journal article·2025-06Open access

Direct Laser Writing of Nucleation Sites for Patterned Diamond Growth

Sumeer Khanna, Jagdish Narayan, Roger Narayan

Journal of Electronic Materials· Volume 54· Issue 6

Abstract

Abstract Direct laser writing (3D printing) is rapidly emerging as a versatile method for fabricating novel 3D structures that are needed for quantum computing, superconducting devices, selective coatings, and biomedical sensors. Here, we have created 2D patterns with potential for 3D diamond structures by direct laser writing lithography, which are carbonized in an inert Ar atmosphere at 540°C and then used as nucleation sites for diamond growth via hot-filament chemical vapor deposition (HFCVD). An array of 3D structures was fabricated via a two-photon polymerization process using a photo-polymeric resin on Si (100) and sapphire (0001) substrates. These 3D structures carbonized by thermal annealing show approximately 45–55% sp3 content, as confirmed by Raman spectroscopy and x-ray photoelectron spectroscopy (XPS) analytical techniques. As per the end application of the device, the computer-aided design (CAD) of the structure can be modified to innovative shapes that can be carbonized to provide selective nucleation sites for placing diamond crystallites at the desired locations, which is an important component for device fabrication. The diamond crystallites show a distinctive Raman peak upshift in the range of 1333–1335 cm−1 with a full width at half maximum of ≤ 5 cm−1, indicating some strain across the diamond and Si (100) substrate. A fourfold growth morphology with {111} planes of diamond crystallites is shown by high-resolution scanning electron microscopy (HR-SEM), which correlates with the <100> growth of diamond. Additionally, we show the possibility of creating 3D structures in Q-carbon phase with embedded nanodiamond crystallites via pulsed laser annealing (PLA) of carbonized structures. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Adhesion, Friction, and Surface Interactions · Tribology and Lubrication Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. J. Bauer, A. Schroer, R. Schwaiger, and O. Kraft, Approaching theoretical strength in glassy carbon nanolattices. Nat. Mater. 15, 438 (2016).10.1038/nmat4561 ↗
2. T. Bückmann, N. Stenger, M. Kadic, J. Kaschke, A. Frölich, T. Kennerknecht, C. Eberl, M. Thiel, and M. Wegener, Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography. Adv. Mater. 24, 2710 (2012).10.1002/adma.201200584 ↗
3. G. Von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch, and M. Wegener, Three-dimensional nanostructures for photonics. Adv. Funct. Mater. 20, 1038 (2010).10.1002/adfm.200901838 ↗
4. J. Bauer, S. Hengsbach, I. Tesari, R. Schwaiger, and O. Kraft, High-strength cellular ceramic composites with 3D microarchitecture. Proc. Natl. Acad. Sci. USA 111, 2453 (2014).10.1073/pnas.1315147111 ↗
5. L.R. Meza, S. Das, and J.R. Greer, Strong, lightweight, and recoverable three-dimensional ceramic nanolattices. Science 345, 1322 (2014).10.1126/science.1255908 ↗
6. A.W. Schell, J. Kaschke, J. Fischer, R. Henze, J. Wolters, M. Wegener, and O. Benson, Three-dimensional quantum photonic elements based on single nitrogen vacancy-centres in laser-written microstructures. Sci. Rep. 3, 3 (2013).10.1038/srep01577 ↗
7. G. Roberts, C. Ballew, T. Zheng, J.C. Garcia, S. Camayd-Muñoz, P.W.C. Hon, and A. Faraon, 3D-patterned inverse-designed mid-infrared metaoptics. Nat Commun 14, 2768 (2023).10.1038/s41467-023-38258-2 ↗
8. A.I. Aristov, M. Manousidaki, A. Danilov, K. Terzaki, C. Fotakis, M. Farsari, and A.V. Kabashin, 3D plasmonic crystal metamaterials for ultra-sensitive biosensing. Sci. Rep. 6, 1 (2016).10.1038/srep25380 ↗
9. S. Li, Z. Shen, W. Yin, L. Zhang, and X. Chen, 3D printed cross-shaped terahertz metamaterials with single-band, multi-band and broadband absorption. Opt. Mater. (Amst) 122, 111739 (2021).10.1016/j.optmat.2021.111739 ↗
10. Nanoscribe, Facts and Figures on Photonic Professional GT2, https://www.nanoscribe.com/en/products/photonic-professional-gt2/#tab-17297.
11. A. Vyatskikh, S. Delalande, A. Kudo, X. Zhang, C.M. Portela, and J.R. Greer, Additive manufacturing of 3D nano-architected metals. Nat Commun 9, 593 (2018).10.1038/s41467-018-03071-9 ↗
12. M.A. Haque, N.V. Lavrik, A. Hedayatipour, D. Hensley, D.P. Briggs, and N. McFarlane, Carbonization of 3D printed polymer structures for CMOS-compatible electrochemical sensors. J. Vac. Sci. Technol. B Nanotechnol. Microelectron. Mater. Process. Measur. Phenom. 38, 052203 (2020).
13. B. Cardenas-Benitez, C. Eschenbaum, D. Mager, J.G. Korvink, M.J. Madou, U. Lemmer, I. De Leon, and S.O. Martinez-Chapa, Pyrolysis-induced shrinking of three-dimensional structures fabricated by two-photon polymerization: experiment and theoretical model. Microsyst. Nanoeng. 5, 38 (2019).10.1038/s41378-019-0079-9 ↗
14. Q. Cao, M. Shin, N.V. Lavrik, and B.J. Venton, 3D-printed carbon nanoelectrodes for in vivo neurotransmitter sensing. Nano Lett. 20, 6831 (2020).10.1021/acs.nanolett.0c02844 ↗
15. F.C. Cowlard and J.C. Lewis, Vitreous carbon—a new form of carbon. J. Mater. Sci. 2, 507 (1967).10.1007/BF00752216 ↗
16. A. Shanta, K. Mamun, S. Islam, N. McFarlane, and D. Hensley, Carbon nanotubes, nanofibers and nanospikes for electrochemical sensing: a review. Int. J. High Speed Electron. Syst. 26, 1740008 (2017).10.1142/S0129156417400080 ↗
17. Y. Yu, K. Mamun, A. Shanta, S. Islam, and N. McFarlane, Vertically aligned carbon nanofibers as cell impedance sensor. IEEE Trans. Nanotechnol. 15, 856 (2016).10.1109/TNANO.2016.2558102 ↗
18. R.K. Singh, D.R. Gilbert, J. Fitz-Gerald, S. Harkness, and D.G. Lee, Engineered interfaces for adherent diamond coatings on large thermal-expansion coefficient mismatched substrates. Science 272, 396 (1996).10.1126/science.272.5260.396 ↗
19. D.G. Lee, J.M. Fitz-Gerald, and R.K. Singh, Novel method for adherent diamond coatings on cemented carbide substrates. Surf. Coat. Technol. 100, 187 (1998).10.1016/S0257-8972(97)00612-9 ↗
20. M. Wang, Y.S. Zhou, Z.Q. Xie, Y. Gao, X.N. He, L. Jiang, and Y.F. Lu, Seed-free growth of diamond patterns on silicon predefined by femtosecond laser direct writing. Cryst. Growth Des. 13, 716 (2013).10.1021/cg301440k ↗
21. K. Czyz, J. Marczak, R. Major, A. Mzyk, A. Rycyk, A. Sarzyński, and M. Strzelec, Selected laser methods for surface structuring of biocompatible diamond-like carbon layers. Diam. Relat. Mater. 67, 26 (2016).10.1016/j.diamond.2016.01.013 ↗
22. V.Y. Armeyev, N.I. Chapliev, I.M. Chistyakov, V.I. Konov, V.G. Ralchenko, V.E. Strelnitsky, and V.Y. Volkov, Direct laser writing of microstructures in diamond-like carbon films. Mater. Manuf. Process. 8, 9 (1993).10.1080/10426919308934811 ↗
23. A.M. Berhane, C.G. Baldwin, K. Liang, M. Moshkani, C. Lustri, J.E. Downes, C. Stampfl, and R.P. Mildren, Morphogenesis of mesoscopic surface patterns formed in polarized two-photon etching of diamond. Carbon NY 173, 271 (2021).10.1016/j.carbon.2020.09.029 ↗
24. J. Narayan, Path for room-temperature superconductivity in B-doped Q-carbon related materials. MDPI Carbon 10, 1 (2024).
25. Nanoscribe GmbH, 3D Printing Using Two Photon Polymerization (2PP) | NanoGuide, https://support.nanoscribe.com/hc/en-gb/articles/360008908273-3D-Printing-using-Two-Photon-Polymerization-2PP-.
26. S. Juodkazis, V. Mizeikis, K.K. Seet, M. Miwa, and H. Misawa, Two-photon lithography of nanorods in SU-8 photoresist. Nanotechnology 16, 846 (2005).10.1088/0957-4484/16/6/039 ↗
27. A.K. Nguyen and R.J. Narayan, Two-photon polymerization for biological applications. Mater. Today 20, 314 (2017).10.1016/j.mattod.2017.06.004 ↗
28. O. I. WITec, Alpha300 R – Raman Imaging Microscope, https://raman.oxinst.com/products/raman-microscopes/raman-imaging-alpha300r
29. H. Hantsche, High Resolution XPS of Organic Polymers, the Scienta ESCA300 Database. By G. Beamson and D. Briggs, Wiley, Chichester 1992, 295 Pp., Hardcover, £ 65.00, ISBN 0-471-93592-1 (1993).10.1002/adma.19930051035 ↗
30. C. University, XPS Analysis, https://sites.cardiff.ac.uk/xpsaccess/reference/carbon/.
31. Q. Wei and J. Narayan, Superhard diamondlike carbon: preparation, theory, and properties. Int. Mater. Rev. 45, 133 (2000).10.1179/095066000101528340 ↗
32. AZO materials, Diamond (C) - Properties and Applications, https://www.azom.com/article.aspx?ArticleID=262.
33. J. Narayan, Recent progress in thin film epitaxy across the misfit scale (2011 Acta Gold Medal Paper). Acta Mater. 61, 2703 (2013).10.1016/j.actamat.2012.09.070 ↗
34. C. Baruffi and C. Brandl, On the structure of (111) twist grain boundaries in diamond: atomistic simulations with Tersoff-type interatomic potentials. Acta Mater. 215, 117055 (2021).10.1016/j.actamat.2021.117055 ↗
35. A. Bogatskiy and J.E. Butler, A geometric model of growth for cubic crystals: diamond. Diam. Relat. Mater. 53, 58 (2015).10.1016/j.diamond.2014.12.010 ↗
36. J. Narayan, A. Bhaumik, S. Gupta, P. Joshi, P. Riley, and R.J. Narayan, Role of Q-carbon in nucleation and formation of continuous diamond film. Carbon N Y 176, 558 (2021).10.1016/j.carbon.2021.02.049 ↗
37. J. Narayan and A. Bhaumik, Novel phase of carbon, ferromagnetism, and conversion into diamond. J. Appl. Phys. 118, 215303 (2015).10.1063/1.4936595 ↗