journal article·2001-12

Optimization of tribological properties of silicon dioxide during the chemical mechanical planarization process

A. K. Sikder, Frank Giglio, John Wood, Ashok Kumar, Mark Anthony

Journal of Electronic Materials· Volume 30· Issue 12
Publisher page

Abstract

Chemical mechanical planarization (CMP) has been proved to achieve excellent global and local planarity, and, as feature sizes shrink, the use of CMP will be critical for planarizing multilevel structures. Understanding the tribological properties of a dielectric layer in the CMP process is critical for successful evaluation and implementation of the materials. In this paper, we present the tribological properties of silicon dioxide during the CMP process. A CMP tester was used to study the fundamental aspects of the CMP process. the accessories of the CMP tester were first optimized for the reproducibility of the results. The coefficient of friction (COF) was measured during the process and was found to decrease with both down pressure and platen rotation. An acoustic sensor attached to this tester is used to detect endpoint, delamination, and uniformity. The effects of machine parameters on the polishing performance and the correlation of physical phenomena with the process have been discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. J.M. Steigerwald, S.P. Murarka, and R.J. Gutmann, Chemical Mechanical Planarization of Microelectronics Materials, (New York: John Wiley & Sons Inc., 1997).10.1002/9783527617746 ↗
2. C.-H. Yao, D.L. Feke, K.M. Robinson, and S. Meikle, J. Electrochem. Soc. 147, 3094 (2000).10.1149/1.1393862 ↗
3. C. Oji, B. Lee, D. Ouma, T. Smith, J. Yoon, J. Chung and D. Boning, J. Electrochem. Soc. 147, 4307 (2000).10.1149/1.1394060 ↗
4. J. Zabasajja, T. Merchant, B. Ng, S. Banerjee, D. Green, S. Lawing, and H. Kura, J. Electrochem. Soc. 148, G73 (2001).10.1149/1.1341246 ↗
5. C.-F. Lin, W.-T. Tseng, and M.S. Feng, J. Electrochem. Soc. 146, 1984 (1999).10.1149/1.1391877 ↗
6. Alexander E. Braun, Semicond. Int., 21, 65 (1998).
7. Timothy Marbeiter, Timothy Cleary, and Karen Sutter, Semicond. Int., 21, 76 (1998).
8. M. Bhushan, R. Rouse, and J.E. Lukens, J. Electrochem. Soc. 142, 3845 (1995).10.1149/1.2048422 ↗
9. R. Jairath, J. Farkas, C.K. Huang, M. Stell, and T. Sing. Mo, Solid State Technol., p. 71 (1994).
10. R. DeJule, Semicond. Int., 20, 54 (1997).
11. S.R. Runnels and L.M. Eyman, J. Electrochem. Soc. 141, 1900 (1994).10.1149/1.2055024 ↗
12. James Reynolds, A.L. Swecker, Andrzej J. Strojwas, Ady Levy, and Bobby Bell, Solid State Technol., p. 39 (1998).
13. S. Runnels, J. Electron. Mater. 25, 1574 (1996).10.1007/BF02655578 ↗
14. D.P. Thakurta, C.L. Borst, D.W. Schwendman, R.J. Gutman, and W.N. Grill, Thin Solid Films 336, 181 (2000).10.1016/S0040-6090(00)00748-3 ↗
15. A.K. Sikder, I.M. Irfan, Ashok Kumar, A. Belyaev, S. Ostapenko, M. Calves, J.P. Harmon, and J.M. Anthony: MRS Spring Meeting, San Francisco, Mat. Res. Symp. Proc., 671 (2001).
16. P. Wrschka, J. Hernandez, G.S. Oehrlein, and J. King, J. Electrochem. Soc. 147, 706 (2000).10.1149/1.1393256 ↗
17. T. Park, T. Tugbawa, and D. Boning, Proc. CMP-MIC, Santa Clara (2000), p. 196.
18. Y. Morand, Microelectr. Eng. 50, 391 (2000).10.1016/S0167-9317(99)00307-X ↗