Monitoring the Growth of the α Phase in Tin Alloys by Electrical Resistance Measurements
Source abstract
Abstract
The β phase of tin is stable only down to 13°C. Below that temperature the thermodynamically stable phase is α tin, more commonly known as tin pest. This phase has gained notoriety because of the catastrophic consequences of the transforming metal. Interest in this subject increased after the transition from tin–lead to lead-free solder, driven by European restriction of the use of hazardous substances (RoHS) legislation. Lead-free alloys contain from 95% to 99% tin and could potentially be susceptible to the β/α transformation mentioned above. The nucleation of the α phase takes a long time to occur, months or even years, especially in alloys of tin. For this reason this phenomenon is particularly difficult to study. The growth, however, occurs faster, and this paper describes a procedure for observing and measuring growth based on electrical measurements. Furthermore, a sample preparation technique that considerably accelerates the nucleation in alloys is described. Seven binary alloys were tested with this procedure and ranked in terms of their propensity to transform. Experimental results demonstrated that the α crystal growth is not stopped by alloying, but just decelerated, and that lead and bismuth are the most effective at this. The same procedure was then demonstrated successfully on printed circuit boards and hence is shown to be a general method for monitoring α tin growth in critical field applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. L.D. Brownlee, Nature 166, 482 (1950). doi: 10.1038/166482a0 .10.1038/166482a0 ↗
2. W.L. Williams, ASTM Spec. Tech. Publ. 189, 149 (1956). doi: 10.1520/STP44117S10.1520/STP44117S ↗
3. A. Bornemann, ASTM Spec. Tech. Publ. 189, 129 (1956). doi: 10.1520/STP44116S10.1520/STP44116S ↗
4. E.O. Hall, The Mechanism of Phase Transformations in Metals (London, UK: Institute of Metals, 1955), pp. 87–92.
5. W.J. Plumbridge, J. Mater. Sci: Mater. Electron. 18, 307 (2007). doi: 10.1007/s10854-006-9025-310.1007/s10854-006-9025-3 ↗
6. W.J. Plumbridge, Circuit Word 33, 1 (2007). doi: 10.1108/03056120710723661 .
7. W.J. Plumbridge, J. Electron. Mater. 37, 2 (2008). doi: 10.1007/s11664-007-0165-x .10.1007/s11664-007-0165-x ↗
8. K. Sweatman, S. Suenaga, and T. Nishimura, Proceedings of JEDEX (San Jose, 2005).
9. G.V. Raynor and R.W. Smith, Proc. Roy. Soc. 244A, 101 (1958).10.1098/rspa.1958.0028 ↗
10. J.H. Becker, J. Appl. Phys. 29, 1110 (1958). doi: 10.1063/1.1723369 .10.1063/1.1723369 ↗
11. N.A. Gorynuova, Dokl. Akad. Nauk SSSR 75, 51 (1950).
12. R.R. Rogers and J.F. Fydell, J. Electrochem. Soc. 100, 383 (1953).10.1149/1.2781136 ↗
13. R.G. Wolfson, M.E. Fine and A.W. Ewald, J. Appl. Phys. 31, 1973 (1960).10.1063/1.1735482 ↗
14. D. Di Maio and C. Hunt, J. Mater. Sci: Mater. Electron. 20, 386 (2009). doi: 10.1007/s10854-008-9739-510.1007/s10854-008-9739-5 ↗
15. A. D. Styrkas, Inor. Mat. 39, 8 (2003).
16. J. Murray, D.A. Knopf and A.K. Bertram, Nature, 434, 10 (2005). doi: 10.1038/434010a .10.1038/434010a ↗