Study of Flux/E-GaIn Interfacial Tension and Wetting Behavior of Fluxes
Source abstract
Abstract
The interfacial tension between flux and liquid metal is a crucial parameter during the soldering process, but is often ignored. In this work, based on the pendant-drop method, the effect of the electric field on the interfacial tension of a GaIn alloy in flux was studied. The results show that the interfacial tension was reduced by eutetic GaIn (E-GaIn) adsorbing R·COO− ions in the rosin-ethanol solution. When the metal droplet was applied to the positive electrode, a significant further reduction in the interfacial tension was achieved. Based on the top-view sessile drop method, the wetting behavior of rosin-ethanol flux and orthophosphoric acid aqueous solution on Al, Cu, and 430ss substrates was studied, in which the former flux is a quasi-inert wetting system, and the latter is a typical reactive wetting system, which can be described by a reaction-limited spreading model. On this basis, we used orthophosphoric acid flux as an auxiliary and the E-GaIn alloy as a filler, and the Cu-Cu joint was successfully implemented under conditions close to room temperature, thus providing the possibility for low-temperature (or even room-temperature) joining with high-temperature operation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Semiconductor materials and devices · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. G. Humpston and D.M. Jacobson, Principles of Soldering (Materials Park: ASM International, 2004).10.31399/asm.tb.ps.9781627083522 ↗
2. W.F. Gale and T.C. Totemeier, Smithells Metals Reference Book (Amsterdam: Elsevier, 2003).
3. S.-Y. Tang, K. Khoshmanesh, V. Sivan, P. Petersen, A.P.O. Mullane, D. Abbotte, A. Mitchell, and K. Kalantar-zadeh, Liquid Metal Enabled Pump. Proc. Natl. Acad. Sci. U.S.A. 111, 3304 (2014).10.1073/pnas.1319878111 ↗
4. L. Sheng, J. Zhang, and J. Liu, Diverse Transformations of Liquid Metals Between Different Morphologies. Adv. Mater. 26, 6036 (2014).10.1002/adma.201400843 ↗
5. F.H. Howie and E.D. Hondros, The Surface Tension of Tin-Lead Alloys in Contact with Fluxes. J. Mater. Sci. 17, 1434 (1982).10.1007/BF00752257 ↗
6. T. Utigard, J.M. Toguri, and T. Nakamura, Interfacial Tension and Flotation Characteristics of Liquid Metal-Sodium Flux Systems. Metall. Trans. B 17, 339 (1986).10.1007/BF02655081 ↗
7. H. Sun, K. Nakashima, and K. Mori, Influence of Slag Composition on Slag-Iron Interfacial Tension. ISIJ Int. 46, 407 (2006).10.2355/isijinternational.46.407 ↗
8. M. Miyazaki, M. Mizutani, T. Takemoto, and A. Matsunawa, Conditions for the Measurement of Surface Tension of Solders with a Wetting Balance Tester (Materials, Metallurgy & Weldability). Trans. JWRI 26, 81 (1997).
9. L. Martin-Garin, A. Dinet, and J.M. Hicter, Liquid-Liquid Interfacial Tension Measurements Applied to Molten Al-halide Systems. J. Mater. Sci. 14, 2366 (1979).10.1007/BF00737025 ↗
10. N. Eustathopoulos, M.G. Nicholas, and B. Drevet, Wettability at High Temperatures (Oxford: Elsevier, 1999).
11. J. Liu, Advanced Liquid Metal Cooling for Chip, Device and System (Singapore: World Scientific, 2019)
12. B. Song and J. Springer, Determination of Interfacial Tension from the Profile of a Pendant Drop Using Computer-Aided Image Processing: 1. Theoretical. J. Colloid Interface Sci. 184, 64 (1996).
13. A. Plech, U. Klemradt, H. Metzger, and J. Peisl, In Situ X-Ray Reflectivity Study of the Oxidation Kinetics of Liquid Gallium and the Liquid Alloy. J. Phys.: Condens. Matter 10, 971 (1998).
14. G. Lippmann, Relations entre les phénomènes électriques et capillaires. Ann. Chim. Phys 5, 494 (1875).
15. Q. Lin and G. Zhang, Electrocapillary Deformation and Electric Voltage Induced Flow of Liquid Wood Alloy in NaOH Aqueous Solution. Mater. Trans. 58, 795 (2017).10.2320/matertrans.M2016414 ↗
16. P. Shen, D. Zhang, Q.-L. Lin, L.-X. Shi, and Q.-C. Jiang, Wetting of Polycrystalline α-Al2O3 by Molten Mg in Ar Atmosphere. Metall. and Mater. Trans. A. 41, 1621 (2010).10.1007/s11661-010-0224-4 ↗
17. D. Zhang, P. Shen, L. Shi, Q. Lin, and Q. Jiang, Wetting and Evaporation Behaviors of Molten Mg on Partially Oxidized SiC Substrates. Appl. Surf. Sci. 256, 7043 (2010).10.1016/j.apsusc.2010.05.022 ↗
18. H.C. Shi and A.P. Xian, Effect of Organic acid in Isopropyl Alcohol Fluxes on Wetting of Sn-Bi Solder on Cu Surface, 12th International Conference on Electronic Packaging Technology and High Density Packaging, 2011, 1–5.10.1109/ICEPT.2011.6066813 ↗
19. K. Grundke, S. Michel, K.J. Eichhorn, D. Beyerlein, and T. Bayer, Influence of Chemical Interactions on the Macroscopic Spreading of a Maleic Anhydride Copolymer Melt. Macromol. Chem. Phys. 203, 937 (2002).10.1002/1521-3935(20020401)203:7<937::AID-MACP937>3.0.CO;2-C ↗
20. B. Laing, D. Seveno, J. De Keyzer, and A. Van Bael, Reactive Wetting of Polyethylene on Ethylene-Propylene-Diene Terpolymer. Colloid Interface Sci. Commun. 40, 100343 (2021).10.1016/j.colcom.2020.100343 ↗
21. L. Chen, E. Bonaccurso, T. Gambaryan-Roisman, V. Starov, N. Koursari, and Y. Zhao, Static and Dynamic Wetting of Soft Substrates. Curr. Opin. Colloid Interface Sci. 36, 46 (2018).10.1016/j.cocis.2017.12.001 ↗
22. P.G. De Gennes, The Dynamics of Reactive Wetting on Solid Surfaces. Physica A 249, 196 (1998).10.1016/S0378-4371(97)00466-4 ↗
23. T.B. Massalski, Binary Phase Diagram (CD-ROM) (Materials Park: ASM International, 1996).