journal article·2024-01Open access

The Effect of Joint Thickness on Intermetallic Growth in the In52Sn48(Liquid)/Cu(Solid) Diffusion Couple

Theodore Mouratidis

Journal of Electronic Materials· Volume 53· Issue 1

Abstract

Abstract Intermetallic growth can simultaneously enable low-resistance electrical pathways and determine the lifetime of a solder joint. Motivating this work is a demountable linear bilateral solder joint application, enabled via a vacuum pressure impregnation process. The effect of the initial solder joint thickness $$\delta _j = 25 - 125$$$$\mu $$m on intermetallic growth in this configuration is investigated for the $$\text{In}52\text{Sn}48$$(liquid)/Cu(solid) diffusion couple for temperatures T = 393, 413 and 433 K, in the range just above the $$\text{In}52\text{Sn}48$$ melting temperature of 391 K. It was found that beyond a critical time $$\sim 1-15$$ min into the kinetic reaction, thicker solder joints had more intermetallic growth. There are two intermetallic phases identified in this temperature range: $$\text{Cu}6\text{(In,Sn)}{_5}$$ closer to the Cu substrate, and $$\text{Cu(In,Sn)}2$$ closer to the solder bulk. The intermetallic growth fits give temporal growth exponents between $$n = 0.25 - 0.29$$, indicating that grain boundary diffusion rather than volume diffusion is the predominant growth mechanism. Growth in thicker joints is associated with higher temporal growth exponents; this is attributed to suppressed grain coarsening, as there is Cu dissolution from the intermetallic into the solder bulk in the early stages of the reaction, in more highly unsaturated environments. In addition, there is on average a decrease in the intermetallic phase activation energy with increasing joint thickness. In combination with the literature, the results suggest the linear bilateral joint geometry has a growth constraining effect, and the liquid solder phase state strongly affects the morphology and coarsening of grains, leading to the intermetallic growth trends observed.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. N. Stoloff, C. Liu, and S. Deevi, Emerging applications of intermetallics. Intermetallics 8, 1313 (2000).10.1016/S0966-9795(00)00077-7 ↗
2. E. Wood and K. Nimmo, In search of new lead-free electronic solders. J. Electron. Mater. 23, 709 (1994).10.1007/BF02651363 ↗
3. T. Mouratidis, Low temperature solderdemountable joints for non-insulated, high temperature superconducting fusion magnets. Ph D thesis, Massachusetts Institute of Technology, Department of Aeronautics and Astronautics (2022).
4. C. Chang, Y. Lin, Y. Wang, and C. Kao, The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering. J. Alloys Compd. 492, 99 (2010).10.1016/j.jallcom.2009.11.088 ↗
5. M. Huang and F. Yang, Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate. Nature 4, 7117 (2014).
6. Z. Li, G. Li, B. Li, L. Cheng, J. Huang, and Y. Tang, Size effect on IMC growth in micro-scale Sn-3.0Ag-0.5Cu-0.1TiO2 solder joints in reflow process. J. Alloys Compd. 685, 983 (2016).10.1016/j.jallcom.2016.06.295 ↗
7. S. Wang, Y. Yao, and X. Long, Critical review of size effects on microstructure and mechanical properties of solder joints for electronic packaging. Appl. Sci. 9, 227 (2019).10.3390/app9020227 ↗
8. J. Huh, K. Hong, Y. Kim, and K. Kim, Phase field simulations of intermetallic compound growth during soldering reactions. J. Electron. Mater. 33, 1161 (2004).10.1007/s11664-004-0118-6 ↗
9. V. Dybkov, Reaction Diffusion and Solid State Chemical Kinetics (London: IMPS Publications, 2010).
10. Z. Huang, P. Conway, E. Jung, L. Thomson, R. Changqing, T. Loeher, and M. Minkus, Reliability issues in Pb-free solder joint miniaturization. J. Electron. Mater. 35, 1761 (2006).10.1007/s11664-006-0231-9 ↗
11. Z. Huang, P. Conway, L. Changqing, and R. Thomson, The effect of microstructural and geometrical features on the reliability of ultrafine flip chip microsolder joints. J. Electron. Mater. 33, 1227 (2004).10.1007/s11664-004-0126-6 ↗
12. Z. Huang, P. Conway, and L. Changqing, Effect of solder bump geometry on the microstructure of Sn-3.5 wt.% Ag on electroless nickel immersion gold during solder dipping. J. Mater. Res. 20, 649 (2004).10.1557/JMR.2005.0078 ↗
13. K. Tu, J. Lee, and J. Jang, Wetting reaction versus solid state aging of eutectic SnPb on Cu. J. Appl. Phys. 89, 4843 (2001).10.1063/1.1357469 ↗
14. M. Schaefer, R. Fournelle, and J. Liang, Theory for intermetallic phase growth between Cu and liquid Sn-Pb solder based on grain boundary diffusion control. J. Electron. Mater. 27, 1167 (1998).10.1007/s11664-998-0066-7 ↗
15. F. Chang, Y. Lin, H. Hung, C. Kao, and C. Kao, Artifact-free microstructures in the interfacial reaction between eutectic In-48Sn and Cu using ion milling. Intermetallics 16, 3290 (2023).
16. M. Yang, M. Li, L. Wang, Y. Fu, J. Kim, and L. Weng, Growth behavior of Cu6Sn5 grains formed at an Sn3.5Ag/Cu interface. Mater. Lett. 65, 1506 (2011).10.1016/j.matlet.2011.02.056 ↗
17. M. Yang, Y. Cao, S. Joo, H. Chen, X. Ma, and M. Li, Cu6Sn5 precipitation during Sn-based solder/Cu joint solidification and its effects on the growth of interfacial intermetallic compounds. J. Alloys. Compd. 582, 688 (2014).10.1016/j.jallcom.2013.08.013 ↗
18. M. Schaefer, W. Laub, J. Sabee, and R. Fournelle, A numerical method for predicting intermetallic layer thickness developed during the formation of solder joints. J. Electron. Mater. 25, 992 (1996).10.1007/BF02666735 ↗
19. S. Sommadossi, W. Gust, and E. Mittemeijer, Characterization of the reaction process in diffusion soldered Cu/In-48 at.% Sn/Cu joints. Mater. Chem. Phys. 77, 924 (2003).10.1016/S0254-0584(02)00192-X ↗
20. D.L. Han, Y.A. Shen, F. Huo, and H. Nishikawa, Microstructure evolution and shear strength of tin-indium-xCu/Cu joints. Metals 12, 33 (2022).10.3390/met12010033 ↗
21. D. Kim and S. Jung, Interfacial reactions and growth kinetics for intermetallic compound layer between In-48Sn solder and bare Cu substrate. J. Alloy. Compd. 386, 151 (2005).10.1016/j.jallcom.2004.05.055 ↗
22. T. Chuang, C. Yu, S. Chang, and S. Wang, Phase identification and growth kinetics of the intermetallic compounds formed during In-49Sn/Cu soldering reactions. J. Electron. Mater. 31, 640 (2002).10.1007/s11664-002-0136-1 ↗
23. O. Abdelhadi and L. Ladani, Effect of joint size on microstructure and growth kinetics of intermetallic compounds in solid–liquid inter diffusion Sn3.5Ag/Cu-substrate solder joints. J. Electron. Packag. 135, 021004 (2013).10.1115/1.4023846 ↗
24. Z. Li, L. Cheng, G. Li, J. Huang, and Y. Tang, Effects of joint size and isothermal aging on interfacial IMC growth in Sn-3.0Ag-0.5Cu-0.1TiO2 solder joints. J. Alloy. Compd. 697, 104 (2017).10.1016/j.jallcom.2016.12.131 ↗
25. C. Rao, D. Fernandez, V. Kripesh, and K. Zeng, Effect of solder volume on diffusion kinetics and mechanical properties of microbump solder joints. IEEE Conf 697, 423 (2010).
26. T. Iida and R. Guthrie, The Physical Properties of Liquid Metals (Oxford: Clarendon Press, 1988).
27. J. London and D. Ashall, Brazing and Soldering 11 (Incorporated: McGraw-Hill Book Company, 1986).
28. Y.S. Chiu, H.Y. Yu, H.T. Hung, Y.W. Wang, and C.R. Kao, Phase formation and microstructure evolution in Cu/In/Cu joints. Microelectron. Reliab. 95, 18 (2019).10.1016/j.microrel.2019.02.004 ↗
29. C. Yu, S. Wang, and T. Chuang, Intermetallic compounds formed at the interface between liquid indium and copper substrates. J. Electron. Mater. 31, 488 (2001).10.1007/s11664-002-0104-9 ↗
30. H. Kim and K. Tu, Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening. Phys. Rev. B 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
31. M. Park and R. Arroyave, Early stages of inter-metallic compound formation and growth during lead-free soldering. Acta Mater. 58, 4900 (2010).10.1016/j.actamat.2010.05.028 ↗
32. M. Park and R. Arroyave, Formation and growth of intermetallic compound Cu6Sn5 at early stages in lead-free soldering. J. Electron. Mater. 39, 2574 (2010).10.1007/s11664-010-1353-7 ↗
33. Y. Park, Y. Kwon, Y. Lee, J. Lee, and K. Paik, Effects of fine size lead-free solder ball on the interfacial reactions and joint reliability. Electron. Compon. Technol. Conf. 39, 1436 (2010).
34. M. Islam, A. Sharif, and Y. Chan, Effect of volume in interfacial reaction between eutectic Sn-3.5%Ag-0.5% Cu solder and Cu metallization in microelectronic packaging. J. Electron. Mater. 34, 143 (2005).10.1007/s11664-005-0225-z ↗
35. F. Sun, Y. Zhu, and X. Li, Effects of micro solder joint geometry on interfacial IMC growth rate. J. Electron. Mater. 46, 4034 (2017).10.1007/s11664-017-5344-9 ↗
36. A. Sharif, Y. Chan, and R. Islam, Effect of volume in interfacial reaction between eutectic Sn-Pb solder and Cu metallization in micro-electronic packaging. Mater. Sci. Eng. B 106, 120 (2004).10.1016/j.mseb.2003.09.003 ↗
37. S. Wang, Y. Yao, and X. Lu, Size effect on microstructure and tensile properties of Sn3.0Ag0.5Cu solder joints. J. Mater. Sci. Mater. Electron. 28, 17682 (2017).10.1007/s10854-017-7706-8 ↗
38. W. Li, M. Zhou, H. Qin, X. Ma, and X. Zhang, Experimental and numerical study of the size effect on microstructure and mechanical behavior of Cu/Sno.7Cuo.05Ni/Cu joints with very small solder volume. in International Conference on Electronic Packaging Technology & High Density Packaging 39, 749 (2012).10.1109/ICEPT-HDP.2012.6474723 ↗
39. A. Roy, A. Luktuke, N. Chawla, and K. Ankit, Predicting the Cu6Sn5 growth kinetics during thermal aging of Cu-Sn solder joints using simplistic kinetic modeling. J. Electron. Mater. 51, 4063 (2022).10.1007/s11664-022-09643-2 ↗
40. M. Park, S. Gibbons, and R. Arroyave, Phase-field simulations of intermetallic compound growth in Cu/Sn/Cu sandwich structure undertransient liquid phase bonding conditions. Acta Mater. 60, 6278 (2012).10.1016/j.actamat.2012.07.063 ↗