Enhancing Capacitive Self-sensing Ability of Cement Mortar by Designing Electrode Configuration
Source abstract
Abstract
Capacitance-based measurement, which enables self-sensing without the need for any conductive additives, is very advantageous for the construction and building sector as it can be applied both in existing and newly constructed structures. In this study, the most effective electrode configuration has been investigated to detect the most effective self-sensing ability. Capacitive self-sensing measurements were conducted in a 10.3-kPa to 41.2-kPa stress regime during loading and subsequent unloading at progressively increasing stress levels. Aluminum foil acting as the electrode was attached to the mortar plate using dielectric film. The capacitance was measured by an LCR meter. The most effective configuration for self-sensing was determined by varying the area of the coplanar electrodes and the distances between them. The sensing effectiveness increased with decreasing electrode width, such that the highest effectiveness was obtained when the width was 1.5 cm. Moreover, the effectiveness increased with decreasing inter-electrode distance, such that the highest effectiveness was obtained when the distance is 10 cm. With the optimum electrode design, the highest sensing effectiveness of 4.4% was reached. So, the most effective capacitive self-sensing is achieved by positioning the electrodes closest to the area where the load is applied and keeping the electrode area low.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Structural Health Monitoring Techniques · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. T. Huang and Z. Sun, Advances in multifunctional graphene-geopolymer composites. Constr. Build. Mater. (2021). https://doi.org/10.1016/j.conbuildmat.2020.121619.10.1016/j.conbuildmat.2020.121619 ↗
2. I. Abavisani, O. Rezaifar, and A. Kheyroddin, Multifunctional properties of shape memory materials in civil engineering applications: a state-of-the-art review. J. Build. Eng. (2021). https://doi.org/10.1016/j.jobe.2021.102657.10.1016/j.jobe.2021.102657 ↗
3. S. Ding, J. Wang, S. Dong, A. Ashour, Y. Liu, L. Qiu, B. Han, and J. Ou, Developing multifunctional/smart civil engineering materials to fight viruses. ACS Sustain. Chem. Eng. 10, 678–690 (2022). https://doi.org/10.1021/acssuschemeng.1c07642.10.1021/acssuschemeng.1c07642 ↗
4. I.R. Segundo, E. Freitas, V.T.F.C. Branco, S. Landi, M.F. Costa, and J.O. Carneiro, Review and analysis of advances in functionalized, smart, and multifunctional asphalt mixtures. Renew. Sustain. Energy Rev. (2021). https://doi.org/10.1016/j.rser.2021.111552.10.1016/j.rser.2021.111552 ↗
5. M. Fahimizadeh, P. Pasbakhsh, L.S. Mae, J.B.L. Tan, and R.K.S. Raman, Multifunctional, sustainable, and biological non-ureolytic self-healing systems for cement-based materials. Engineering 13, 217–237 (2022). https://doi.org/10.1016/j.eng.2021.11.016.10.1016/j.eng.2021.11.016 ↗
6. Y. Guo, W. Li, W. Dong, K. Wang, X. He, K. Vessalas, and D. Sheng, Self-sensing cement-based sensors with superhydrophobic and self-cleaning capacities after silane-based surficial treatments. Case Stud. Constr. Mater. 17, e01311 (2022). https://doi.org/10.1016/j.cscm.2022.e01311.10.1016/j.cscm.2022.e01311 ↗
7. X. Xi and D.D.L. Chung, Deviceless cement-based structures as energy sources that enable structural self-powering. Appl. Energy (2020). https://doi.org/10.1016/j.apenergy.2020.115916.10.1016/j.apenergy.2020.115916 ↗
8. D.D.L. Chung and M. Ozturk, Electromagnetic skin depth of cement paste and its thickness dependence. J. Build. Eng. (2022). https://doi.org/10.1016/j.jobe.2022.104393.10.1016/j.jobe.2022.104393 ↗
9. M. Ozturk, and D.D.L. Chung, Capacitance-based stress self-sensing in asphalt without electrically conductive constituents, with relevance to smart pavements. Sens. Actuators A Phys. (2022). https://doi.org/10.1016/j.sna.2022.113625.10.1016/j.sna.2022.113625 ↗
10. M. Ozturk, Self-sensing reinforced concrete for damage assessment and real time strength development in smart structures. J. Microw. Power Electromagn. Energy 56, 168–177 (2022). https://doi.org/10.1080/08327823.2022.2103628.10.1080/08327823.2022.2103628 ↗
11. D.D.L. Chung, Self-sensing concrete: from resistance-based sensing to capacitance-based sensing. Int. J. Smart Nano Mater. 12, 1–19 (2021). https://doi.org/10.1080/19475411.2020.1843560.10.1080/19475411.2020.1843560 ↗
12. M. Ozturk and D.D.L. Chung, Capacitance-based stress self-sensing effectiveness of a model asphalt without functional component. Constr. Build. Mater. (2021). https://doi.org/10.1016/j.conbuildmat.2021.123591.10.1016/j.conbuildmat.2021.123591 ↗
13. N.E. Hager and R.C. Domszy, Monitoring of cement hydration by broadband time-domain-reflectometry dielectric spectroscopy. J. Appl. Phys. 96, 5117–5128 (2004). https://doi.org/10.1063/1.1797549.10.1063/1.1797549 ↗
14. X. Xi, M. Ozturk and D.D.L. Chung, DC electric polarization of cured cement paste being unexpectedly hindered by free water. J. Am. Ceram. Soc. 105, 1074–1082 (2022). https://doi.org/10.1111/jace.18121.10.1111/jace.18121 ↗
15. W. Li, F. Qu, W. Dong, G. Mishra, and S.P. Shah, A comprehensive review on self-sensing graphene/cementitious composites: a pathway toward next-generation smart concrete. Constr. Build. Mater. (2022). https://doi.org/10.1016/j.conbuildmat.2022.127284.10.1016/j.conbuildmat.2022.127284 ↗
16. Z. Bekzhanova, S.A. Memon, and J.R. Kim, Self-sensing cementitious composites: review and perspective. Nanomaterials (2021). https://doi.org/10.3390/nano11092355.10.3390/nano11092355 ↗
17. M. Abedi, R. Fangueiro, and A. GomesCorreia, A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructures. Constr. Build. Mater. (2021). https://doi.org/10.1016/j.conbuildmat.2021.125139.10.1016/j.conbuildmat.2021.125139 ↗
18. J. Lian, C. Hu, T. Fu, and Y. Wang, Review of self-sensing capability of ultra-high performance concrete. Front. Mater. (2021). https://doi.org/10.3389/fmats.2021.746022.10.3389/fmats.2021.746022 ↗
19. M. Perry, L. Biondi, J. McAlorum, C. Vlachakis, Self-sensing concrete repairs based on alkali-activated materials: Recent progress, in: Conf. Rec.—IEEE Instrum. Meas. Technol. Conf., 2021. https://doi.org/10.1109/I2MTC50364.2021.9459969.10.1109/I2MTC50364.2021.9459969 ↗
20. G.H. Nalon, R.F. Santos, G.E.S. de Lima, I.K.R. Andrade, L.G. Pedroti, J.C.L. Ribeiro, and J.M. Franco de Carvalho, Recycling waste materials to produce self-sensing concretes for smart and sustainable structures: a review. Constr. Build. Mater. (2022). https://doi.org/10.1016/j.conbuildmat.2022.126658.10.1016/j.conbuildmat.2022.126658 ↗
21. K. Ramachandran, P. Vijayan, G. Murali, and N.I. Vatin, A review on principles, theories and materials for self sensing concrete for structural applications. Materials (2022). https://doi.org/10.3390/ma15113831.10.3390/ma15113831 ↗
22. J. Han, J. Cai, J. Pan, and Y. Sun, Study on the conductivity of carbon fiber self-sensing high ductility cementitious composite. J. Build. Eng. 43, 103125 (2021). https://doi.org/10.1016/j.jobe.2021.103125.10.1016/j.jobe.2021.103125 ↗
23. W. Dong, W. Li, Z. Sun, I. Ibrahim, and D. Sheng, Intrinsic graphene/cement-based sensors with piezoresistivity and superhydrophobicity capacities for smart concrete infrastructure. Autom. Constr. 133, 103983 (2022). https://doi.org/10.1016/j.autcon.2021.103983.10.1016/j.autcon.2021.103983 ↗
24. J.B.L.P. Silva, R.C.C. Lintz, and L.A. Gachet, The utilization of Pearson’s method to analyze piezoresistive effect in self-sensing cement composite with graphite. Mater. Res. 25, 20220051 (2022). https://doi.org/10.1590/1980-5373-MR-2022-0051.10.1590/1980-5373-MR-2022-0051 ↗
25. C. Mizerová, I. Kusák, L. Topolář, P. Schmid, and P. Rovnaník, Self-sensing properties of fly ash geopolymer doped with carbon black under compression. Materials (Basel). 14, 4350 (2021). https://doi.org/10.3390/ma14164350.10.3390/ma14164350 ↗
26. H. Wang, F. Shi, J. Shen, A. Zhang, L. Zhang, H. Huang, J. Liu, K. Jin, L. Feng, and Z. Tang, Research on the self-sensing and mechanical properties of aligned stainless steel fiber-reinforced reactive powder concrete. Cem. Concr. Compos. 119, 104001 (2021). https://doi.org/10.1016/j.cemconcomp.2021.104001.10.1016/j.cemconcomp.2021.104001 ↗
27. X. Xi and D.D.L. Chung, Colossal electric permittivity discovered in polyacrylonitrile (PAN) based carbon fiber, with comparison of PAN-based and pitch-based carbon fibers. Carbon 145, 734–739 (2019). https://doi.org/10.1016/j.carbon.2019.01.069.10.1016/j.carbon.2019.01.069 ↗
28. X. Xi and D.D.L. Chung, Role of grain boundaries in the dielectric behavior of graphite. Carbon 173, 1003–1019 (2021). https://doi.org/10.1016/j.carbon.2020.11.081.10.1016/j.carbon.2020.11.081 ↗
29. X. Xi and D.D.L. Chung, Piezoresistivity and piezoelectricity discovered in aluminum, with relevance to structural self-sensing. Sensor. Actuators A Phys. 289, 144–156 (2019). https://doi.org/10.1016/j.sna.2019.02.013.10.1016/j.sna.2019.02.013 ↗
30. D.D.L. Chung and X. Xi, New concept of electret-based capacitance, as shown for solder and other conductors. J. Mater. Sci. Mater. Electron. 33, 27022–27039 (2022). https://doi.org/10.1007/s10854-022-09366-4.10.1007/s10854-022-09366-4 ↗
31. A.R. West, T.B. Adams, F.D. Morrison et al., Novel high capacitance materials:BaTiO3:La and CaCu3Ti4O12. J. Eur. Ceram. Soc. 24, 1439–1448 (2004). https://doi.org/10.1016/S0955-2219(03)00510-7.10.1016/S0955-2219(03)00510-7 ↗
32. L. Ojeda, J. Oliva, A. Reyes-Montero et al., Synergistic effect between the graphene electrodes and the BiFeO3-BaTiO3 composite to overcome the limit of capacitance in eco-friendly supercapacitors made with a seawater electrolyte. J. Alloys Compd. 938, 168657 (2023). https://doi.org/10.1016/j.jallcom.2022.168657.10.1016/j.jallcom.2022.168657 ↗
33. B. Rrustemi, C. Piotrowicz, M.-A. Jaud et al., Effect of doping on Al2O3/GaN MOS capacitance. Solid-State Electron. 194, 108356 (2022). https://doi.org/10.1016/j.sse.2022.108356.10.1016/j.sse.2022.108356 ↗
34. X. Xi and D.D.L. Chung, Piezoelectret-based and piezoresistivity-based stress self-sensing in steel beams under flexure. Sensor. Actuat. A Phys. 301, 111780 (2020). https://doi.org/10.1016/j.sna.2019.111780.10.1016/j.sna.2019.111780 ↗
35. Y. Wang and D.D.L. Chung, Capacitance-based nondestructive detection of aggregate proportion variation in a cement-based slab. Compos. Part B Eng. 134, 18–27 (2018). https://doi.org/10.1016/j.compositesb.2017.09.015.10.1016/j.compositesb.2017.09.015 ↗
36. D.D.L. Chung and Y. Wang, Capacitance-based stress self-sensing in cement paste without requiring any admixture. Cem. Concr. Compos. 94, 255–263 (2018). https://doi.org/10.1016/j.cemconcomp.2018.09.017.10.1016/j.cemconcomp.2018.09.017 ↗
37. X. Xi, Z. Zhao, W. Zhang et al., Stress and temperature sensing in self-sensing flexible felt composite based on carbon fibers. Carbon 224, 119064 (2024). https://doi.org/10.1016/j.carbon.2024.119064.10.1016/j.carbon.2024.119064 ↗
38. X. Xi and D.D.L. Chung, Piezoelectricity, piezoresistivity and dielectricity discovered in solder. J. Mater. Sci. Mater. Electron. 30, 4462–4462 (2019). https://doi.org/10.1007/s10854-019-00735-0.10.1007/s10854-019-00735-0 ↗
39. D.D.L. Chung and X. Xi, A review of cement-based materials as electroceramics. Ceram. Int. 49, 24621–24642 (2023). https://doi.org/10.1016/j.ceramint.2023.05.107.10.1016/j.ceramint.2023.05.107 ↗
40. X. Xi and D.D.L. Chung, Pyropermittivity as an emerging method of thermal analysis, with application to carbon fibers. J. Therm. Anal. Calorim. 147, 10267–10283 (2022). https://doi.org/10.1007/s10973-022-11240-8.10.1007/s10973-022-11240-8 ↗