Analysis of the redeposition of AuSn4 on Ni/Au contact pads when using SnPbAg, SnAg, and SnAgCu solders
Source abstract
Abstract
Interfacial reactions between SnPbAg, SnAg, and SnAgCu solders and Ni/Au surface finish on printed wiring board and especially the redeposition of AuSn4 intermetallic compound have been investigated. The following major results were obtained. The first phase to form during soldering in the (SnPbAg)/Ni/Au and the (SnAg)/Ni/Au systems was Ni3Sn4. During the subsequent solid-state annealing, the redeposition of AuSn4 as (Au,Ni)Sn4 occurred in both systems. This was explained with the help of the concept of local equilibrium and the corresponding ternary phase diagrams. It was concluded that the stabilizing effect of Ni on the (Au,Ni)Sn4 provided the driving force for the redeposition. Contrarily, when the solder alloy contained some Cu, the first intermetallic to form was (Cu,Ni,Au)6Sn5 and no redeposition of AuSn4 was observed. Thus, a very small addition of Cu to the Sn-rich solder alloys changed the behavior of the interconnection system completely. This behavior was explained thermodynamically by using Cu-Ni-Sn and Au-Cu-Sn ternary phase diagrams. The growth kinetics of the interfacial reaction products in the three systems was observed to be somewhat different. The reasons for the observed differences are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Z. Mei, A. Eslambochi, and P. Johnsson, Proc. 48th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1998), p. 952.
2. A. Minor and J. Morris, Metall. Mater. Trans. A 31A, 798 (2000).10.1007/s11661-000-0022-5 ↗
3. C. Ho, L. Shiau, and C. Kao, J. Electr. Mater. 31, 1264 (2002).10.1007/s11664-002-0019-5 ↗
4. L. Shiau, C. Ho, and C. Kao, Soldering Surf. Mount Technol. 14, 25 (2002).10.1108/09540910210444692 ↗
5. J. Glazer, J. Electron. Mater. 23, 693 (1994).10.1007/BF02651361 ↗
6. Thermodynamic Databank for Interconnection and Packaging Materials (IPMA) (Helsinki: Laboratory of Electronics Production Technology, 2004).
7. M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations: Their Thermodynamic Basis (Cambridge, MA: Cambridge University Press, 1998), pp. 93–108.
8. J.K. Kivilahti, J. Met. 54, 52 (2002).
9. K. Zeng and J.K. Kivilahti, J. Electron. Mater. 30, 35 (2001).10.1007/s11664-001-0212-y ↗
10. V. Vuorinen and J.K. Kivilahti, to be published (2004).
11. K. Zeng and K.N. Tu, Mater. Sci. Eng. R R38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
12. A. Guy and J. Hern, Elements of Physical Metallurgy (Reading, MA: Addison-Wesley, 1974), p. 278.
13. S. Anhock, H. Oppermann, C. Kallmayer, R. Aschenbrenner, L. Thoman, and H. Reichel, 22nd IEEE/CPMT Int. Electronics Manufacturing Technology Symp. (New York: IEEE, 1998), pp. 156–165.
14. L. Zavalij, A. Zribi, R. Chromik, S. Pitely, P. Zavalij, and E. Cotts, J. Alloys Compounds 334, 79 (2002).10.1016/S0925-8388(01)01780-7 ↗
15. J. Roeder (Doctoral Dissertation, Lehigh University, 1988), p. 138.
16. L. Buene, H. Falkenberg-Arell, J. Gjonnes, and J. Tafto, Thin Solid Films 67, 95 (1980).10.1016/0040-6090(80)90292-8 ↗
17. B. Dyson, J. Appl. Phys. 37, 482 (1966).
18. C. Kidson, Phil. Mag. 13, 247 (1966).10.1080/14786436608212604 ↗