journal article·2020-01

Time Independent Deformation of a Sn-Ag-Bi Pb-Free Solder: Stress–Strain Deformation and Yield Stress Properties

Paul T. Vianco, Bonnie B. McKenzie, Jerome A. Rejent, J. Mark Grazier, Celedonio E. Jaramillo, Alice C. Kilgo

Journal of Electronic Materials· Volume 49· Issue 1
Publisher page

Abstract

This study examined the yield stress and stress–strain deformation of the 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) solder as part of an overall effort to develop a computational model for predicting solder joint reliability. These properties were obtained by compression testing and correlated with the role of Bi in the microstructure by scanning electron microscopy. The strain rates were 4.2 × 10−5 s−1 and 8.3 × 10−4 s−1. The test temperatures ranged from − 25°C to 160°C. Samples were tested in the as-fabricated condition or following a 24-h aging treatment at either 125°C or 150°C. The yield stress decreased monotonically with test temperature at both strain rates for Sn-Ag-Bi in the as-fabricated condition. The 125°C, 24 h aging treatment increased the yield stress measured at 25°C, 75°C, and 125°C, but left it unchanged at − 25°C and 160°C. The 150°C aging treatment caused a cross-over effect at approximately 30°C and 70°C for the 4.2 × 10−5 s−1 and 8.3 × 10−4 s−1 strain rates, respectively. Work softening was observed; its source was a combination of continuous dynamic recrystallization and the Portevin–Le Chatelier effect. The latter phenomenon was solely responsible for fluctuations in the stress–strain curves. Significant variations were observed for the Bi-rich structures as a function of aging treatment as well as following deformation, yet yield stress and plastic deformation performance remained predictable under these very high homologous temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. P. Snugovsky, S. Bagheri, M. Romansky, D. Perovic, L. Snugovsky, and J. Rutter, J. Surf. Mount Technol. 25, 42 (2012).
2. P. Vianco and J. Rejent, US Patent 5,439,639 (1995).
3. P. Vianco and J. Rejent, J. Electron. Mater. 28, 1131 (1999).
4. P. Vianco and J. Rejent, J. Electron. Mater. 28, 1139 (1999).
5. P. Vianco, I. Artaki, and A. Jackson, in Proceedings of Surface Mount International Conference (1994), pp. 437–448.
6. I. Artaki, D. Finley, A. Jackson, U. Ray, and P. Vianco, in Proceedings of Surface Mount International Conference (1995), pp. 495–500.
7. P. Vianco and P. Mizik, in Proceedings of 7th International Sample Materials Processes Electronics Conference (1994), pp. 366–380.
8. P. Vianco, J. Rejent, I. Artaki, U. Ray, D. Finley, and A. Jackson, in Proceedings of 46th Electronic Components and Technology Conference (1996), pp. 1172–1183.
9. P. Snugovsky, S. Bagheri, M. Romansky, D. Perovic, L. Snugovsky, and J. Rutter, J. SMTA 25, 32 (2012).
10. M. Sampathkumar, S. Rajesnayagham, S. Ramkumar and S. Anson, in Proceedings of Surface Mount Technology Association International Conference (2005), pp. 568–575.
11. P. Vianco, J. Rejent, I. Artaki, and U. Ray, in Proceedings of IPCWorks’99 (1999), pp. S-03-3–S-03-19.
12. A. Delhaise, P. Snugovsky, I. Matijevic, J. Kennedy, M. Romansky, D. Hillman, D. Adams, S. Meschter, J. Juarez, M. Kammer, I. Straznicky, L. Snugovsky, and D. Perovic, in Proceedings of the International Conference on Soldering and Reliability (2017), pp. 576–585.
13. I. Matijevic, Masters of Sci. thesis, University of Toronto, Toronto, Ontario, Canada, 2016.
14. Z. Hai, J. Zhang, C. Shen, E.K. Snipes, J.C. Suhling, M.J. Bozack, and J.L. Evans, J. Surf. Mount Technol. 27, 11 (2014).
15. P. Vianco and C. May, in Proceedings of Surface Mount International Conference (1995), pp. 481–496.
16. P. Vianco, A. Kilgo, and R. Grant, J. Electron. Mater. 24, 1493 (1995).10.1007/BF02655468 ↗
17. M. McCormack, H. Chen, G. Kammlott, and S. Jin, J. Electron. Mater. 26, 954 (1997).10.1007/s11664-997-0281-7 ↗
18. M. Ribas, A. Kummar, D. Kosuri, R. Raghu, R. Rangaraju, P. Choudhury, S. Telu, and S. Sarkar, in Proceedings of SMTA International Conference (2017), pp. 201–205.
19. H. Hata, Y. Maruya, and I. Shohji, Mater. Trans. Jpn. Inst. Met. 57, 887 (2016).
20. D. Pierce, S. Sheppard, A. Fossum, P. Vianco, and M. Neilsen, J. Electron. Packag. (2008). https://doi.org/10.1115/1.2837513 .10.1115/1.2837513 ↗
21. M. Neilsen and P. Vianco, J. Electron. Packag. (2014). https://doi.org/10.1115/1.4026851 .10.1115/1.4026851 ↗
22. P. Vianco, J. Rejent, and A. Kilgo, J. Electron. Mater. 32, 142 (2003).10.1007/s11664-003-0185-0 ↗
23. P. Vianco, J. Rejent, and A. Kilgo, J. Electron. Mater. 33, 1389 (2004).10.1007/s11664-004-0169-8 ↗
24. P. Vianco, J. Rejent, and A. Kilgo, J. Electron. Mater. 33, 1473 (2004).10.1007/s11664-004-0089-7 ↗
25. P. Vianco, J. Rejent, A. Fossum, and M. Neilsen, Lead-Free Electronic Solders, ed. K. Subramanian (New York: Springer, 2006), p. 93.
26. P. Vianco, J. Rejent, M. Grazier, and A. Kilgo, Materials 5, 2151 (2012).10.3390/ma5112151 ↗
27. D. Witkin, J. Electron. Mater. 41, 190 (2012).10.1007/s11664-011-1748-0 ↗
28. D. Witkin, in Proceedings of IPC APEX EXPO Conference and Exhibition (2013), pp. 540–560.
29. Standard Test Methods for Compression Testing of Metallic Materials at Room Temperature: ASTM E9-89A (ASTM, West Conshohocken, 1995), pp. 101–103.
30. Standard Test Methods for Young’s Modulus, Tangent Modulus, and Chord Modulus: ASTM E111-82 (ASTM, West Conshohocken, 1995) pp. 1–7.
31. A. de Silva Scari, B. Pockszevnicki, J. Junior, and P. Junior, J. Struct. (2014). https://doi.org/10.1155/2014/387680 .10.1155/2014/387680 ↗
32. J. Embury, D. Lloyd, and T. Ramachandran, Aluminum Alloys: Contemporary Research and Applications, ed. A. Vasudevan and R. Doherty (Cambridge: Academic Press, 1989), pp. 579–601.
33. O. Ryen, O. Nijs, E. Sjolander, B. Holmedel, H.-E. Ekstrom, and E. Nes, Metal. Mater. Trans. A 37A, 1999 (2006).10.1007/s11661-006-0142-7 ↗
34. C. Caceres and D. Rovera, J. Light Met. 1, 151 (2001).10.1016/S1471-5317(01)00008-6 ↗
35. T. Tanaka and S. Watanabe, Acta Metall. Mater. 19, 991 (1971).10.1016/0001-6160(71)90030-7 ↗
36. H. Suga, Y. Sueki, M. Higuchi, and T. Imura, Jpn. J. Appl. Phys. 15, 379 (1976).10.1143/JJAP.15.379 ↗
37. L. Gao, R. Chen, and E. Han, J. Alloy Compd. 472, 234 (2009).10.1016/j.jallcom.2008.04.049 ↗
38. H. Roth, C. Davis, and R. Thomson, Metall. Mater. Trans. A 28A, 1329 (1997).10.1007/s11661-997-0268-2 ↗
39. M. Donachie and S. Donachie, Superalloys, a technical guide, 2nd ed. (West Conshohocken: ASM, International, Materials Park, 2002), pp. 1–9.10.31399/asm.tb.stg2.9781627082679 ↗
40. F. Mohamed, Mater. Sci. Eng. 38, 73 (1979).10.1016/0025-5416(79)90034-X ↗
41. F. Mohamed, K. Murty, and J. Morris, Metall. Trans. A 4, 935 (1973).10.1007/BF02645593 ↗
42. S.-W. Chung, H. Watanabe, W.-J. Ki, and K. Higashi, Mater. Trans. Jpn. Inst. Met. 45, 1266 (2004).
43. P. Chaudhury and F. Mohamed, Metall. Trans. A 18A, 2105 (1987).10.1007/BF02647082 ↗
44. T. Sakai and J. Jones, Acta Metall. Mater. 32, 189 (1984).10.1016/0001-6160(84)90049-X ↗
45. H. McQueen, Mater. Sci. Eng. A 387–389, 203 (2004).10.1016/j.msea.2004.01.064 ↗
46. F. Thijssen, Ph.D. thesis, Utrecht University, 2004.
47. A. Yilmaz, Sci. Technol. Adv. Mat. (2011). https://doi.org/10.1088/1468-6996/12/6/063001 .10.1088/1468-6996/12/6/063001 ↗
48. W. Ozgowicz and B. Grzegorcyk, J. Achiev. Mater. Man. Eng. 31, 281 (2008).
49. M.-S. Tsai, P.-L. Sun, P.-W. Kao, and C.-P. Chang, Mater. Trans. 50, 771 (2009).10.2320/matertrans.MRA2008468 ↗
50. S. Bhat and C. Laird, Acta Metall. Mater. 27, 1861 (1979).10.1016/0001-6160(79)90077-4 ↗
51. T. Nakajima, S. Spigarelli, E. Evangelista, and T. Endo, Mater. Trans. Jpn. Inst. Phys. 44, 1802 (2003).10.2320/matertrans.44.1802 ↗
52. S. Spigarelli, E. Cerri, P. Bianchi, and E. Evangelista, Mater. Sci. Technol. 15, 1433 (1999).10.1179/026708399101505428 ↗
53. T. Nakajima, M. Takeda, and T. Endo, Mater. Trans. Jpn. Inst. Phys. 47, 1098 (2006).10.2320/matertrans.47.1098 ↗
54. P. Shewmon, Transformations in Metals (New York: McGraw-Hill, 1969), pp. 314–315.
55. R. Balluffi and A. Ruoff, J. Appl. Phys. 34, 1634 (1963).10.1063/1.1702647 ↗
56. A. Ruoff and R. Balluffi, J. Appl. Phys. 34, 1848 (1963).10.1063/1.1729698 ↗
57. A. Ruoff and R. Balluffi, J. Appl. Phys. 34, 2862 (1963).10.1063/1.1729822 ↗
58. A. Ruoff, J. Appl. Phys. 38, 3999 (1967).10.1063/1.1709056 ↗
59. N. Vo, S. Odunuga, P. Bellon, and R. Averback, Acta Mater. 57, 3012 (2009).10.1016/j.actamat.2009.03.007 ↗
60. J. Guo, J. Rosalie, R. Pippan, and Z. Zhang, Scr. Metall. Mater. 13341 (2017).