journal article·2001-09

Sn-Zn-Al Pb-free solder—An inherent barrier solder for Cu contact

Kwang-Lung Lin, Hui-Min Hsu

Journal of Electronic Materials· Volume 30· Issue 9
Publisher page

Abstract

Flip chip solder bumps were produced on Cu contact applying Sn-9Zn-xAl Pb-free solder by dipping method. The solder bumps were tested under 85 C/85% RH (relative humidity) or at 150 C for 1000 hours to explore the shear strength and the interfacial interaction behavior. Experimental results revealed that Al and Zn, while not Sn, diffuse to the Cu/solder interface during the extended period test. A thin layer of Al4.2Cu3.2Zn0.7 compound, characterized by XRD, was formed at the interface of the as-produced solder bump. This compound which resulted from the gathering of Al at the interface, provides a barrier to Sn diffusion toward Cu substrate and, thus, no Cu-Sn compound was detected. This is the first time to find a Sn-containing solder which, in contact with Cu, does not form Cu-Sn intermetallic compound during heat treatment and, thus, the Sn-Zn-Al solder is termed an inherent barrier solder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. J.L. Piechota, Principles of Electron. Pkg., ed. D.P. Seraphim, R.C. Lasky, and C.-Y. Li (New York: McGraw-Hill, 1989), ch. 7.
2. K.L. Lin, W.L. Chen, J.C. Ho, H.K. Chow, and C.T. Tu (Paper presented at the Adv. Electron. Assembly Symp. on Pb-Free Interconnect, Boston, MA, 13–14 June 2000).
3. J.H. Lau, Flip Chip Technologies, ed. J.H. Lau (New York: McGraw-Hill, 1996), ch. 1.
4. L.S. Goldmann and P.A. Totta, Chip on Board Technologies for Multichip Modules, ed. J.H. Lau (New York: Van Nostrand Reinhold, 1994), ch. 5.
5. M. Pecht, Integrated Circuit Hybrid, and Multichip Module Package Design Guidelines (New York: John Wiley & Sons, 1994), ch. 7.
6. G.H. Adema, C.J. Berry, N.G. Koopman, G.A. Rinne, E.K. Yung, and E. Turlike, Int. J. Microcirc. Electron. Pkg. 17, 352 (Fourth quarter 1994).
7. P.T. Vianco and D.R. Frear, JOM 45, 14 (1993).10.1007/BF03222374 ↗
8. J.W. Morris, Jr., J.L. Freer Goldstein, and Z. Mei, JOM 45, 25 (1993).10.1007/BF03222376 ↗
9. C.H. Raeder, L.E. Felton, V.A. Tanzi, and D.B. Knorr, J. Electron. Mater. 23, 611 (1994).10.1007/BF02653346 ↗
10. L.E. Felton, C.H. Raeder, and D.B. Knorr, JOM 45, 28 (1993).10.1007/BF03222377 ↗
11. W.L. Winterbottom, JOM 45, 20 (1993).10.1007/BF03222375 ↗
12. W.J. Tomlinson and I. collier, J. Mater. Sci. 22 1835 (1987).10.1007/BF01132413 ↗
13. M. Harada and R. Satoh, IEEE Trans. Components, Hybrids, and Manufacturing Technol. 3, 736 (1990).10.1109/33.62587 ↗
14. Z. Mei and J.W. Morris, Jr., J. Electron. Mater. 21, 599 (1992).10.1007/BF02655427 ↗
15. M. McCormack, S. Jin, G.W. Kammlot, and H.S. Chen, Appl. Phys. Lett. 63, 15 (1993).10.1063/1.109734 ↗
16. M. McCormack, S. Jin, H.S. Chen, and D.A. Machusak, J. Electron. Mater. 23, 687 (1994).10.1007/BF02653357 ↗
17. M. McCormack and S. Jin, J. Electron. Mater. 23, 635 (1994).10.1007/BF02653349 ↗
18. D.B. Masson and R.K. Kirkpatrick, J. Electron. Mater. 15, 349 (1986).10.1007/BF02661884 ↗
19. G. Ghosh, M. Loomans, and M.E. Fine, J. Electron. Mater. 23, 619 (1994).10.1007/BF02653347 ↗
20. U.R. Kattner and W.J. Boettinger, J. Electron. Mater. 23, 603 (1994).10.1007/BF02653345 ↗
21. C.M. Miller, I.E. Anderson, and J.F. Smith, J. Electron. Mater. 23, 595 (1994).10.1007/BF02653344 ↗
22. K.L. Lin, L.H. Wen, and T.P. Liu, J. Electron. Mater. 27, 97 (1998).10.1007/s11664-998-0197-x ↗
23. V. Sivan, S. Roy, V. Balasubramaniyan, and B.A. Shenol, Met. Finish. 48 (Sept. 1978).
24. H.E. Biber, Metall. Trans. A 19A, 1603 (1988).10.1007/BF02674035 ↗
25. K.L. Lin and T.P. Liu, Oxid. Met. 50, 255 (1998).10.1023/A:1018840405283 ↗
26. K.L. Lin and T.P. Liu, Mater. Chem. Phys. 56, 171 (1998).10.1016/S0254-0584(98)00171-0 ↗
27. M. Hansen and K. Anderko, Constitution of Binary Alloys (New York: McGraw-Hill, 1989), p. 85.
28. S.P. Yu, H.C. Wang, M.H. Hon, and M.C. Wang, JOM 52, 36 (2000).
29. C.Y. Lee and K.L. Lin, J. Mater. Sci. Mater. Electron. 8, 377 (1997).10.1023/A:1018599609177 ↗
30. K.L. Lin and C.Y. Lee, U.S. patent 5,795,619 (18 August 1998).