journal article·2000-07

Room temperature wafer bonding of silicon, oxidized silicon, and crystalline quartz

Stefan Bengtsson, Petra Amirfeiz

Journal of Electronic Materials· Volume 29· Issue 7
Publisher page

Abstract

The use of plasma immersion as preparation for room temperature wafer bonding has been investigated. Silicon wafers have been successfully bonded at room temperature after exposure to oxygen or argon plasma. Oxidized silicon wafers and crystalline quartz have been bonded after exposure to oxygen plasma. The bonded interfaces exhibit very high surface energies, comparable to what can be achieved with annealing steps in the range of 600–800°C using normal wet chemical activation before bonding. The high mechanical stability obtained after bonding at room temperature is explained by an increased dynamic in water removal from the bonded interface allowing covalent bonds to be formed. Electrical measurements were used to investigate the usefulness of plasma bonded interfaces for electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. J.B. Lasky, Appl. Phys. Lett. 48, 78 (1986).10.1063/1.96768 ↗
2. S. Bengtsson, J. Electron. Mater. 21, 841 (1992).
3. R. Stengl, T. Tan, and U. Gösele, Jpn. J. Appl. Phys. 28, 1735 (1989).10.1143/JJAP.28.1735 ↗
4. S.N. Farrens, J.R. Dekker, J.K. Smith, and B.E. Roberds, J. Electrochem. Soc. 142, 3949 (1995).10.1149/1.2048440 ↗
5. S.N. Farrens, Semiconductor Wafer Bonding IV, ed. U. Gösele, H. Baumgart, T. Abe, C. Hunt, and S. Iyer (Pennington, NJ: Electrochem. Soc., 1997), p. 425.
6. M. Reiche, K. Gutjahr, D. Stolze, D. Burczyk, and M. Petzold, Semiconductor Wafer Bonding IV, ed. U. Gösele, H. Baumgart, T. Abe, C. Hunt, and S. Iyer (Pennington, NJ: Electrochem. Soc., 1997), p. 437.
7. S. Farrens and J. Smith, Semiconductor Wafer Bonding III, ed. C. Hunt, H. Baumgart, S.S. Iyer, T. Abe, and U. Gösele (Pennington, NJ: Electrochem. Soc., 1995), p. 72.
8. O. Zucker, W. Langheinrich, M. Kulozik, and H. Goebel, Sensors and Actuators A36, 227 (1993).10.1016/0924-4247(93)80197-O ↗
9. B.E. Roberds and S.N Farrens, Semiconductor Wafer Bonding IV, ed. U. Gösele, H. Baumgart, T. Abe, C. Hunt, and S. Iyer (Pennington, NJ: Electrochem. Soc., 1997), p. 598.
10. P. Amirfeiz, S. Bengtsson, M. Bergh, E. Zanghellini, and B.L. Börjesson, Proc. Electrochem. Soc. (to be published).
11. W.P Maszara, G. Goetz, A. Caviglia, and J.B. McKitterick, J. Appl. Phys. 64, 4943 (1988).10.1063/1.342443 ↗
12. B.E. Deal and A.S. Grove, J. Appl. Phys. 36, 3770 (1965).10.1063/1.1713945 ↗
13. W.-S. Liao and S.-C. Lee, J. Appl. Phys. 80, 1171 (1996).10.1063/1.362915 ↗
14. U. Gösele, H. Stenzel, T. Martini, J. Steinkirchner, D. Conrad, and K. Scheerschmidt, Appl. Phys. Lett. 67, 3614 (1995).10.1063/1.115335 ↗
15. H. Takagi, K. Kikuchi, R. Maeda, T.R. Chung, and T. Suga, Appl. Phys. Lett. 68, 2222 (1996).10.1063/1.115865 ↗
16. S. Bengtsson and O. Engström, J. Appl. Phys. 66, 1231 (1989).10.1063/1.343469 ↗
17. S. Bengtsson, G.I. Andersson, M.O. Andersson, and O. Engström, J. Appl. Phys. 72, 124 (1992).10.1063/1.352172 ↗