A dynamic model for the assessment of the replacement of lead in solders
Source abstract
Abstract
A dynamic, interactive map has been developed of the life cycle of a number of metals, from mining through to minerals processing, metal production, product manufacturing, recovery, and waste management. While the existing metal process network and waste management infrastructure provide substantial scope for (product) design, these also limit change because of the strong path dependency of industry and infrastructure development. Therefore, models for dynamic simulation were constructed that allow the specification and evaluation of the metal process network and waste management infrastructure “products” over a longer time span. The model has been constructed using a bottom-up approach, to enable assessment of the environmental aspects of metallurgy, and to simulate changes in the system structure and technology, i.e., from the reactor or individual process step up to integrated material cycles. This dynamic interconnected model is used to investigate the impact of the removal of lead from solders on the coupled flows of the metals Ag, Au, Bi, Cu, Fe, Ni, Pb, Sn, Zn, and PGMs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Recycling and Waste Management Techniques · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Ullmann’s Encyclopedia of Technical Chemistry, 6th ed., no 24 (Weinheim, Germany, 2000).
2. P. Baccini and P.H. Brunner, Metabolism of the Anthroposphere (Berlin: Springer, 1991), pp. 1–40.10.1007/978-3-662-02693-9_1 ↗
3. P. Baccini and H.P. Bader, Regionaler Stoffhaushalt. Erfassung Bewertung und Steuerung. (Heidelberg: Spektrum, 1996), pp. 35–55.
4. H.A. De Haes and E. Van der Voet, in The Global Environment: Science, Technology and Management, eds. D. Brune, D.V. Chapman, M.D. Gwynne, and J.M. Pacyna (Weinheim, Germany: Scandinavian Science Publisher, VCH, 1997).
5. Mathworks Inc. Simulink™ 4 (release 12) and Mathlab 6 (release 12) (Natick, MA: The Mathworks, Inc., 2000).
6. V. Veverka and F. Madron, Material and Energy Balancing in the Process Industries (Amsterdam: Elsevier, 1997).
7. M.A. Reuter, Miner. Eng. 11, 891 (1998).10.1016/S0892-6875(98)00078-8 ↗
8. E.V. Verhoef, M.A. Reuter, and A. Scholte, Principles Technol. 2, 605 (2002).
9. E.V. Verhoef, G.P.J. Dijkema, and M.A. Reuter, J. Ind. Ecol. 8 1–2, 23 (2004).10.1162/1088198041269382 ↗
10. E.G. Hertwich, W.S. Paese, and C.P. Koshland, Sci. Total Env. 196, 13 (1997).10.1016/S0048-9697(96)05344-2 ↗
11. D.W. Pennington, G. Norris, T. Hoagland, and J.C. Bare, Environ. Progr. 19, 83 (2000).10.1002/ep.670190206 ↗
12. E.G. Hertwich and J.K. Hammit, Int. J. Life Cycle Assoc. 6, 265 (2001).10.1007/BF02978787 ↗
13. W. Smidt and J. Sullivan, Int. J. Life Cycle Assoc. 7, 5 (2002).10.1007/BF02978904 ↗
14. M. Goedkoop and R. Spriensma, The Eco-Indicator 99, A Damage Oriented Method for Life Cycle Impact Assessment: Methodology Report, 2nd ed. (Amersfoort: Pré Consultants, 2000).
15. T. Ekvall and G. Finnveden, J. Clean Prod. 9, 403 (2001).10.1016/S0959-6526(00)00052-4 ↗
16. A. Azapagic (Ph.D. Dissertation, University of Surrey, 1996), as quoted in Ref. 17.
17. A. Azapagic and R. Clift, J. Clean Prod. 7, 1010 (1999).10.1016/S0959-6526(98)00051-1 ↗
18. Offic. J. Eur. Commun. C365 E/13, 195 (2000).10.1023/A:1009220311261 ↗
19. M. Abtew and G. Selvaduray, Mater. Sci. Eng. 27, 95, 2000.10.1016/S0927-796X(00)00010-3 ↗
20. A.Z. Miric and W.C. Hereaus, Proc. Electronics Goes Green (Berlin: 2000), p. 31.
21. M. Harrison, J. Vincent, and M. Warwick, “Improved Design Life and Environmentally Aware Manufacturing of Electronics Assemblies by Lead-Free Soldering: ‘IDEALS’.” (Caswell, Towcester, UK, Marconi Materials Technology). Synthesis Report for Publication (Project No. BE95-1994, 1999).
22. P.F. Chapman and F. Roberts, Metal Resources and Energy (London, UK, Butterworths Monographs in Materials, 1983).10.1016/B978-0-408-10801-0.50007-9 ↗
23. C.K. Fishbein, Waste in the Wireless World: The Challenge of Cell Phones (New York: Inform Inc., 2002) www.informinc.org.
24. O. Deubzer, H. Griese, and T. Suga, Proc. EcoDesign 2001, 2nd Int. Symp. on Environmentally Consicious Design and Inverse Manufacturing (Los Alamitos, CA, IEEE) (Tokyo: 2001), p. 952.
25. T. Hamano, T. Suga, and H. Griese, IEEE Int. Symp. on Electronics and the Environment (Piscataway, NJ: IEEE, 2001), p. 290.
26. L.J. Turbini, G.C. Munie, D. Bernier, J. Gamalski, and D.W. Bergman, Proc. Electronics Goes Green (Stuttgart, Germany, IRB-Verlag), (Berlin: 2000), p. 37.
27. O. Deubzer, T. Suga, and H. Griese, Proc. Electronics Goes Green (Stuttgart, Germany, IRB-Verlag), (Berlin: 2000), p. 51.
28. L.J. Turbini, G.C. Munie, D. Bernier, J. Gamalski, and D.W. Bergamn, Proc. IEEE Int. Symp. on Electronics and the Environment (Piscataway, NJ: IEEE, 2001), p. 46.
29. USGS Principles of a Resource/Reserve Classification for Minerals U.S. (Geological Survey and the U.S. Bureau of Mines U.S. Geological Survey Circular 83, 1980), minerals.usgs.go
30. J. Benzler, H. Dauner, B. Diegner, M. Kaiser, F. Kaspar, R. Luchs, and P. Peetz, in Zentralverband Elektrotechnikund Elektronikindustrie (ZVEI) Series of Publications of Pro-Technik Manuals for Electrical Industrial Production 1999–2000 (ZVEI 2000, Original Version in German 1999).
31. U. Kindesjö (Master’s Thesis, Lund, Sweden, 2002).