Interfacial transfer between copper and polyurethane in chemical-mechanical polishing
Source abstract
Abstract
The interactions between a copper and urethane polishing pads were characterized to investigate the effects of friction on removal mechanisms of a polishing system of copper interconnect wafers in water. In-situ characterization of polished copper and urethane were conducted using Auger and x-ray photoelectron spectroscopy (XPS) analysis techniques. These techniques pinpointed the chemical interactions immediately during polishing. Results indicated that, because of the stimulation of friction, the molecules from the pad transferred to the copper surface, and the oxidized copper surface was transferred to the urethane surface. Without friction, however, such a transformation did not occur and passivation of the copper surface took place. This evidence proves a possible new chemical-mechanical polishing (CMP) mechanism. In addition to the formation and removal of a passivation layer, a transformation layer is formed during CMP because of friction stimulation. This layer is found on both copper and pad surfaces with different chemical bonds. Understanding the transformation layer helps to understand the formation of defects, pad conditioning, and pad life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. F.B. Kaufman, D.B. Thompson, R.E. Broadie, M.A. Jaso, W.L. Gutherie, D.J. Pearson, and M.B. Small, J. Electrochem. Soc. 138, 3460 (1991).10.1149/1.2085434 ↗
2. D. Stein, D. Hetherington, T. Guilinger, and J. Cecchi, J. Electrochem. Soc. 145, 3190 (1998).10.1149/1.1838785 ↗
3. J. Larsen-Basse and H. Liang, Wear 233–235, 647 (1999).10.1016/S0043-1648(99)00248-3 ↗
4. H. Liang, J.M. Martin, B. Vacher, and V. Brusic, “Chemical Wear of Cu CMP,” Fundamentals and Materials Issues in Chemical-Mechanical Polishing of Materials, vol. 613 (Warrendale, PA: MRS, 2001), pp. 613–620.
5. H. Liang, J.M. Martin, and R. Lee, J. Electrochem. Soc. 30, (4), 391 (2001).
6. H. Liang and H. Xu (Oral presentation at the STLE 2001 Annual Meeting, Orlando, FL, May 2001).
7. G.H. Xu and H. Liang, Proc. 6th Int. Conf. Solid-State & IC Technology (Oct. 22–25, 2001, Shanghai, China, 2001), pp. 851–854.
8. H. Liang and G.H. Xu, Proc. 8th Int. VMIC Sept. 25–26, 2001, Santa Clara, CA (2001), pp. 137–140.
9. H. Liang and G. Xu, Scripta Mater., 46, 5 (2002), pp. 343–347.10.1016/S1359-6462(01)01249-0 ↗
10. T. Fischer, Ann. Rev. Mater. Sci. 18, 303 (1988).10.1146/annurev.ms.18.080188.001511 ↗
11. J.M. Martin, Trib. Lett. 6, 1 (1999).10.1023/A:1019191019134 ↗
12. J.T. Dickinson, N.-S. Park, M.-W. Kim, and S.C. Langford, Trib. Lett. 3, 69 (1997).10.1023/A:1019135828336 ↗
13. J.M. Martin, T.L. Mogne, C. Grossiord, and T. Palermo, Trib. Lett. 3, 87 (1997).10.1023/A:1019183711497 ↗
14. S.P. Murarka and R. Gutmann, Annual Report, NY SCOEm Semiconductor Research Corporation, Research Triangle Park, NC, 1994.
15. M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions (Houston, TX: NACE, 1975).
16. O. Kubaschewaki and B.E. Hopkins, Oxidation of Metals and Alloys (London: Butterworths, 1953).
17. J.M. Steigerwald, S.P. Murarka, and R.J. Gutmann, Proc. MRS, SF (Pittsburgh, PA: Materials Research Society, 1995), p. 55.
18. M. Pourbais, Atlas of Electrochemical Equilibria in Aqueous Solutions (Houston, TX: NACE, 1975).
19. J. Oung, J. Lee, and H. Liang, J. CMP 1, 323 (2000).
20. H. Liang and J. Lee, Proc. 5th Int. Conf. on CMP for ULSI Multilevel Interconnection (CMP-MIC) (March 2–3, 2000, Santa Clara, CA, 2000), pp. 206–214.
21. J.E. Huheey, Inorganic Chemistry, 2nd ed. (New York: Harper & Row, 1978), pp. 842–850.
22. G.S. Braely and H.R. Clauser, Materials Handbook, 3rd ed. (New York: McGraw-Hill, Inc., 1991).
23. C.T. Lynch, CRC Handbook of Materials Science, Vol. I, General Properties (Boca Raton, FL: CRC Press, Inc., 1991).
24. M. Hoshino, H. Suehiro, K. Kasai, and J. Komeno, Jpn. J. Appl. Phys. 32, L392 (1993).10.1143/JJAP.32.L392 ↗
25. V. Brusic, D. Scherber, F. Kaufman, R. Kistler, and C. Streinz (Oral presentation at Proc. 1st Symp. on CMP in IC Device Manufacturing, San Antonio, TX, 6–11 October, 1996).
26. C. Streinz, T. Myers, and C. Yu, Proc. 5th Int. Symp. on CMP in IC Device Manufacturing, NJ (1996), p. 159.
27. H. Hirabayashi, M. Higuchi, M. Kinoshita, H. Kaneko, N. Hayasaka, K. Mase, and J. Oshima, Proc. 1st Int. CMP for VLSI/ULSI Multilevel Interconnection Conf. (CMP-MIC) (1996), p. 22.
28. CRC Handbook of Chemistry and Physics, 68th ed., ed. Robert C. Weast, Melvin J. Astte, and William H. Beyer (Boca Raton, FL: CRC, 1987–1988), p. B-89.