journal article·2005-12

Intermetallic compound formation and morphology evolution in the 95Pb5Sn flip-chip solder joint with Ti/Cu/Ni under bump metallization during reflow soldering

Kai-Zheng Wang, Chih-Ming Chen

Journal of Electronic Materials· Volume 34· Issue 12
Publisher page

Abstract

Intermetallic compound formation and morphology evolution in the 95Pb5Sn flip-chip solder joint with the Ti/Cu/Ni under bump metallization (UBM) during 350°C reflow for durations ranging from 50 sec to 1440 min were investigated. A thin intermetallic layer of only 0.4 µm thickness was formed at the 95Pb5Sn/UBM interface after reflow for 5 min. When the reflow was extended to 20 min, the intermetallic layer grew thicker and the phase identification revealed the intermetallic layer comprised two phases, (Ni,Cu)3Sn2 and (Ni,Cu)3Sn4. The detection of the Cu content in the intermetallic compounds indicated that the Cu atoms had diffused through the Ni layer and took part in the intermetallic compound formation. With increasing reflow time, the (Ni,Cu)3Sn4 phase grew at a faster rate than that of the (Ni,Cu)3Sn2 phase. Meanwhile, irregular growth of the (Ni,Cu)3Sn4 phase was observed and voids formed at the (Ni,Cu)3Sn2/Ni interface. After reflow for 60 min, the (Ni,Cu)3Sn2 phase disappeared and the (Ni,Cu)3Sn4 phase spalled off the NI layer in the form of a continuous layer. The gap between the (Ni,Cu)3Sn4 layer and the Ni layer was filled with lead. A possible mechanism for the growth, disappearance, and spalling of the intermetallic compounds at the 95Pb5Sn/UBM interface was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. P.A. Totta and R.P. Sopher, IBM J. Res. Dev. 13, 226 (1969).10.1147/rd.133.0226 ↗
2. L.F. Miller, IBM J. Res. Dev. 13, 239 (1969).10.1147/rd.133.0239 ↗
3. J.H. Lau, Flip Chip Technologies (New York: McGraw-Hill, 1996), p. 123.
4. K.N. Tu and K. Zeng, Mater. Sci. Eng. R34, 1 (2001).
5. K.N. Tu, A.M. Gusak, and M. Li, J. Appl. Phys. 93, 1335 (2003).10.1063/1.1517165 ↗
6. R. Shukla, V. Murali, and A. Bhansali, Proc. 1999 Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 945–949.
7. V.K. Nagesh, R. Peddada, S. Ramalingam, B. Sur, and A. Tai, Proc. 1999 Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1999), p. 975–978.
8. B.S. Berry and I. Ames, IBM J. Res. Dev. 13, 286 (1969).10.1147/rd.133.0286 ↗
9. G.Z. Pan, A.A. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 71, 2946 (1997).10.1063/1.120224 ↗
10. Y.H. Liu, C.M. Chuang, and K.L. Lin, J. Mater. Res. 19, 2471 (2004).10.1557/JMR.2004.0310 ↗
11. J.W. Jang, L.N. Ramanathan, J.K. Lin, and D.R. Frear, J. Appl. Phys. 95, 8286 (2004).10.1063/1.1739530 ↗
12. M. Inaba, K. Yamakawa, and N. Iwase, IEEE Trans. Comp. Hyb. Manufacturing Technol. 13, 119 (1990).10.1109/33.52858 ↗
13. K.L. Lin and J.M. Jang, Mater. Chem. Phys. 38, 33 (1994).10.1016/0254-0584(94)90142-2 ↗
14. Binary Alloy Phase Diagrams, ed. T.B. Massalski (Materials Park, OH: ASM International, 1990).
15. S. Bader, W. Gust, and H. Hieber, Acta Metall. Mater. 43, 329 (1995).
16. J.A. van Beek, S.A. Stolk, and F.J.J. van Loo, Z. Metallkd. 73, 439 (1982).
17. A.A. Liu, H.K. Kim, and K.N. Tu, J. Appl. Phys. 80, 2774 (1996).10.1063/1.363728 ↗
18. H.P.R. Frederikse, R.J. Fields, and A. Feldman, J. Appl. Phys. 72, 2879 (1992).10.1063/1.351487 ↗
19. L. Wang, Q. Wang, A. Xian, and K. Lu, J. Phys.: Condens. Matter 15, 777 (2003).