Effect of Surface State on DC Breakdown Characteristics of Thermally Aged Double-Layered Polyester Films
Source abstract
Abstract
The surface state of polymer films has a significant influence on direct current (DC) breakdown characteristics, but its mechanism needs further investigation. In this paper, DC breakdown strength of thermally aged two-layer polyester films is studied. The charge trap and their space distribution characteristics are analyzed by an isothermal relaxation current and the pulsed electro-acoustic method. Furthermore, a bipolar charge transport model suitable for two-layer dielectrics is established, and the correlation between surface state and DC breakdown performance is dynamically simulated. The experimental results show that as the aging time increases, DC breakdown strength first increases and then decreases. The trap depth and its density first increase and then decrease, and the change mainly comes from dielectric surface area. The simulation results show that through modulating the injection and accumulation behaviors of space charges, the change of trap depth, density and extended depth of surface state have an important effect on the space charge and electric field distribution at the pre-breakdown time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Power Transformer Diagnostics and Insulation · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. O.S. Gefle, S.M. Lebedev, V.A. Volokhin, S.N. Tkachenko, E.I. Cherkashina, Estimation of critical parameters of PET film insulation, in The 9th Russian–Korean International Symposium on Science and Technology (2005), p.143
2. O.S. Gefle, S.M. Lebedev, Y.P. Pokholkov, I. Vitellas, and D.P. Agoris, O.S. Gefle, S.M. Lebedev, Y.P. Pokholkov, I. Vitellas, and D.P. Agoris, IEE Proc. Sci. Meas. Technol., 2004, 151, p 273.10.1049/ip-smt:20040554 ↗
3. D. Adhikari, D.M. Hepburn, B.G. Stewart, Comparison of PD characteristics and degradation in PET insulation with vented and unvented voids, in IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena (2011), pp. 444
4. Q. Wang, C.-J. Ji, L. Huang, J.-W. Zhang, and R. Shi, Q. Wang, C.-J. Ji, L. Huang, J.-W. Zhang, and R. Shi, Int. J. Mod. Phys. B, 2019, 33, p 1950209.10.1142/S0217979219502096 ↗
5. G.C. Montanari, G.C. Montanari, IEEE Trans. Dielectr. Electr. Insul., 2011, 18, p 339.10.1109/TDEI.2011.5739438 ↗
6. K. Matsui, Y. Tanaka, T. Takada, T. Fukao, K. Fukunaga, T. Maeno, and J.M. Alison, K. Matsui, Y. Tanaka, T. Takada, T. Fukao, K. Fukunaga, T. Maeno, and J.M. Alison, IEEE Trans. Dielectr. Electr. Insul., 2005, 12, p 406.10.1109/TDEI.2005.1453444 ↗
7. Y. Zhou, C. Dai, and M. Huang, Y. Zhou, C. Dai, and M. Huang, CSEE J. Power Energy, 2016, 2, p 40.10.17775/CSEEJPES.2016.00020 ↗
8. G.C. Montanari, G.C. Montanari, IEEE Trans. Dielectr. Electr. Insul., 2000, 7, p 309.10.1109/94.848905 ↗
9. F. Tian, J. Zhang, P. Xiao, and C. Hou, F. Tian, J. Zhang, P. Xiao, and C. Hou, IEEE Trans. Dielectr. Electr. Insul., 2017, 24, p 1888.10.1109/TDEI.2017.006435 ↗
10. J. Wu, L. Li, X. Li, Y. Yi, The influence of nano-filler on space charge distribution in LDPE/silica nanocomposites, in IEEE International Conference on Electrical Insulation Measurements (2012), p. 341
11. Y. Murakami, M. Nemoto, S. Okuzumi, S. Masuda, M. Nagao, N. Hozumi, and Y. Sekiguchi, Y. Murakami, M. Nemoto, S. Okuzumi, S. Masuda, M. Nagao, N. Hozumi, and Y. Sekiguchi, IEEE Trans. Dielectr. Electr. Insul., 2008, 15, p 33.10.1109/T-DEI.2008.4446734 ↗
12. S. Mitsumoto, K. Tanaka, M. Fukuma, M. Nagao, M. Kosaki, Observation of electrical breakdown and space charge formation in acetophenone-coated LDPE film under AC voltage application, in International Symposium on Electrical Insulating Materials (1998), p. 97
13. C. Li, J. He, and J. Hu, C. Li, J. He, and J. Hu, IEEE Trans. Dielectr. Electr. Insul., 2016, 23, p 3071.10.1109/TDEI.2016.7736871 ↗
14. Y. Ma, C. Zhang, C. Li, G. Chen, and T. Shao, Y. Ma, C. Zhang, C. Li, G. Chen, and T. Shao, Proc. CSEE, 2016, 36, p 1731.
15. S. Li, D. Min, W. Wang, and G. Chen, S. Li, D. Min, W. Wang, and G. Chen, IEEE Trans. Dielectr. Electr. Insul., 2016, 23, p 3476.10.1109/TDEI.2016.006051 ↗
16. J. Zhao, G. Chen, and L. Zhong, J. Zhao, G. Chen, and L. Zhong, IEEE Trans. Dielectr. Electr. Insul., 2014, 21, p 1757.10.1109/TDEI.2014.004213 ↗
17. J. Zhao, Z. Xu, G. Chen, and P.L. Lewin, J. Zhao, Z. Xu, G. Chen, and P.L. Lewin, J. Appl. Phys., 2010, 108, p 778.
18. M. Taleb, T.G. Roy, and S.L.C. Laurent, M. Taleb, T.G. Roy, and S.L.C. Laurent, IEEE Trans. Dielectr. Electr. Insul., 2013, 20, p 311.10.1109/TDEI.2013.6451372 ↗
19. M. Beigert, H.G. Kranz, Destruction free ageing diagnosis of power cable insulation using the isothermal relaxation current analysis, in IEEE International Symposium on Electrical Insulation Material (1994), p. 17
20. P. Morshuis, and M. Jeroense, P. Morshuis, and M. Jeroense, IEEE Electr. Insul. Mag., 1997, 13, p 26.10.1109/57.591529 ↗
21. S.L. Roy, G. Teyssedre, C. Laurent, L.A. Dissado, G.C. Montanari, Relative importance of trapping and extraction in the simulation of space charge distribution in polymeric insulators under DC potentials, in IEEE International Conference on Solid Dielectrics (2007), p. 494
22. S. Tantipattarakul, A.S. Vaughan, T. Andritsch, S. Virtanen, Effect of interface chemistry on charge injection and trapping in polyethylene blend, in 17th International Symposium on HVDC Cable Systems (2017), p. 1
23. K. Yang, G.J. Zhang, M. Dong, Z. Yan, Electroluminescence and surface trap distribution in polymeric insulation, in IEEE International Conference on Solid Dielectrics (2007), p. 235
24. G. Chen, J. Zhao, S. Li, and L. Zhong, G. Chen, J. Zhao, S. Li, and L. Zhong, Appl. Phys. Lett., 2012, 100, p 2135.
25. L. Ning, C. Zhou, G. Chen, X. Yang, J. Cao, and H. Wang, L. Ning, C. Zhou, G. Chen, X. Yang, J. Cao, and H. Wang, High Volt., 2016, 1, p 95.10.1049/hve.2016.0012 ↗