Interfacial microstructure evolution in Pb-free solder systems
Source abstract
Abstract
The Sn-3.5Ag and Sn-3.0Ag-0.5Cu ball-grid-array solder balls bonded onto Ni/Au metallization exhibited different interfacial morphology after both wetting and solid-state reactions. In contrast to the eutectic-SnPb solder system, both Pb-free systems showed higher solder-ball shear strength after annealing. Reprecipitation of Au as (Au,Ni)Sn4 at the interface, as shown in the eutectic-SnPb solder system, was not observed in both Pb-free solder systems. Instead, Ni3Sn4 and Cu-Sn-Ni-Au intermetallic compounds (IMCs) were found in the SnAg and SnAgCu systems, respectively. In the SnAgCu system, a thick, acicular-Cu-Sn-Ni IMC formed after wetting, but a faceted-Cu-Sn-Ni-Au phase was found with longer annealing. The growth of this interfacial phase in the Sn-3.0Ag-0.5Cu solder system was also slightly inhibited by the addition of Cu, with a formation energy of about 200 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. National Center for Manufacturing Sciences, Lead-Free Solder Project, NCMS Report 0401RE96 (Ann Arbor, MI: National Center for Manufacturing Sciences, 1997).
2. Z. Mei, M. Kaufmann, A. Eslambolchi, and P. Johnson, Proc. 48th Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 1998), pp. 952–961.
3. A. Zribi et al., IEEE Trans. Comp. Packag. Technol. 23, 383 (2000).10.1109/6144.846778 ↗
4. A.M. Minor and J.W. Morris, Jr., J. Electron. Mater. 29, 1170 (2000).10.1007/s11664-000-0009-4 ↗
5. A.M. Minor and J.W. Morris, Jr., Metall. Mater. Trans. A 31A, 798 (2000).10.1007/s11661-000-0022-5 ↗
6. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, and C.R. Kao, J. Electron. Mater. 10, 1175 (2000).10.1007/s11664-000-0010-y ↗
7. M. Li, K.Y. Lee, R. Olsen, W.T. Chen, B.T.C. Tan, and S. Mhaisalkar, IEEE Trans. Electron. Packag. Manuf. 25, 185 (2002).10.1109/TEPM.2002.801649 ↗
8. K.Y. Lee and M. Li, Metall. Mater. Trans. A 32A, 2666 (2001).10.1007/s11661-001-0058-1 ↗
9. W.T. Chen, C.E. Ho, and C.R. Kao, J. Mater. Res. 17, 263 (2002).10.1557/JMR.2002.0036 ↗
10. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
11. J.H. Lee, J.H. Park, Y.H. Lee, and Y.S. Kim, J. Mater. Res. 16, 1249 (2001).10.1557/JMR.2001.0175 ↗
12. A. Zribi, A. Clark, L. Zavalij, P. Borgesen, and E.J. Cotts, J. Electron. Mater. 30, 1157 (2001).10.1007/s11664-001-0144-6 ↗
13. C.K. Shin, Y.J. Baik, and J.Y. Huh, J. Electron. Mater. 30, 1323 (2001).10.1007/s11664-001-0119-7 ↗