journal article·2006-05

A study of electrically conductive adhesives as a manufacturing solder alternative

F. M. Coughlan, H. J. Lewis

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

Soldering processes using tin/lead solder are standard interconnection technologies for electronic manufacturing. These processes are currently under threat from the Waste Electrical and Electronic Equipment and the Restriction of Hazardous Substances (RoHS) environmental directives, issued by the European Union in 2000. These directives explain that solder is to be free from lead by 1986, as lead has been recognized by the European Union as an environmentally harmful material. One solder alternative that has been investigated by the electronics industry is the area of electrically conductive adhesives (ECAs). This paper outlines the electrical and mechanical analysis of two isotropic conductive adhesives where the main properties of joint resistance and adhesive strength were examined before and after different environmental treatments. Joint resistance was measured with a four-probe tester and adhesive strength was examined with the use of shear testing. Cross-sectional and scanning electron microscopy analyses were used to determine problems such as oxidation and moisture absorption that may have an affect on the adhesive properties of the connection. An experimental design was carried out to examine the adhesives on a standard production line. Taguchi analysis was used to determine the build parameters required to produce an optimal adhesive joint. The results show that although ECAs can pass a functionality test, the electrical properties of ECAs are inferior to that of solder with ECAs having a high joint resistance. They also exhibit poor mechanical strength when shear or drop tested and illustrate that current visual inspection techniques used to examine solder joints are not applicable to conductive adhesives.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Directive 2002/95/EC of the European Parliament and of the Council. European Parliament and the Council of the European Union. January 27, 2003.
2. T. Gleditch, H. Hvims, R. Rorgren, and J. Vahakangas,The Nordic Electronics Packaging Guideline—Chapter C: Conductuve Polymers, Level 2: Introduction, [Online]. Available:http://extra.ivf.se/ngl/CPolymerBonding/ChapterC.htm [May 25, 2002].
3. T. Gleditch, H. Hvims, R. Rorgren, and J. Vahakangas,The Nordic Electronics Packaging Guideline—Chapter C: Conductuve Polymers, Level 1: Introduction, [Online]. Available:http://extra.ivf.se/ngl/CPolymerBonding/ChapterC.htm [May 28, 2002].
4. J. Felba, R. Kisiel, and A. Moscicki (Paper presented at 23rd Int. Spring Seminar on Electronics Technology ISSE, Balatonford, Hungary, 2000).
5. J.E. Morris, inConductive Adhesives for Electronic Packaging, ed. L. Johan (Isle of Mann, U.K.: Electrochemical Pubs. Ltd.), pp. 29–35.
6. Y. Shimada, D. Lu, and C.P. Wong (Paper presented at Int. Symp. on Advanced Packaging Materials, 2000).
7. L. Li and J.E. Morris,Reliability and Failure Mechanism of Isotropically Conductive Adhesives Joints (Piscataway, NJ: IEEE, 1995), pp. 114–119.
8. K. Ryszard and M. Andrzej,Proc. 24th IMAPS Conf. (Ryto, Poland: 2000).
9. R.S. Rorgren and J. Liu,IEEE Trans. Components, Packaging and Manufacturing Technol.—Part B, 1995, vol. 18, pp. 305–312.10.1109/96.386266 ↗
10. Acceptability of Electronic Assemblies, ANSI/IPC-A-610, American National Standard, Rev. B, ed. (Washington, D.C.: ANS Institute, 1995), pp. 114–119.
11. C.P. Wong and D. Lu,Recent Advances on Electrically Conductive Adhesives for Electronic Applications (Piscataway, NJ: IEEE, 2000), pp. 121–129.
12. O. Boyle, D.C. Whalley, and D.J. Williams,Proc. ISHM Nordic Conf. (Oslo, Norway: 1992), pp. 138–149.
13. Thermal Shock, MIL-STD-202F (Method 107G), March 28, 1984.
14. J.C. Jagt,IEEE Trans. Compon., Packaging Manufacturing Technol.—Part A, 21, 215 (1998).10.1109/95.705467 ↗
15. Life at Elevated Ambient Temperature, MIL-STD-202F (Method 108A), April 1, 1980.
16. C.P. Wong and D. Lu,Recent Advances on Electrically Conductive Adhesives for Electronics Applications (Piscataway, NJ: IEEE, 2000), pp. 121–129.
17. C.J.M. Lasance,The Coefficient of Thermal Expansion, 1998, Electronics Cooling (Online), Available:http://www.coolingzone.com/Content/Library/Papers/Jan%201998/A.../Jan1998_07.htm [2002].
18. P. Zarrow,The Journal of Surface Mount and Electronic Assembly, 12 (2003).
19. SMTinfo,Electronic Production Part 5: Conductive Adhesives, Terstagge, D, (Online). Available:http://www.smtinfo.net/docs/Electronic%20Production/f.htm.
20. H. Yamagochi and M. Kato,Proc. Nepcom West (Anaheim, CA: 1991). Available at: etd.lib.nsysu.edu.tw/ETD-db/ETD-search/getfile?URN=etd-1016103-084812 Filename=etd-1016103-084812.pdf.
21. H. Huims and H. Ronsberg,Polymer Binding, Nordic Electronic Packaging Guideline CHPLC. Available at: www.extra.ivf.se/ngl/.
22. L. Li and J.E. Morris,Reliability and Failure Mechanism of Isotropically Conductive Adhesive Joints (Piscataway, NJ: IEEE, 1995), pp. 114–119.
23. C.P. Wong and D. Lu, (Paper presented at 4th Int. Conf. on Adhesives Joining & Coating Technology in Electronic Manufacturing, Espoo, Finland, 2000).