journal article·2004-06

Wet-chemical etching of (11 $$\bar 2$$ 0) ZnO films0) ZnO films

J. Zhu, N. W. Emanetoglu, Y. Chen, B. V. Yakshinskiy, Y. Lu

Journal of Electronic Materials· Volume 33· Issue 6
Publisher page

Abstract

This paper describes the optimized process of wet-chemical etching of a ZnO film grown on an r-plane sapphire. Different etchants and solution ratios have been used to achieve controllable etching rate and steep etching profile. With selected etching solutions, the etching profiles of epitaxially grown ZnO films (>1.3 µm) are improved. Using Al instead of photoresist as the mask generates a steeper etching slope. Maximal 1:1 vertical/horizontal ratio (45°) has been achieved. X-ray photoelectron spectroscopy (XPS) and sheet resistance measurements show that this wet-chemical etching process has negligible influence on the modification of the physical and chemical properties of the etched surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. B.S. Panwar, Appl. Phys. Lett. 80, 1832 (2002).10.1063/1.1456264 ↗
2. C.R. Gorla, N.W. Emanetoglu, S. Liang, W.E. Mayo, Y. Lu, M. Wraback, and H. Shen, J. Appl. Phys. 85, 2295 (1999).10.1063/1.369577 ↗
3. S. Liang, H. Sheng, Y. Liu, Z. Huo, Y. Lu, and H. Shen, J. Cryst. Growth 225, 110 (2001).10.1016/S0022-0248(01)00830-2 ↗
4. A.Y. Polyakov, N.B. Smirnov, E.A. Kozhukhova, V.I. Vdovin, K. Ip, Y.W. Heo, D.P. Norton, and S.J. Pearton, Appl. Phys. Lett. 83, 1575 (2003).10.1063/1.1604173 ↗
5. H. Sheng, S. Muthukumar, N.W. Emanetoglu, and Y. Lu, Appl. Phys. Lett. 80, 2132 (2002).10.1063/1.1463700 ↗
6. D.P. Norton, S.J. Pearton, A.F. Hebard, N. Theodoropoulou, L.A. Boatner, and R.G. Wilson, Appl. Phys. Lett. 82, 239 (2003).10.1063/1.1537457 ↗
7. Y. Ito, K. Kushida, K. Sugawara, and H. Takeuchi, IEEE Trans. Ferroelectr. Frequency Control 42, 316 (1995).10.1109/58.365245 ↗
8. O. Kluth, A. Loeffl, S. Wieder, and C. Beneking, Photovoltaic Specialists Conf. (New York: IEEE, 1997), pp. 715–718.
9. F.S. Hickemell and T.S. Hickemell, Ultrasonics Symp. (New York: IEEE, 1992), pp. 373–376.
10. K.C. Lou, X. Zhu, H. Lakdawala, and E.S. Kim, Ultrasonics Symp. (Piscataway, NJ: IEEE, 1997), pp. 565–568.
11. H. Maki, T. Ikoma, and I. Sakaguchi, Thin Solid Films 411, 91, (2002).10.1016/S0040-6090(02)00194-3 ↗
12. S.C. Chang, D.B. Hicks, and R.C.O. Laugal, Solid-State Sensor Actuator Workshop (New York: IEEE, 1992), pp. 41–45.10.1109/SOLSEN.1992.228280 ↗
13. S. Liang, C.R. Gorla, N. Emanetoglu, Y. Liu, W.E. Mayo, and Y. Lu, J. Electron. Mater. 27, 11 (1998).10.1007/s11664-998-0083-6 ↗
14. R.C. Weast, Handbook of Chemistry and Physics, 57th ed. (Boca Raton, FL: CRC Press, Inc., 1976), pp. D151.
15. S.S. Tan, M. Ye, and A.G. Milnes, Solid-State Electron. 38, 17 (1995).10.1016/0038-1101(94)E0072-M ↗