Developing a lead-free solder alloy Sn-Bi-Ag-Cu by mechanical alloying
Source abstract
Abstract
A new lead free alloy, Sn-6Bi-2Ag-0.5Cu, has been developed by mechanical alloying and has great potential as a lead-free solder system. Initial trials on the manufacture of solder joints with this alloy revealed that a high quality bond with copper could be formed. Its melting range of 193.87°C to 209.88°C is slightly higher than that of eutectic tin-lead solder. Examination of the microstructure of the as-soldered joints revealed that it mainly consists of small bismuth (1 µm to 2 µm) and Ag3Sn (1 µm) particles finely dispersed in a nearly pure tin matrix with a small amount of η-Cu6Sn5 particles. The Cu-Sn intermetallic compound (IMC) layer formed at solder-copper interface is the η-Cu6Sn5 phase with grain size of 2 µm. The shear strength of the solder joint is higher than that of Sn-37Pb or Sn-3.5Ag. Under shear loading, fracture occurred at IMC layer-solder interface as well as in the bulk of solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. J. Glazer, Int. Mater. Rev. 40, 65 (1995).10.1179/095066095790151115 ↗
2. D.M. Jacobson and M.R. Harrison, The GEC J. Technol. 14, 98 (1997).
3. J.H. Vincent and G. Humpston, GEC J. Res. 11, 76 (1994).
4. D.M. Jacobson and G. Humpston, GEC J. Res. 12, 112 (1995).
5. J.L. Freer and J.W. Morris, Jr., J. Electron. Mater. 21, 647 (1992).10.1007/BF02655434 ↗
6. Z. Mei and J.W. Morris, Jr., J. Electron. Mater. 21, 599 (1992).10.1007/BF02655427 ↗
7. C.H. Raeder, L.E. Felton, V.A. Tanzi, and D.B. Knoor, J. Electron. Mater. 23, 611 (1994).10.1007/BF02653346 ↗
8. S.W. Yoon, J.R. Soh, H.M. Lee, and B.J. Lee, Acta Mater. 45, 951 (1997).10.1016/S1359-6454(96)00253-4 ↗
9. V.I. Igosher, J.I. Kleiman, D. Shangguan, C. Lock, S. Wang, and M. Wiseman, J. Electron. Mater. 27, 1367 (1998).10.1007/s11664-998-0099-y ↗
10. W. Yang, R.W. Messler, Jr., and L.E. Felton, J. Electron. Mater. 23, 765 (1994).10.1007/BF02651371 ↗
11. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
12. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 1229 (1998).10.1007/s11664-998-0074-7 ↗
13. U.R. Kattner and W.J. Boettinger, J. Electron. Mater. 23, 603 (1994).10.1007/BF02653345 ↗
14. M. McCormack and S. Jin, J. Electron. Mater. 23, 715 (1994).10.1007/BF02651364 ↗
15. S. Jin and M. McCormack, J. Electron. Mater. 23, 735 (1994).10.1007/BF02651367 ↗
16. J.S. Benjamin, Metall. Trans. 1, 2943 (1970).10.1007/BF03037835 ↗
17. J.S. Benjamin, Sci. Am. 234, 40 (1976).10.1038/scientificamerican0576-40 ↗
18. C.C. Koch, Annl. Rev. Mater. Sci. 19, 121 (1989).10.1146/annurev.ms.19.080189.001005 ↗
19. C.C. Koch, O.B. Cavin, C.G. Mckamey, and J.O. Scarbrough, Appl. Phys. Lett. 43, 1017 (1983).10.1063/1.94213 ↗
20. J.S.C. Jang and C.C. Koch, Scripta. Metall. et Mater. 24, 1599 (1990).10.1016/0956-716X(90)90439-N ↗
21. D.G. Morris and M.A. Morris, Acta Metall. et Mater. 30, 1763 (1991).10.1016/0956-7151(91)90144-P ↗
22. Y. Ogino, M. Miki, T. Yamasaki, and T. Inuma, Mater. Sci. Forum 88–90, 795 (1992).10.4028/www.scientific.net/MSF.88-90.795 ↗
23. G.B. Schaffer, Scripta Metall. et Mater. 27, 1 (1992).10.1016/0956-716X(92)90309-3 ↗
24. K. Uenishi, K.F. Kobayashi, K.N. Ishihara, and P.H. Shingu, Mater. Sci. Eng. A134, 1342 (1991).10.1016/0921-5093(91)90987-X ↗
25. M.L. Huang, C.M.L. Wu, L. Wang, F.G. Wang, and J.K.L. Lai, accepted by J. Mat. Sci.: Mater. in Electron. (1999).
26. D. Frear, D. Grivas, and J.W. Morris, Jr., J. Electron. Mater. 16, 181 (1987).10.1007/BF02655484 ↗
27. H.K. Kim, H.K. Loiu, and K.N. Tu, Appl. Phys. Lett. 66 (18), 2237 (1995).