High-Operating-Temperature MWIR Detector Diodes
Source abstract
Abstract
The high-operating-temperature (HOT) midwave infrared (MWIR) n-on-p detector has been pursued using the high-density vertically integrated photodiode (HDVIP®) architecture. In this device, arsenic-doped HgCdTe grown by liquid-phase epitaxy (LPE) is used, passivated on both surfaces with interdiffused CdTe. Dark current densities on these diodes as low as 2.5 mA/cm2 normalized to a 5 μm cutoff at 250 K have been demonstrated. 1/f noise at 1 Hz, measured at 250 K, is found to be 6 × 10−11 A/rHz-cm measured on a cutoff of 4.43 μm. These results agree with the theoretical predictions for the devices made.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. T. Ashley and C.T. Elliott, Electron. Lett. 21, 451 (1985)10.1049/el:19850321 ↗
2. M.A. Kinch, Proc. SPIE 4454, 21 (2001)
3. S. Krishnamurthy and T.N. Casselman, J. Electron. Mater. 29 (2000)10.1007/s11664-000-0232-z ↗
4. M.A. Kinch, Proc. SPIE 4369, 566 (2001)10.1117/12.445316 ↗
5. G.L. Hansen and J.L. Schmit, J. Appl. Phys. 54, 1639 (1983)10.1063/1.332153 ↗
6. R.A. Schiebel, IEEE Trans. Electron Dev. ED-41, 768 (1994)10.1109/16.285030 ↗