Isothermal aging of near-eutectic Sn-Ag-Cu solder alloys and its effect on electrical resistivity
Source abstract
Abstract
Solder joints were prepared from seven eutectic and near-eutectic Sn-based compositions and characterized for electrical resistivity after 100 h and 1,000 h of isothermal aging at 423 K. The solder joint samples were prepared by hand soldering to copper substrates, and the post-heat treatment resistivity was measured at room temperature in a specially designed, four-point probe fixture. Compositions tested included Sn-3.5Ag, Sn-3.7Ag-0.9Cu, Sn-3.0Ag-0.5Cu, Sn-3.6Ag-1.0Cu, and Sn-3.9Ag-0.6Cu. In addition, the effect of a minor addition of a fourth element, designed to improve high-temperature shear strength, was also evaluated in the compositions Sn-3.7Ag-0.6Cu-0.3Co and Sn-3.7Ag-0.7Cu-0.2Fe. The observed changes in electrical resistivity are discussed in terms of microstructural coarsening, diffusional transport from the substrate, and nucleation of precipitate phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. J. Bath, C. Handwerker, and E. Bradley, Circuits Assembly 11, 31 (2000).
2. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
3. I.E. Anderson, T.E. Bloomer, R.L. Terpstra, J.C. Foley, B.A. Cook, and J.L. Harringa, Proc. Int. Brazing and Soldering Conf. (Miami, FL: American Welding Society, 2000), pp. 575–586.
4. I.E. Anderson, B.A. Cook, J.L. Harringa, and R.L. Terpstra, JOM 54, 26 (2002).10.1007/BF02701845 ↗
5. B.A. Cook, I.E. Anderson, J.L. Harringa, and R.L. Terpstra, J. Electron. Mater. 31, 1190 (2002).10.1007/s11664-002-0009-7 ↗
6. T.E. Bloomer (M.S. Thesis, Iowa State University, 1999).
7. B.A. Cook, I.E. Anderson, J.L. Harringa, R.L. Terpstra, J.C. Foley, Ö. Ünal, and F.C. Laabs, J. Electron. Mater. 30, 1214 (2001).10.1007/s11664-001-0152-6 ↗
8. O. Unal, I.E. Anderson, J.L. Harringa, R.L. Terpstra, B.A. Cook, and J.C. Foley, J. Electron. Mater. 30, 1206 (2001).10.1007/s11664-001-0151-7 ↗
9. I.E. Anderson, J.L. Harringa, and B.A. Cook, Materials Transactions of J.I.M., submitted (2003).
10. K.-W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
11. I.E. Anderson, B.A. Cook, J.L. Harringa, and R.L Terpstra, J. Electron. Mater. 31, 1166 (2002).10.1007/s11664-002-0006-x ↗
12. S.K. Kang, W.K. Choi, M.J. Yim, and D.Y. Shih, J. Electron. Mater. 31, 129 (2002).10.1007/s11664-002-0159-7 ↗
13. S. Beckman, B.A. Cook, and M. Akinc, Mater. Sci. Eng. A 299, 94 (2001).10.1016/S0921-5093(00)01410-6 ↗
14. H.E. Boyer and T.L Gall, Metals Handbook (Metals Park, OH: ASM International, 1985), pp. 44–48.
15. M.J. Cieslak, J.H. Perepezko, S. Kang, and M.E. Glicksman, eds., The Metal Science of Joining (Warrendale, PA: TMS, 1992), pp. 171–176.
16. S.K. Kang, J. Horkans, P.C. Andricacos, and R.A. Carruthers, Proc. 49th Electronic Compounds Technology Conf. (Piscataway, NJ: IEEE, 1999) pp. 283–288.