Controlling intermetallic compound growth in SnAgCu/Ni-P solder joints by nanosized Cu6Sn5 addition
Source abstract
Abstract
Nanosized Cu6Sn5 dispersoids were incorporated into Sn and Ag powders and milled together to form Sn-3Ag-0.5Cu composite solders by a mechanical alloying process. The aim of this study was to investigate the interfacial reaction between SnAgCu composite solder and electroless Ni-P/Cu UBM after heating for 15 min. at 240°C. The growth of the IMCs formed at the composite solder/EN interface was retarded as compared to the commercial Sn3Ag0.5Cu solder joints. With the aid of the elemental distribution by x-ray color mapping in electron probe microanalysis (EPMA), it was revealed that the SnAgCu composite solder exhibited a refined structure. It is proposed that the Cu6Sn5 additives were pinned on the grain boundary of Sn after heat treatment, which thus retarded the movement of Cu toward the solder/EN interface to form interfacial compounds. In addition, wetting is an essential prerequisite for soldering to ensure good bonding between solder and substrate. It was demonstrated that the contact angles of composite solder paste was <25°, and good wettability was thus assured.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. S. Choi, T.R. Bieler, J.P. Lucas, and K.N. Subramanian, J. Electron. Mater. 28, 1209 (1999).10.1007/s11664-999-0159-y ↗
2. A.J. Sunwoo, J.W. Morris, Jr., and G.K. Lucey, Jr., Metall. Trans. A 23, 1323 (1992).10.1007/BF02665064 ↗
3. J.H. Lee, D. Park, J.T. Moon, Y.H. Lee, D.H. Shin, and Y.S. Kim, J. Electron. Mater. 29, 1264 (2000).10.1007/s11664-000-0022-7 ↗
4. D. Lin, G.X. Wang, T.S. Srivatsan, M.A. Hajri, and M. Petraroli, Mater. Lett. 53, 333 (2002).10.1016/S0167-577X(01)00503-1 ↗
5. Y. Wu, J.A. Sees, C. Pouraghabagher, L.A. Foster, J.L. Marshall, E.G. Jacobs, and R.F. Pinizzotto, J. Electron. Mater. 22, 769 (1993).10.1007/BF02817353 ↗
6. S.Y. Huang, J.W. Lee, and Z.H. Lee, J. Electron. Mater. 31, 1304 (2002).10.1007/s11664-002-0024-8 ↗
7. R.C. Reno, M.J. Panunto, and B.H. Piekarski, J. Electron. Mater. 26, 11 (1997).10.1007/s11664-997-0125-5 ↗
8. H.S. Betrabet, S.M. McGee, and J.K. McKinlay, Scr. Metall. 25, 2323 (1991).10.1016/0956-716X(91)90023-T ↗
9. J.H. Lau, C.P. Wong, N.C. Lee, and S.W.R. Lee, Electronics Manufacturing: With Lead-Free, Halogen-Free and Conductive-Adhesive Materials (New York: McGraw-Hill, 2003).
10. M.L. Huang, C.M.L. Wu, J.K.L. Lai, and Y.C. Chang, J. Electron. Mater. 29, 1021 (2000).10.1007/s11664-000-0167-4 ↗
11. M.L. Huang, C.M.L. Wu and J.K.L. Lai, J. Mater. Sci.: Mater. Electron. 11, 57 (2000).
12. J.S. Benjamin, Sci. Am. 234, 40 (1976).10.1038/scientificamerican0576-40 ↗
13. H.L. Lai and J.G. Duh, J. Electron. Mater. 32 (4), 215 (2003).10.1007/s11664-003-0212-1 ↗
14. S.T. Kao and J.G. Duh, J. Electron. Mater. 33 (12), 1445 (2004).10.1007/s11664-004-0085-y ↗
15. J.I. Goldstein, Scanning Electron Microscopy and X-ray Microanalysis (New York: Plenum Press, 1981).10.1007/978-1-4613-3273-2 ↗
16. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
17. M. McCormack, G.W. Kammlott, H.S. Chen, and S. Jin, Appl. Phys. Lett. 65, 1233 (1994).10.1063/1.112080 ↗
18. L. Ye, Z.H. Lai, J. Liu, and A. Thölén, Soldering Surf. Mount Technol. 13, 16 (2001).10.1108/EUM0000000006025 ↗
19. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
20. URL: http://www.yikst.com/Page/YIKSTE.html.