Characterization of Self-Formed Ti-Rich Interface Layers in Cu(Ti)/Low-k Samples
Source abstract
Abstract
In our previous studies, thin Ti-rich diffusion barrier layers were found to be formed at the interface between Cu(Ti) films and SiO2/Si substrates after annealing at elevated temperatures. This technique was called self-formation of the diffusion barrier, and is attractive for fabrication of ultralarge-scale integrated (ULSI) interconnects. In the present study, we investigated the applicability of this technique to Cu(Ti) alloy films which were deposited on low dielectric constant (low-k) materials (SiOxCy), SiCO, and SiCN dielectric layers, which are potential dielectric layers for future ULSI Si devices. The microstructures were analyzed by transmission electron microscopy (TEM) and secondary-ion mass spectrometry (SIMS), and correlated with the electrical properties of the Cu(Ti) films. It was concluded that the Ti-rich interface layers were formed in all the Cu(Ti)/dielectric-layer samples. The primary factor to control the composition of the self-formed Ti-rich interface layers was the C concentration in the dielectric layers rather than the enthalpy of formation of the Ti compounds (TiC, TiSi, and TiN). Crystalline TiC was formed on the dielectric layers with a C concentration higher than 17 at.%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and devices · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. S.P. Murarka, Mater. Sci. Eng. Res. 19, 87 (1997). doi: 10.1016/S0927-796X(97)00002-810.1016/S0927-796X(97)00002-8 ↗
2. “The International Technology Roadmap for Semiconductors (ITRS)”, http://www.itrs.net/Links/2003ITRS/Interconnect2003.pdf , 2003
3. M.T. Bohr, Y.A. El-Mansy, IEEE Trans. Electron Dev.. 45, 620 (1998). doi: 10.1109/16.66122310.1109/16.661223 ↗
4. S.P. Murarka, Mater. Sci. Technol. 17, 749 (2001)10.1179/026708301101510564 ↗
5. Y. Morand, Microelectron. Eng. 50, 391 (2000). doi: 10.1016/S0167-9317(99)00307-X10.1016/S0167-9317(99)00307-X ↗
6. M. Moriyama, M. Shimada, H. Masuda, M. Murakami, Trans. Mater. Res. Soc. Jpn. 29, 51 (2004)
7. M. Shimada, M. Moriyama, K. Ito, S. Tsukimoto, M. Murakami, J. Vac. Sci. Technol. B 24, 190 (2006). doi: 10.1116/1.215191010.1116/1.2151910 ↗
8. P.J. Ding, W.A. Lanford, S. Hymes, S.P. Murarka, J. Appl. Phys. 75, 3627 (1994). doi: 10.1063/1.35607510.1063/1.356075 ↗
9. D. Adams, T.L. Alford, N.D. Theodore, S.W. Russell, R.L. Spreitzer, J.W. Mayer, Thin Solid Films 262, 199 (1995). doi: 10.1016/0040-6090(94)05805-910.1016/0040-6090(94)05805-9 ↗
10. C.J. Liu, J.S. Chen, Appl. Phys. Lett. 80, 2678 (2002). doi: 10.1063/1.146891310.1063/1.1468913 ↗
11. C.J. Liu, J.S. Jeng, J.S. Chen, Y.K. Lin, J. Vac. Sci. Technol. B 20, 2361 (2002). doi: 10.1116/1.152055210.1116/1.1520552 ↗
12. M.J. Frederick, R. Goswami, G. Ramanath, J. Appl. Phys. 93, 5966 (2003). doi: 10.1063/1.156645110.1063/1.1566451 ↗
13. M.J. Frederick, G. Ramanath, J. Appl. Phys. 95, 3202 (2004). doi: 10.1063/1.164726410.1063/1.1647264 ↗
14. S. Tsukimoto, T. Morita, M. Moriyama, K. Ito, M. Murakami, J. Electron. Mater. 34, 592 (2005). doi: 10.1007/s11664-005-0070-010.1007/s11664-005-0070-0 ↗
15. S. Tsukimoto, T. Kabe, K. Ito, M. Murakami, J. Electron. Mater. 36, 258 (2007). doi: 10.1007/s11664-007-0094-810.1007/s11664-007-0094-8 ↗
16. K. Ito, S. Tsukimoto, T. Kabe, K. Tada, M. Murakami, J. Electron. Mater. 36, 606 (2007). doi: 10.1007/s11664-007-0097-510.1007/s11664-007-0097-5 ↗
17. J. Perez-Rigueiro, P. Herrero, C. Jimenez, R. Perez-Casero, and J.M. Martinez-Duart, Surf. Interface Anal. 25, 896 (1997). doi:10.1002/(SICI)1096-9918(199710)25:11<896::AID-SIA315> 3.0.CO;2-4
18. The Japan Institute of Metals ed., Metal Databook, 4th ed. (in Japanese) (Tokyo: Maruzen Co., Ltd., 2004), pp. 101
19. D.G. Archer, R.J. Kematick, C.E. Myers, S. Agarwal, E.J. Cotts, J. Chem. Eng. Data 44, 167 (1999). doi: 10.1021/je980212010.1021/je9802120 ↗