journal article·2003-11

Electromigration study in SnAg3.8Cu0.7 solder joints on Ti/Cr-Cu/Cu under-bump metallization

Ying-Chao Hsu, Tung-Liang Shao, Ching-Jung Yang, Chih Chen

Journal of Electronic Materials· Volume 32· Issue 11
Publisher page

Abstract

This paper investigates the electromigration-induced failures of SnAg3.8Cu0.7 flip-chip solder joints. An under-bump metallization (UBM) of a Ti/Cr-Cu/Cu trilayer was deposited on the chip side, and a Cu/Ni(P)/Au pad was deposited on the BT board side. Electromigration damages were observed in the bumps under a current density of 2×104 A/cm2 and 1×104 A/cm2 at 100°C and 150°C. The failures were found to be at the cathode/chip side, and the current crowding effect played an important role in the failures. Copper atoms were found to move in the direction of the electron flow to form intermetallic compounds (IMCs) at the interface of solder and pad metallization as a result of current stressing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. K.N. Tu, J.W. Mayer, and L.C. Feldman, Electronic Thin Film Science (New York: Macmillan Publishing Company, 1992), p. 355.
2. J.H. Lau and S.-W.R. Lee, Chip Scale Package (New York: McGraw-Hill, 1999), p. 3.
3. H. Gan, W.J. Choi, G. Xu, and K.N. Tu, JOM 6, 34 (2002).10.1007/BF02701847 ↗
4. C.Y. Liu, C. Chen, and K.N. Tu, J. Appl. Phys. 88, 5703 (2000).10.1063/1.1319327 ↗
5. T.Y. Lee and K.N. Tu, J. Appl. Phys. 89, 3189 (2001).10.1063/1.1342023 ↗
6. K. Nakagawa, S. Baba, M. Watanabe, H. Matsushima, K. Harada, E. Hayashi, Q. Wu, A. Maeda, M. Nakanishi, and N. Ueda, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2001), pp. 917–977.
7. J.D. Wu, P.J. Zheng, K. Lee, C.T. Chiu, and J.J. Lee, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2002), pp. 452–457.
8. S.W. Chen, C.M. Chen, and W.C. Liu, J. Electron. Mater. 27, 1193 (1998).10.1007/s11664-998-0068-5 ↗
9. C.M. Chen and S.W. Chen, J. Electron. Mater. 28, 902 (1999).10.1007/s11664-999-0217-5 ↗
10. C.M. Chen and S.W. Chen, J. Electron. Mater. 29, 1222 (2000).10.1007/s11664-000-0016-5 ↗
11. C.M. Chen and S.W. Chen, J. Appl. Phys. 90, 1208 (2001).10.1063/1.1380219 ↗
12. S.Y. Jang, J. Wolf, W.S. Kwon, and K.W. Paik, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2002), pp. 1213–1220.
13. T.Y. Lee and K.N. Tu, J. Appl. Phys. 90, 4502 (2001).10.1063/1.1400096 ↗
14. H. Gan and K.N. Tu, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2002), pp. 1206–1212.
15. K.N. Tu, C.C. Yeh, C.Y. Liu, and C. Chen, Appl. Phys. Lett. 76, 988 (2000).10.1063/1.125915 ↗
16. T.Y.T. Lee, T.Y. Lee, and K.N. Tu, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2001), pp. 558–563.
17. E.C.C. Yeh and K.N. Tu, J. Appl. Phys. 89, 3203 (2001).10.1063/1.1348324 ↗
18. E.C.C. Yeh, W.J. Choi, and K.N. Tu, Appl. Phys. Lett. 80, 580 (2002).10.1063/1.1432443 ↗
19. W.J. Choi, E.C.C. Yeh, and K.N. Tu, ECTC, Electron. Comp. Technol. Conf. (Piscataway, NJ: IEEE, 2002), pp. 1201–1205.