journal article·2023-05

Synthesis of Cu Nanowires by Template Electrodeposition and Their Application in Pressure Sensors

Zhi-Chao Meng, Li-Yin Gao, Zhi-Quan Liu

Journal of Electronic Materials· Volume 52· Issue 5
Publisher page

Abstract

Electrodeposition of Cu within a porous anodic aluminum oxide template was used to synthesize Cu nanowires. Current density and deposition time had an influence on the growth mechanism of the nanowires. The suitable current density for nanowires growth was 15 mA/cm2, which could not only obtain high quality but also ensured deposition efficiency. The diameter of the Cu nanowires was about 200 nm, being consistent with the template pore size, while the length of the nanowires had a linear growth rate of approximately 1.97 μm/min. Nanowires of different lengths could be obtained by controlling the deposition time. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used to reveal the Cu nanowires’ crystal structure and morphology. An individual nanowire was a single crystal, and the uniformity of the nanowires could be kept after removal from the template. The nanowires were impregnated in a sponge skeleton and put on to interdigitated electrodes, covered by a polydimethylsiloxane film to make a pressure sensor. After 3 times dipping into the sponge, the pressure sensor had an appropriate content of nanowires, which could be deformed to make more Cu nanowires contacting with each other between different layers and the interdigital electrode. As a result, the pressure sensor worked successfully with more conductive pathways.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R. Bian, L. Meng, M. Zhang, L. Chen, and H. Liu, Aligning one-dimensional nanomaterials by solution processes. ACS Omega 4(1), 1816–1823 (2019).10.1021/acsomega.8b02700 ↗
2. Y. Li, S. Ruan, X. Xu, R. Zou, and J. Hu, One-dimensional nanomaterial-assembled macroscopic membranes for water treatment. Nano Today 17, 79–95 (2017).10.1016/j.nantod.2017.10.012 ↗
3. X. Ma, L. Wen, M. Yan, H. Liang, and L. Mai, In situ characterization of electrochemical processes in one dimensional nanomaterials for energy storages devices. Nano Energy 24(1), 165–188 (2016).10.1016/j.nanoen.2016.03.023 ↗
4. M. Shinde and H. Kim, Highly stable silver nanowire-based transparent conductive electrodes for electrochromic devices. Mater. Today Commun. 26(1), 102147 (2021).10.1016/j.mtcomm.2021.102147 ↗
5. M. Singh and S. Rana, Silver and copper nanowire films as cost-effective and robust transparent electrode in energy harvesting through photovoltaic: a review. Mater. Today Commun. 24(1), 101317 (2020).10.1016/j.mtcomm.2020.101317 ↗
6. B. Yxa, Z. Yu, B. Xla, A. Pz, A. Yh, and S. Rong, A flexible pressure sensor based on melamine foam capped by copper nanowires and reduced graphene oxide. Mater. Today Commun. 24(1), 100970 (2020).
7. F. Zhang, X. Chen, X. Li, H. Zhou, C. Li, and M. Zhou, Preparation and characterization of polyimide/multiple-wall carbon nanotubes composites. IOP Conf. Ser.: Earth Environ. Sci. 632(5), 052090 (2021).10.1088/1755-1315/632/5/052090 ↗
8. V.L. Interrante, Special issue on organic inorganic nanocomposite materials. Chem. Mater. 12(7), 1807–1807 (2000).10.1021/cm002003g ↗
9. Z. Yu, L. Yuan, D. Wang, M. Yuan, Z. Hu, and H. Li, Size tunable Ga–Ge nanowires for Li-ion battery prepared by in situ alloying in ionic liquid electrodeposition. Appl. Surf. Sci. 508(1), 144852 (2019).
10. P. Fu, G. Chen, Y. Xu, P. Cai, and X.H. Wang, Electrodeposition and magnetic properties of ternary Fe-Co-Ni alloy nanowire arrays with high squareness ratio. Mater. Sci.-Pol. 30(3), 259–263 (2012).10.2478/s13536-012-0031-2 ↗
11. Z.C. Meng, Z.Q. Liu, Preparation of Sn nanosheets by electrodeposition in polycarbonate template. International Conference on Electronic Packaging Technology (ICEPT), 2019, A114.10.1109/ICEPT47577.2019.245128 ↗
12. Q. Cui, K. Rajathurai, W. Jia, X. Li, F. Gao, and Y. Lei, Synthesis of single crystalline tin nanorods and their application as nanosoldering materials. J. Phys. Chem. C 114(50), 21938–21942 (2010).10.1021/jp105969x ↗
13. Z. Zhu, S. Wang, J. Du, Q. Jin, T. Zhang, and F. Cheng, Ultrasmall Sn nanoparticles embedded in nitrogen-doped porous carbon as high-performance anode for lithium-ion batteries. Nano Lett. 14(1), 153–157 (2014).10.1021/nl403631h ↗
14. A. Xz, H. Zheng, H.C. Ming, Y. Zhao, J. Qu, and S. Hu, Au nanowires with high aspect ratio and atomic shell of Pt-Ru alloy for enhanced methanol oxidation reaction. Chin. Chem. Lett. 32(6), 2033–2037 (2020).
15. W.W. He and H. Chang, Flexible transparent conductive films on the basis of ag nanowires: design and applications: a review. J. Mater. Sci. Technol. 31(6), 581–588 (2015).10.1016/j.jmst.2014.11.020 ↗
16. Q.Y. Yin, F. Gao, Z.Y. Gu, Y. Zhao, J. Qu, and S. Hu, Interface dynamics in one-dimensional nanoscale Cu/Sn couples. Acta Mater. 125(1), 136–144 (2017).10.1016/j.actamat.2016.11.051 ↗
17. M. Ranjana, V. Ramesh, T. Babu, and D. Kumar, Sophorolipid induced hydrothermal synthesis of Cu nanowires and its modulating effect on Cu nanostructures. Nano Struct. Nano Objects 18, 1–7 (2019).10.1016/j.nanoso.2019.100285 ↗
18. C. Cheng, Z. Han, Y. Liu, J. Cheng, J. Yang, and X. Wang, Controllable synthesis and growth mechanism of lead free bismuth sodium titanate nanowires. Ceram. Int. 43, 11580 (2017).10.1016/j.ceramint.2017.05.115 ↗
19. C.R. Martin, Membrane-based synthesis of nanomaterials. Chem. Mater. 8(8), 1739–1746 (1996).10.1021/cm960166s ↗
20. S. Gong, W. Schwalb, Y. Wang, Y. Chen, Y. Tang, S. Jye, S. Bijan, and C. Wenlong, A wearable and highly sensitive pressure sensor with ultrathin gold nanowires. Nat. Commun. 5, 3132 (2014).10.1038/ncomms4132 ↗
21. X. Liu, Y. Zhu, M. Nomani, X. Wen, T. Hsia, and G. Koley, A highly sensitive pressure sensor using a au-patterned polydimethylsiloxane membrane for biosensing applications. J. Micromech. Microeng. 23(2), 025022 (2013).10.1088/0960-1317/23/2/025022 ↗
22. J. Cui, B. Zhang, J. Duan, H. Guo, and J. Tang, Flexible pressure sensor with Ag wrinkled electrodes based on PDMS substrate. Sensors 16(12), 1 (2016).10.3390/s16122131 ↗
23. K. Kumari, R. Reeshma, D.S. Arun, S. Meti, and M.R. Rahman, Fabrication of Ag/PDMS-TiO2 flexible piezoresistive pressure sensor. Physica B 597, 412386 (2020).10.1016/j.physb.2020.412386 ↗
24. R. Martha and H.S. Nagaraja, Effect of current density and electrochemical cycling on physical properties of silicon nanowires as anode for lithium ion battery. Mater. Charact. 129, 24–30 (2017).10.1016/j.matchar.2017.04.001 ↗
25. B. Gca, B. Dya, C. Rong, B. Jla, Z. Xun, and L. Qiang, Enhanced efficiency for carbon dioxide electroreduction to formate by electrodeposition Sn on Cu nanowires. J. CO2 Util. 44, 1009 (2021).
26. K.H. Kuo, H.Q. Ye, and Y.K. Wu, The Application of Electron Diffraction Pattern in Crystallography (Beijing: Science Press, 1980).
27. Z.C. Meng, L.Y. Gao, and Z.Q. Liu, Synthesis of Sn nanowire by template electrodeposition and its conversion into Sn nanosolder. Mater. Charact. 163, 110278 (2020).10.1016/j.matchar.2020.110278 ↗
28. C.F. Li, and Z.Q. Liu, Microstructure and growth mechanism of tin whiskers on RESn_3 compounds. Acta Mater. 61(2), 589–601 (2013).10.1016/j.actamat.2012.09.080 ↗
29. C.F. Li, Z.Q. Liu, P.J. Shang, and J.K. Shang, In Situ investigation on the oxidation behavior of a RESn(3) film by transmission electron microscopy. Scripta Mater. 65(12), 1049–1052 (2011).10.1016/j.scriptamat.2011.09.006 ↗