journal article·2016-08

Fabrication and Characterization of TiO2 Nano Rods by Electrochemical Deposition into an Anodic Alumina Template

Muhammad Ikraam, Sammia Shahid, Sabah Zaman, M. N. Sarwar

Journal of Electronic Materials· Volume 45· Issue 8
Publisher page

Abstract

Titanium dioxide (TiO2) nanorods have been successfully grown into a track-etched anodized aluminium oxide membrane (AAM) by a particulate electrochemical deposition from an aqueous medium. The prepared TiO2 sols get stabilized against aging at pH 2. It was found that TiO2 nanorods grown from dilute aqueous solution with a low concentration gave a stable and uniform growth. X-ray diffraction (XRD) results revealed that TiO2 nanorods dried at 500°C were a mixture of anatase and brookite phases. Atomic Force Microscope (AFM) images confirmed that TiO2 nanorods had a smooth morphology and longitudinal uniformity in diameter. A scanning electron microscope (SEM) image showed that TiO2 nanorods grown by electrochemical deposition from the dilute aqueous sol had a dense structure and possessed a repetitive pattern, containing small particles with an average size of 15 nm. Based on kinetic studies, it was found that uniform TiO2 nanorods with high-quality morphology were obtained under optimum conditions at an applied potential of 5 V, a uniform current density of 500 mA, and a deposition time of 5 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · TiO2 Photocatalysis and Solar Cells · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. D.W. Bahnemann, M. Hilgendorff, and R. Memming, J. Phys. Chem. B 101, 4265 (1997).10.1021/jp9639915 ↗
2. H.C. Zeng, in The Dekker Encyclopedia of Nanoscience and Nanotechnology. (Marcel Dekker, New York, 2004), pp. 2539–2550.
3. C.L. Olson, J. Nelson, and M.S. Islam, J. Phys. Chem. B 110, 9995 (2006).10.1021/jp057261l ↗
4. L. Xeubing and E. Iglesia, Angew. Chem. Int. Ed. Engl. 46, 8649 (2007).10.1002/anie.200700593 ↗
5. A. Furube, L. Du, K. Hara, R. Katoh, and M. Tachiya, J. Am. Chem. Soc. 129, 14852 (2007).10.1021/ja076134v ↗
6. J. Nowotny, T. Bak, M.K. Nowtny, and L.R. Sheppard, Int. J. Hydrog. Energy 32, 2630 (2007).10.1016/j.ijhydene.2006.09.005 ↗
7. M.K. Nowotny, L.R. Sheppard, T. Bak, and J. Nowotny, J. Phys. Chem C. 112, 5275 (2008).10.1021/jp077275m ↗
8. A.L. Linsebigle, R.L. Guangquan, and J.T. Yates, Chem. Rev. 95, 735 (1995).10.1021/cr00035a013 ↗
9. P.V. Kamat, Chem. Rev. 93, 267 (1993).10.1021/cr00017a013 ↗
10. P. Roy, S. Berger, and P. Schmuki, Angew. Chem. Int. Ed. Engl. 50, 2904 (2011).10.1002/anie.201001374 ↗
11. C. Su, B.Y. Hong, and C.M. Tseng, Catal. Today 96, 119 (2004).10.1016/j.cattod.2004.06.132 ↗
12. H.J. Yun, H. Lee, J.B. Joo, W. Kim, and J. Yi, J. Phys. Chem. C 113, 3050 (2009).10.1021/jp808604t ↗
13. R. Beranek, H. Hildebrand, and P. Schmuki, Elecrochem. Solid state lett. 6, B12 (2003).10.1149/1.1545192 ↗
14. O.K. Varghese, D. Gong, M. Paulose, K.G. Ong, E.C. Dickey, and C.A. Grimes, J. Adv. Mater. 15, 624 (2003).10.1002/adma.200304586 ↗
15. E.M. Guerrra and M. Mulato, Mater. Sci. Appl. 5, 459 (2014).
16. R. Clarke, R. Hill, and D.R. Roberts, J. Chem. Technol. Biotechnol. 68, 397 (1997).10.1002/(SICI)1097-4660(199704)68:4<397::AID-JCTB635>3.0.CO;2-F ↗
17. A. Birner, R. Wehrspohn, U.G. Sele, and K. Busch, J. Adv. Mater. 13, 377 (2001).10.1002/1521-4095(200103)13:6<377::AID-ADMA377>3.0.CO;2-X ↗
18. C. Haginoya, M. Ishibashi, and K. Koike, Appl. Phys. Lett. 71, 2934 (1997).10.1063/1.120220 ↗
19. H. Masuda, M. Yotsuya, M. Asano, K. Nishio, M. Nakano, A. Yokoo, and T. Tamamura, Appl. Phys. Lett. 78, 828 (2001).10.1063/1.1344575 ↗
20. H. Imai, Y. Takei, K. Shimizu, M. Matsuda, and H. Hirashima, J. Mater. Chem. 9, 2971 (1999).10.1039/a906005g ↗
21. P. Hoyer, J. Adv. Mater. 8, 857 (2004).10.1002/adma.19960081022 ↗
22. Z. Miao, D. Xu, J. Ouyang, G. Guo, X. Zhao, and Y. Tang, Nano Lett. 2, 717 (2002).10.1021/nl025541w ↗
23. D. Gong, C.A. Grimes, O.K. Varghese, W. Hu, R.S. Singh, Z. Chen, and E.C. Dickey, J. Mater. Res. 16, 3331 (2001).10.1557/JMR.2001.0457 ↗
24. O. Jessensky, F. Muller, and U. Gosele, Appl. Phys. Lett. 72, 1173 (1998).10.1063/1.121004 ↗
25. C.R. Martin, Chem. Mater. 8, 1739 (1996).10.1021/cm960166s ↗
26. J.C. Hulteen and C.R. Marter, J. Mater. Chem. 7, 1075 (1997).10.1039/a700027h ↗
27. E.J.P. Gerrard, A. Nurshahidah, and F. Derek, Materials 4, 487 (2011).10.3390/ma4030487 ↗
28. A. Nourmohammadi, M. Mehrjuee, and M.A. Bahrevar, IJE. Trans. B: Appl. 25, 343 (2012).
29. M.R. Mohammadi, F. Ordikhani, D.J. Fray, and F. Khomamizadeh, Particuology 9, 161–169 (2011).10.1016/j.partic.2010.07.026 ↗
30. M.A. Kashi and A. Ramazani, Int. J. Nanosci. Nanotechnol. 6, 78 (2010).
31. G.E. Thompson, Y. Xu, P. Skeldon, K. Shimizu, S.H. Han, and G.C. Wood, Philos. Mag. B 55, 651 (1987).10.1080/13642818708218371 ↗
32. S.J. Garcia-Vergarai, L. Iglesias-Rubianes, C.E. Blanco-Pinzon, P. Skeldon, G.E. Thompson, and P. Campestrini, Proc. R. Soc. Lond. A. 462, 2345 (2006).10.1098/rspa.2006.1686 ↗
33. L. Feiyue, L. Zhang, and R.M. Metzger, Chem. Mater. 10, 2470 (1998).10.1021/cm980163a ↗
34. S. Xu and Z.L. Wang, Nano Res. 4, 1013 (2011).10.1007/s12274-011-0160-7 ↗