–267.
19. C.H. Zhong, S. Yi, and D.C. Whalley, Soldering Surface Mount Technol. 14, 40 (2002).10.1108/09540910210427817 ↗
20. C.E. Ho, L.C. Shiau, and C.R. Kao, J. Electron. Mater. 31, 1264 (2002).10.1007/s11664-002-0019-5 ↗
21. K. Uenishi, T. Saeki, Y. Kohara, K.F. Kobayashi, I. Shoji, M. Nishiura, and M. Yamamoto, Mater. Trans., 42, 756 (2001).10.2320/matertrans.42.756 ↗
22. S. Sakatani, Y. Kohara, K. Uenishi, K.F. Kobayashi, and M. Yamamoto, Proc. Int. Welding and Joining Conf.-Korea (Korea: KIM 2002), pp. 450–455.
23. K. Uenishi, Y. Kohara, S. Sakatani, T. Saeki, K.F. Kobayashi, and M. Yamamoto, Mater. Trans. 43, 1833 (2002).10.2320/matertrans.43.1833 ↗
24. P.A. Totta and R.P. Sopher, IBM J. Res. Develop. 13, 226 (1969).10.1147/rd.133.0226 ↗
25. I. Shohji, Y. Shiratori, H. Yoshida, M. Mizukami, and A. Ichida, Mater. Trans. 45, 754 (2004).10.2320/matertrans.45.754 ↗
26. D. Mu, K. Kondo, and J. Maeda, J. Electrochem. Soc. 152, G68 (2005).10.1149/1.1830354 ↗
27. P. Nash and A. Nash, in: ASM Handbook, Vol. 3, Alloy Phase Diagrams (Materials Park, OH: ASM International, 1992), p. Z.318.
28. E. Zakel (Ph.D. Thesis, Technical University, Berlin, 1994).
29. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
30. C.M. Tsai, W.C. Luo, C.W. Chang, Y.C. Shieh, and C.R. Kao, J. Electron. Mater. 33, 1424 (2004).10.1007/s11664-004-0082-1 ↗