journal article·2008-01

Additive Effect of Kirkendall Void Formation in Sn-3.5Ag Solder Joints on Common Substrates

Feng Gao, Hiroshi Nishikawa, Tadashi Takemoto

Journal of Electronic Materials· Volume 37· Issue 1
Publisher page

Abstract

The Sn-3.5Ag and Sn-3.5Ag-0.2Co-0.1Ni lead-free solders were investigated on common electronics substrates, namely, organic solderability preservative (OSP) and electroless Ni/immersion Au (ENIG) surface finishes. The formation of Kirkendall voids at the interfacial region during isothermal solid aging was explored. For the Sn-3.5Ag-0.2Co-0.1Ni/OSP solder joint, the Kirkendall voids were present after isothermal solid-state aging at higher temperature (e.g., 150°C); however, the size of voids did not change remarkably with prolonged aging time due to the depressed Cu 3 Sn layer growth. For ENIG surface finishes, the 0.2Co-0.1Ni additions seemed to enhance the longitudinal groove-shaped voids at the Ni 3 P layer; however, void formation at the solder/Ni 3 Sn 4 interface was effectively reduced. This might be attributed to the reduced Sn activity in the solder matrix and the suppressed Ni-P-Sn layer formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. H. Gan, K.N. Tu, J. Appl. Phys. 97, 063514 (2005)10.1063/1.1861151 ↗
2. M. Ding, G.T. Wang, B. Chao, P.S. Ho, P. Su, T. Uehling, J. Appl. Phys. 99, 094906 (2006)10.1063/1.2193037 ↗
3. K.J. Zeng, R. Stierman, T.-C. Chiu, D. Edwards, K. Ano, K.N. Tu, J. Appl. Phys. 97, 024508 (2005)10.1063/1.1839637 ↗
4. M. Date, T. Shoji, M. Fujiyoshi, K. Sato, K.N. Tu, Proc. Electronic Component Technology Conf. (Las Vegas, USA, 2004), pp. 668–674
5. Z.Q. Mei, M. Ahmad, M. Hu, G. Ramakrishna, Proc. Electronic Component Technology Conf. (Lake Buena Vista, USA, 2005), pp. 415–420
6. P.L. Liu, J.K. Shang, Scripta Mater., 53, 631 (2005)10.1016/j.scriptamat.2005.05.033 ↗
7. H. Yu, V. Vuorinen, J. Kivilhti, Proc. Electronic Component Technology Conf. (San Diego, USA, 2006), pp. 1204–1209
8. F. Gao, T. Takemoto, H. Nishikawa, A. Komatsu, J. Electron. Mater. 5, 905 (2006)10.1007/BF02692546 ↗
9. K.N. Tu, K. Zeng, Mater. Sci. Eng. R. 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
10. L.H. Xu, J.H.L. Pang, Proc. Electronic Component Technology Conf. (San Diego, USA, 2006), pp. 275–282
11. P. Sun, C. Andersson, X.C. Wei, Z.N. Cheng, D.K. Shangguan, J.H. Liu, J. Alloys Compd. 425, 191 (2006)10.1016/j.jallcom.2006.01.080 ↗
12. Z. Chen, M. He, G. Qi, J. Electron. Mater. 33, 1465 (2004)10.1007/s11664-004-0088-8 ↗
13. M. He, Z. Chen, G. Qi, Acta Mater. 52, 2047 (2004)10.1016/j.actamat.2003.12.042 ↗
14. X.Y. Ding, P. Fan, W.Z. Wang, Metall. Mater. Trans. 30 B, 271 (1999)10.1007/s11663-999-0056-z ↗