journal article·2006-01

Morphology and growth kinetics of intermetallic compounds in solid-state interfacial reaction of electroless Ni-P with Sn-based lead-free solders

M. L. Huang, T. Loeher, D. Manessis, L. Boettcher, A. Ostmann, H. Reichl

Journal of Electronic Materials· Volume 35· Issue 1
Publisher page

Abstract

A comparative study of solid/solid interfacial reactions of electroless Ni-P (15 at.% P) with lead-free solders, Sn-0.7Cu, Sn-3.5Ag, Sn-3.8Ag-0.7Cu, and pure Sn, was carried out by performing thermal aging at 150°C up to 1000 h. For pure Sn and Sn-3.5Ag solder, three distinctive layers, Ni3Sn4, SnNiP, and Ni3P, were observed in between the solder and electroless Ni-P; while for Sn-0.7Cu and Sn-3.8Ag-0.7Cu solders, two distinctive layers, (CuNi)6Sn5 and Ni3P, were observed. The differences in morphology and growth kinetics of the intermetallic compounds (IMCs) at the interfaces between electroless Ni-P and lead-free solders were investigated, as well as the growth kinetics of the P-enriched layers underneath the interfacial IMC layers. With increasing aging time, the coarsening of interfacial Ni3Sn4 IMC grains for pure Sn and Sn-3.5Ag solder was significantly greater than that of the interfacial (CuNi)6Sn5 IMC grains for Sn-0.7Cu and Sn-3.8Ag-0.7Cu solders. Furthermore, the Ni content in interfacial (CuNi)6Sn5 phase slightly increased during aging. A small addition of Cu (0.7 wt.%) resulted in differences in the type, morphology, and growth kinetics of interfacial IMCs. By comparing the metallurgical aspects and growth kinetics of the interfacial IMCs and the underneath P-enriched layers, the role of initial Cu and Ag in lead-free solders is better understood.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. K.N. Tu and K. Zeng, Mater. Sci. Eng. R34, 1 (2001).
2. P.L. Liu and J.K. Shang, Metall. Mater. Trans. 31A, 2867 (2000).10.1007/BF02830352 ↗
3. Y.C. Chan, P.L. Tu, C.W. Tang, K.C. Hung, and K.L. Lai, IEEE Trans. Adv. Packaging 24, 25 (2001).10.1109/6040.909621 ↗
4. R. Aschenbrenner, A. Ostmann, U. Beutler, J. Simon, and H. Reichl, IEEE Trans. CPMT. Part B 18, 334 (1995).
5. EU directive 2002/95/EC, Official J. Eur. Union L37, 19 (2003).
6. D.R. Frear and P.T. Vianco, Metall. Mater. Trans. A A25, 1509 (1994).10.1007/BF02665483 ↗
7. S.F. Dirnfeld and J.J. Ramon, Welding J. 69, 373s (1990).
8. C.M.L. Wu and M.L. Huang, IEEE Trans. Adv. Packaging 28, 128 (2005).10.1109/TADVP.2004.841660 ↗
9. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000).10.1063/1.1321787 ↗
10. K. Zeng, V. Vuorinen, and J.K. Kivilahti, Proc. 51st Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 693–698.
11. Y.C. Sohn, Yu. Jin, S.K. Kang, D.Y. Shin, and W.K. Choi, J. Electron. Mater. 33, 790 (2004).10.1007/s11664-004-0243-2 ↗
12. M. He, W.H. Lau, G. Qi, and Z. Chen, Thin Solid Film 462–463, 376 (2004).10.1016/j.tsf.2004.05.058 ↗
13. K.W. Paik, Y.D. Jeon, and M.G. Cho, Proc. 54th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2004), pp. 675–682.
14. S.W. Kim, J.W. Yoon, and S.B. Jung, J. Electron. Mater. 33, 1182 (2004).10.1007/s11664-004-0121-y ↗
15. M.L. Huang, T. Loeher, A. Ostmann, and H. Reichl, unpublished research (2005).
16. M. He, Z. Chen, and G. Qi, Acta Mater. 52, 2047 (2004).10.1016/j.actamat.2003.12.042 ↗
17. Z. Chen, M. He, and G. Qi, J. Electron. Mater. 33, 1465 (2004).10.1007/s11664-004-0088-8 ↗
18. K.J. Zeng, V. Vuorinen, and J.K. Kivilahti, IEEE Trans. Electron. Packaging Manufacturing 25, 162 (2002).10.1109/TEPM.2002.801648 ↗
19. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho, Proc. 51st Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 1326–1332.
20. C.W. Hwang, K. Suganuma, M. Kiso, and S. Hashimoto, J. Mater. Res. 18, 2540 (2003).10.1557/JMR.2003.0354 ↗
21. Y.C. Sohn, Y. Jin, S.K. Kang, D.Y. Shih, and T.Y. Lee, J. Mater. Res. 19, 2428 (2004).10.1557/JMR.2004.0297 ↗
22. Y.C. Sohn, Yu. Jin, S.K. Kang, D.Y. Shih, and T.Y. Lee, Proc. 55st Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2005), pp. 83–88.
23. H. Matsuki, H. Ibuka, and H. Suka, Sci. Technol. Adv. Mater. 3, 261 (2002).10.1016/S1468-6996(02)00025-6 ↗
24. K. Zeng and K.N. Tu, Mater. Sci. Eng. R38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
25. S.W. Chen, S.H. Wu, and S.W. Lee, J. Electron. Mater. 32, 1188 (2003).10.1007/s11664-003-0010-9 ↗
26. C.H. Kin, S.W. Chen, and C.H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
27. Y.D. Jeon, S. Nieland, A. Ostmann, H. Reichl, and K.W. Paik, J. Electron. Mater. 32, 548 (2003).10.1007/s11664-003-0141-z ↗