Effect of Cross-Interaction between Ni and Cu on Growth Kinetics of Intermetallic Compounds in Ni/Sn/Cu Diffusion Couples during Aging
Source abstract
Abstract
The solid-state, cross-interaction between the Ni layer on the component side and the Cu pad on the printed circuit board (PCB) side in ball grid array (BGA) solder joints was investigated by employing Ni(15 μm)/Sn(65 μm)/Cu ternary diffusion couples. The ternary diffusion couples were prepared by sequentially electroplating Sn and Ni on a Cu foil and were aged isothermally at 150, 180, and 200°C. The growth of the intermetallic compound (IMC) layer on the Ni side was coupled with that on the Cu side by the mass flux across the Sn layer that was caused by the difference in the Ni content between the (Cu1−x Ni x )6Sn5 layer on the Ni side and the (Cu1−y Ni y )6Sn5 layer on the Cu side. As the consequence of the coupling, the growth rate of the (Cu1−x Ni x )6 Sn5 layer on the Ni side was rapidly accelerated by decreasing Sn layer thickness and increasing aging temperature. Owing to the cross-interaction with the top Ni layer, the growth rate of the (Cu1−y Ni y )6Sn5 layer on the Cu side was accelerated at 150°C and 180°C but was retarded at 200°C, while the growth rate of the Cu3Sn layer was always retarded. The growth kinetic model proposed in an attempt to interpret the experimental results was able to reproduce qualitatively all of the important experimental observations pertaining to the growth of the IMC layers in the Ni/Sn/Cu diffusion couple.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. R. Ludwig, N.C. Lee, C. Fan, and Y. Zhang, Solder. Surf. Mount Technol. 14, 19 (2002)10.1108/09540910210444683 ↗
2. M.K. Huang, C. Lee, and P.L. Wu, Solder. Surf. Mount Technol, 17, 3 (2005)10.1108/09540910510613501 ↗
3. S.K. Kang, W.K. Choi, D.Y. Shih, P. Lauro, D.W. Henderson, T. Gosselin, and D.N. Leonard, Proc. 2002 IEEE Elecronic Components and Technology Conf. (2002), pp. 146–153
4. J.J. Sundelin, S.T. Nurmi, T.K. Lepisto, and E.O. Ristolainen, Mater. Sci. Eng. A 420, 55, (2006)10.1016/j.msea.2006.01.065 ↗
5. J.W. Yoon, S.W. Kim, and S.B. Jung, J. Alloys Comp. 385, 192 (2004)10.1016/j.jallcom.2004.05.009 ↗
6. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002)10.1016/S0927-796X(02)00007-4 ↗
7. M.O. Alam, Y.C. Chan, and K.C. Hung, Microelectron. Reliab. 42, 1065 (2002)10.1016/S0026-2714(02)00068-9 ↗
8. C.M. Tsai, W.C. Luo, C.W. Tsai, Y.C. Shieh, and C.R. Kao,J. Electron. Mater. 33, 1424 (2004)10.1007/s11664-004-0082-1 ↗
9. S. Yee, L. Chen, J. Zeng, and R. Joy, J. Surface Mount Technol. 17, 29 (2004)
10. A. Sharif, M.N. Islam, and Y.C. Chan,Mat. Sci. Eng. B 113, 184 (2004)10.1016/S0921-5107(04)00406-4 ↗
11. S.J. Wang and C.Y. Liu, J. Electron. Mater. 32, 130310.1007/s11664-003-0027-0 ↗
12. S.J. Wang and C.Y. Liu, J. Electron. Mater. 35, 1955 (2006)10.1007/s11664-006-0299-2 ↗
13. C.E. Ho, S.C. Yang, and C.R. Kao, J. Mater. Sci.: Mater. Electron. 18, 155 (2007)
14. S. Bader, W.Gust, and H. Hieber, Acta Metall. Mater. 43, 329 (1995)
15. D. Gur and M.Bamberger, Acta Mater. 46, 4917 (1998)10.1016/S1359-6454(98)00192-X ↗
16. J.Y. Tsai, Y.C. Hu, S.M. Tsai, and C.R. Kao,J. Electron. Mater. 32, 1203 (2003)10.1007/s11664-003-0012-7 ↗
17. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996)10.1103/PhysRevB.53.16027 ↗
18. Z.Mei, A.J. Sunwoo, and J.W. Morris, Jr., Metall. Trans. A, 23A, 857 (1992)10.1007/BF02675563 ↗
19. T.B. Massalski and H.Okamoto, Binary Alloy Phase Diagram, 2nd ed. (ASM International, 1990)