journal article·2004-10

Mechanism of interfacial reaction for the Sn-Pb solder bump with Ni/Cu under-bump metallization in flip-chip technology

Guh-Yaw Jang, Chien-Sheng Huang, Li-Yin Hsiao, Jenq-Gong Duh, Hideyuki Takahashi

Journal of Electronic Materials· Volume 33· Issue 10
Publisher page

Abstract

Nickel-based under-bump metallization (UBM) has been widely used in flip-chip technology (FCT) because of its slow reaction rate with Sn. In this study, solder joints after reflows were employed to investigate the mechanism of interfacial reaction between the Ni/Cu UBM and eutectic Sn-Pb solder. After deliberate quantitative analysis with an electron probe microanalyzer (EPMA), the effect of Cu content in solders near the interface of the solder/intermetallic compound (IMC) on the interfacial reaction could be probed. After one reflow, only one layered (Ni1−x,Cux)3Sn4 with homogeneous composition was found between the solder bump and UBM. However, after multiple reflows, another type of IMC, (Cu1−y,Niy)6Sn5, formed between the solder and (Ni1−x,Cux)3Sn4. It was observed that if the concentration of Cu in the solders near the solder/IMC interface was higher than 0.6 wt.%, the (Ni1−x,Cux)3Sn4 IMC would transform into the (Cu1−y,Niy)6Sn5 IMC. The Cu contents in (Ni1−x,Cux)3Sn4 were altered and not uniformly distributed anymore. With the aid of microstructure evolution, quantitative analysis, elemental distribution by x-ray color mapping, and related phase equilibrium of Sn-Ni-Cu, the reaction mechanism of interfacial phase transformation between the Sn-Pb solder and Ni/Cu UBM was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. J.H. Lau, Flip Chip Technologies (New York: McGraw-Hill, 1996), pp. 26–30.
2. D.S. Patterson, P. Eleniu, and J.A. Leal, Adv. Electron. Packaging 1, 337 (1997).
3. C.S. Chang, A. Oscilowski, and R.C. Bracken, IEEE Circuits Dev. Mag. 14, 45 (1998).10.1109/101.666591 ↗
4. A.A. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, J. Appl. Phys. 80, 2774 (1996).10.1063/1.363728 ↗
5. H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 68, 2204 (1996).10.1063/1.116013 ↗
6. K.L. Lin and Y. C. Liu, 49th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 607–612.
7. B.L. Young and J.G. Duh, J. Electron. Mater. 30, 878 (2001).10.1007/s11664-001-0075-2 ↗
8. C.S. Huang, J.H. Yeh, B.L. Young, and J.G. Duh, J. Electron. Mater. 31, 1230 (2002).10.1007/s11664-002-0014-x ↗
9. S.K. Kang, R.S. Rai, and S. Purrshothaman, J. Electron. Mater. 25, 1113 (1996).10.1007/BF02659912 ↗
10. J.W. Nah, and K.W. Paik, IEEE Trans. Comp. Packaging Technol. 25, 32 (2002).10.1109/6144.991172 ↗
11. C.S. Huang, J.G. Duh, Y.M. Chen, and J.H. Wang, J. Electron. Mater. 32, 89 (2003).10.1007/s11664-003-0241-9 ↗
12. C.S. Huang and J.G. Duh, J. Mater. Res. 18, 935 (2003).10.1557/JMR.2003.0128 ↗
13. J.I. Goldstein, Scanning Electron Microscopy and X-ray Microanalysis (New York: Plenum Press, 1992), pp. 306–330.10.1007/978-1-4613-0491-3 ↗
14. C.H. Lin, S.W. Chen, and C.H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
15. W.T. Chen, C.E. Ho, and C.R. Kao, J. Mater. Res. 17, 263 (2002).10.1557/JMR.2002.0036 ↗
16. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., Binary Alloy Phase Diagrams (Materials Park, OH: ASM International, 1990), pp. 1442–1446.
17. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., Binary Alloy Phase Diagrams (Materials Park, OH: ASM International, 1990), pp. 2863–2864.
18. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., Binary Alloy Phase Diagrams (Materials Park, OH: ASM International, 1990), pp. 1481–1483.
19. Y.C. Hsu and J.G. Duh, J. Electron Mater., in press.
20. C.H. Lin, S.W. Chen, and C.H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
21. K.N. Tu and K. Zeng, Mater. Sci. Eng. R 34, 1 (2001).10.1016/S0927-796X(01)00029-8 ↗
22. M. Li, F. Zhang, W.T. Chen, K. Zeng, K.N. Tu, H. Balkan, and P. Elenius, J. Mater. Res. 17, 1612 (2002).10.1557/JMR.2002.0239 ↗
23. K. Zeng, V. Vuorinen, and J.K. Kivilahti, IEEE Trans. Electron. Packaging 25, 162 (2002).10.1109/TEPM.2002.801648 ↗
24. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗