Mechanical Failure of Cu-Sn Solder Joints
Source abstract
Abstract
The effects of the microstructure on the fracture mechanisms of Cu-Sn intermetallic compounds (IMC) in solder joints under tensile load are studied with numerical simulations. When solder joints are exposed to elevated temperature environments Cu $$_6$$ Sn $$_5$$ and Cu $$_3$$ Sn nucleate and grow due to the reaction of Cu and Sn, and the fracture strength is degraded. During early stages of the thermal treatment, the Cu $$_3$$ Sn layer of the IMC is thin and composed of a single stack of grains, and the simulations indicate that failure occurs at the Cu $$_6$$ Sn $$_5$$ /Cu $$_3$$ Sn interface. After hundreds of hours at temperatures over 150 $$^\circ $$ the Cu $$_3$$ Sn layer thickness grows and is composed of a stack of several grains. Then, failure switches to intergranular fracture inside the Cu $$_3$$ Sn layer. Therefore, the reduction of the fracture strength is a consequence of a transition in the Cu $$_3$$ Sn layer from a single stack of grains to a multi-stacked structure. This structural transition occurs by the reduction of grain size and the growth of the Cu $$_3$$ Sn layer thickness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Z. Huang, P. Kumar, I. Dutta, J.H.L. Pang, R. Sidhu, M. Renavikar, R. Mahajan, J. Electron. Mater. 41(2), 375 (2012)10.1007/s11664-011-1769-8 ↗
2. Q.K. Zhang, Z.F. Zhang, J. Alloys Compd. 485(1–2), 853 (2009)10.1016/j.jallcom.2009.06.108 ↗
3. T. An, F. Qin, Microelectron. Reliab. 54(5), 932 (2014)10.1016/j.microrel.2014.01.008 ↗
4. K.E. Yazzie, H.E. Fei, H. Jiang, N. Chawla, Acta Mater. 60(10), 4336 (2012)10.1016/j.actamat.2012.04.018 ↗
5. K.E. Yazzie, H.X. Xie, J.J. Williams, N. Chawla, Scr. Mater. 66(8), 586 (2012)10.1016/j.scriptamat.2012.01.009 ↗
6. C. Yang, G. Xu, S.W. Ricky Lee, X. Zhang, Brittle fracture of intermetallic compounds in SAC solder joints under high speed ball pull/pin pull and charpy impact tests. In 2013 IEEE 63rd Electronic Components and Technology Conference (2013), p. 1294.10.1109/ECTC.2013.6575739 ↗
7. C. Yang, F. Le, S.W. Ricky Lee, Microelectron. Reliab. 62, 130 (2016).10.1016/j.microrel.2016.03.021 ↗
8. H. Fei, K.E. Yazzie, N. Chawla, H. Jiang, J. Electron. Mater. 41(8), 2089 (2012)10.1007/s11664-012-2079-5 ↗
9. F. Qin, T. An, J. Electron. Packag. 138(1), 011002 (2016)10.1115/1.4032349 ↗
10. H. Qin, X. Zhang, Three-dimensional finite element analysis of mechanical and fracture behavior of micro-scale BGA structure solder joints containing cracks in the intermetallic compound layer. In 2012 13th International Conference on Electronic Packaging Technology & High Density Packaging, IEEE (2012), p. 1244.10.1109/ICEPT-HDP.2012.6474831 ↗
11. S. Akbari, A. Nourani, J. Spelt, J. Electron. Mater. 45(1), 473 (2016)10.1007/s11664-015-4133-6 ↗
12. R. Zhang, Y. Tian, C. Hang, B. Liu, C. Wang, Mater. Lett. 110, 137 (2013)10.1016/j.matlet.2013.07.116 ↗
13. W. Liu, Y. Tian, C. Wang, X. Wang, R. Liu, Mater. Lett. 86, 157 (2012)10.1016/j.matlet.2012.07.016 ↗
14. L. Mo, Z. Chen, F. Wu, C. Liu, Intermetallics 66, 13 (2015)10.1016/j.intermet.2015.06.019 ↗
15. J.F. Li, P.A. Agyakwa, C.M. Johnson, Acta Mater. 59(3), 1198 (2011)10.1016/j.actamat.2010.10.053 ↗
16. H.Y. Hsiao, C.M. Liu, H.W. Lin, T.C. Liu, C.L. Lu, Y.S. Huang, C. Chen, K.N. Tu, Sci. 336(6084), 1007 (2012)10.1126/science.1216511 ↗
17. J. Feng, C. Hang, Y. Tian, C. Wang, B. Liu, J. Alloys Compd. 753, 203 (2018)10.1016/j.jallcom.2018.04.041 ↗
18. P.J. Shang, Z.Q. Liu, X.Y. Pang, D.X. Li, J.K. Shang, Acta Mater. 57(16), 4697 (2009)10.1016/j.actamat.2009.06.025 ↗
19. B. Alger, D. Andrš, R.W. Carlsen, D.R. Gaston, F. Kong, A.D. Lindsay, J.M. Miller, C.J. Permann, J.W. Peterson, A.E. Slaughter, R. Stogner, MOOSE Web page, 2020. https://mooseframework.org.
20. J.C Simo, T.J Hughes, Computational Inelasticity, volume 7 of Interdisciplinary Applied Mathematics. (Springer-Verlag, Secaucus, 1998)
21. M. Ortiz, L. Stainier, Comput. methods Appl. Mech. Eng. 171(3–4), 419 (1999)10.1016/S0045-7825(98)00219-9 ↗
22. X. Cai, C.A. Handwerker, J.E. Blendell, M. Koslowski, Acta Mater. 192, 1 (2020)10.1016/j.actamat.2020.03.014 ↗
23. J.P. Tucker, D.K. Chan, G. Subbarayan, C.A. Handwerker, Microelectron. Reliab. 54(11), 2513 (2014)10.1016/j.microrel.2014.04.012 ↗
24. A. Zamiri, T.R. Bieler, F. Pourboghrat, J. Electron. Mater. 38(2), 231 (2009)10.1007/s11664-008-0595-0 ↗
25. M.L. Bauccio, ASM metals reference book, (ASM International, 1994).
26. C. Miehe, L.M. Schanzel, H. Ulmer, Comput. Methods Appl. Mech. Eng. 294, 449 (2015)10.1016/j.cma.2014.11.016 ↗
27. Y. Xie, O.G. Kravchenko, R.B. Pipes, M. Koslowski, J. Mech. Phys. Solids. 93, 182 (2016)10.1016/j.jmps.2015.12.021 ↗
28. C.A. Duarte, N. Grilli, M. Koslowski, J. Appl. Phys. 124(2), 025104 (2018)10.1063/1.5030656 ↗
29. A.A. Griffith, Philos. Trans. R. Soc. Series A. 221, 163 (1921)
30. G.A. Francfort, J.J. Marigo, J. Mech. Phys. Solids. 46(8), 1319 (1998)10.1016/S0022-5096(98)00034-9 ↗
31. Y. Xie, M. Koslowski, Model. Simul. Mater. Sci. Eng. 24(5), 055003 (2016)10.1088/0965-0393/24/5/055003 ↗
32. C. Miehe, F. Welschinger, M. Hofacker, Int. J. Numer. Methods Eng. 83(10), 1273 (2010)10.1002/nme.2861 ↗
33. P. Chakraborty, Y. Zhang, M.R. Tonks, Comput. Mater. Sci. 113(C), 38 (2016)10.1016/j.commatsci.2015.11.010 ↗
34. R.J. Fields, S.R. Low III, G.K. Lucey, The metal science of joining. In TMS Symp. Proc. (The Metallurgical Society, 1992), p. 165.
35. V.L. Nguyen, C.S. Chung, H.K. Kim, Microelectron. Reliab. 55(12), 2808 (2015)10.1016/j.microrel.2015.10.002 ↗
36. E. Buchovecky, N. Jadhav, A. Bower, E. Chason, J. Electron. Mater. 38(12), 2676 (2009)10.1007/s11664-009-0911-3 ↗
37. G. Ghosh, J. Mater. Res. 19(5), 1439 (2004)10.1557/JMR.2004.0193 ↗