Effect of spin coating on the curing rate of epoxy adhesive for the fabrication of a polymer optical waveguide
Source abstract
Abstract
Spin coating is a simple process for rapidly depositing thin, solid polymeric films onto relatively flat substrates. Evaporation occurs during spinning of the relatively volatile species in any solution. The curing behavior of spin-coated polymeric film is influenced by the evaporation of any reactive component. An investigation was carried out on a silicon substrate to study the effects of spin coating on the curing behavior of the epoxy adhesive. The degree of curing for both spin and without spin-coated epoxy adhesive was measured by Fourier-transform infrared spectroscopy (FTIR). A slower curing reaction rate was observed for the spin-coated epoxy adhesive. The composition gradient established by solvent evaporation during spinning is responsible for the slower curing reaction rate of the spin-coated epoxy adhesive. From this study, it is proposed to use solvents that are less volatile and allow a greater part of the thinning behavior to occur without significant changes in the fluid properties during the spinning process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Thin Films · Nanofabrication and Lithography Techniques · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. H.M. Lee, W.Y. Hwang, M.C. Oh, H. Park, T. Zyung, and J.J. Kim, Appl. Phys. Lett. 71, 3779 (1997).10.1063/1.120541 ↗
2. Y.C. Chan, M.A. Uddin, M.O. Alam, and H.P. Chan, J. Electron. Mater. 32, 131 (2003).10.1007/s11664-003-0183-2 ↗
3. J.Y. Zhang, G. Windall, and I.W. Boyd, Appl. Surf. Sci. 186, 568 (2002).10.1016/S0169-4332(01)00641-9 ↗
4. D.P. Birnie, J. Non-Cryst. Solids 218, 174 (1997).10.1016/S0022-3093(97)00141-5 ↗
5. J.G.P. Goossens, S. Rastogi, H.E.H. Meijer, and P.J. Lemstra, Polymer 39, 6577 (1998).10.1016/S0032-3861(97)10069-6 ↗
6. X. Li, Y.C. Han, and L.J. An, Langmuir 18, 5293 (2002).10.1021/la011728b ↗
7. J. Mohan, Organic Spectroscopy: Principles and Applications (New Delhi: Narosa Publishing House, 2000), pp. 60–61.
8. C.A. May, Epoxy Resins (New York: Marcel Dekker Inc., 1998), pp. 603–718.
9. J. Liu, Conductive Adhesives for Electronics Packaging (Isle of Man, British Isles: Electrochemical Publications Ltd., 1998), pp. 99–116.
10. Shimadzu Do Brasil Comércio Ltda., Analysis Guidebook, http://www.shimadzu.com.br/analitica/aplicacoes/FTIR/2_22_1.pdf
11. F. Meyer, G. Sanz, A. Eceiza, and I. Mondragon, Polymer 36, 1407 (1995).10.1016/0032-3861(95)95918-Q ↗
12. L.M. Manske, D.B. Graves, and W.G. Oldham, Appl. Phys. Lett. 56, 2348 (1990).10.1063/1.102913 ↗
13. S.F. Kistler and P.M. Schweizer, eds. Liquid Film Coating: Scientific Principles and Their Technological Implications (London: Chapman & Hall, 1997), pp. 713–717.
14. K.J. Skrobis, D.D. Denton, and A.V. Skrobis, Polym. Eng. Sci. 30, 193 (1990).10.1002/pen.760300309 ↗
15. S.K. Kim, J.Y. Yoo, and H.K. Oh, J. Vac. Sci. Technol. B 20, 2206 (2002).10.1116/1.1513582 ↗
16. D.P. Birnie, J. Mater. Res. 16, 1145 (2001).10.1557/JMR.2001.0158 ↗
17. G.A. Luurtsema (Master’s thesis, University of California, Berkeley, 1997).
18. C.S.B. Ruiz, L.D.B. Machado, J.E. Volponi, and E.S. Pino, Nuclr. Instr. Methods in Phys. Res. Sec. B: Beam Interactions Mater. Atoms 208, 309 (2003).10.1016/S0168-583X(03)01113-3 ↗